Commit 2e927ad7 authored by David Lin's avatar David Lin Committed by Mark Brown

ASoC: nau8822: support master mode

The driver selects the proper BCLK divide through the BCLK and FS
at the hardware parameter when the I2S master mode.
Signed-off-by: default avatarDavid Lin <CTLIN0@nuvoton.com>
Signed-off-by: default avatarJohn Hsu <KCHSU0@nuvoton.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 960f428c
......@@ -828,6 +828,24 @@ static int nau8822_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_component *component = dai->component;
struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component);
int val_len = 0, val_rate = 0;
unsigned int ctrl_val, bclk_fs, bclk_div;
/* make BCLK and LRC divide configuration if the codec as master. */
snd_soc_component_read(component, NAU8822_REG_CLOCKING, &ctrl_val);
if (ctrl_val & NAU8822_CLK_MASTER) {
/* get the bclk and fs ratio */
bclk_fs = snd_soc_params_to_bclk(params) / params_rate(params);
if (bclk_fs <= 32)
bclk_div = NAU8822_BCLKDIV_8;
else if (bclk_fs <= 64)
bclk_div = NAU8822_BCLKDIV_4;
else if (bclk_fs <= 128)
bclk_div = NAU8822_BCLKDIV_2;
else
return -EINVAL;
snd_soc_component_update_bits(component, NAU8822_REG_CLOCKING,
NAU8822_BCLKSEL_MASK, bclk_div);
}
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
......
......@@ -107,10 +107,17 @@
/* NAU8822_REG_CLOCKING (0x6) */
#define NAU8822_CLKIOEN_MASK 0x1
#define NAU8822_CLK_MASTER 0x1
#define NAU8822_CLK_SLAVE 0x0
#define NAU8822_MCLKSEL_SFT 5
#define NAU8822_MCLKSEL_MASK (0x7 << 5)
#define NAU8822_BCLKSEL_SFT 2
#define NAU8822_BCLKSEL_MASK (0x7 << 2)
#define NAU8822_BCLKDIV_1 (0x0 << 2)
#define NAU8822_BCLKDIV_2 (0x1 << 2)
#define NAU8822_BCLKDIV_4 (0x2 << 2)
#define NAU8822_BCLKDIV_8 (0x3 << 2)
#define NAU8822_BCLKDIV_16 (0x4 << 2)
#define NAU8822_CLKM_MASK (0x1 << 8)
#define NAU8822_CLKM_MCLK (0x0 << 8)
#define NAU8822_CLKM_PLL (0x1 << 8)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment