ARM: dts: aspeed: mtjade: Remove gpio-keys entries

Remove the gpio-keys entries from the Ampere's Mt. Jade BMC device
tree. The user space applications are going to change from using
libevdev to libgpiod.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220915080828.2894070-1-quan@os.amperecomputing.comSigned-off-by: Joel Stanley <joel@jms.id.au>

arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts

@@ -97,101 +97,6 @@ identify {
 		};
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-shutdown-ack {
-			label = "SHUTDOWN_ACK";
-			gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(G, 2)>;
-		};
-
-		event-reboot-ack {
-			label = "REBOOT_ACK";
-			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 3)>;
-		};
-
-		event-s0-overtemp {
-			label = "S0_OVERTEMP";
-			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(G, 3)>;
-		};
-
-		event-s0-hightemp {
-			label = "S0_HIGHTEMP";
-			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 0)>;
-		};
-
-		event-s0-cpu-fault {
-			label = "S0_CPU_FAULT";
-			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(J, 1)>;
-		};
-
-		event-s0-scp-auth-fail {
-			label = "S0_SCP_AUTH_FAIL";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		event-s1-scp-auth-fail {
-			label = "S1_SCP_AUTH_FAIL";
-			gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 5)>;
-		};
-
-		event-s1-overtemp {
-			label = "S1_OVERTEMP";
-			gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 6)>;
-		};
-
-		event-s1-hightemp {
-			label = "S1_HIGHTEMP";
-			gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(AB, 0)>;
-		};
-
-		event-s1-cpu-fault {
-			label = "S1_CPU_FAULT";
-			gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(Z, 1)>;
-		};
-
-		event-id {
-			label = "ID_BUTTON";
-			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Q, 5)>;
-		};
-
-		event-psu1-vin-good {
-			label = "PSU1_VIN_GOOD";
-			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 4)>;
-		};
-
-		event-psu2-vin-good {
-			label = "PSU2_VIN_GOOD";
-			gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 5)>;
-		};
-
-		event-psu1-present {
-			label = "PSU1_PRESENT";
-			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 0)>;
-		};
-
-		event-psu2-present {
-			label = "PSU2_PRESENT";
-			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 1)>;
-		};
-
-	};
-
 	gpioA0mux: mux-controller {
 		compatible = "gpio-mux";
 		#mux-control-cells = <0>;