twl6030: regulator: Configure STATE register instead of REMAP

This is no REMAP register on twl6030, instead there is a STATE register
to drive a resource to a given state.
The state register can be used to specify what state the resource should
enter when its associated with a GRP.
Register Bit field description is as below. The patch programmes the
corresponding STATE registers for all LDO's to turn ON when assocaited
with GRP_P1.

STATE REG:
Bit7   |Bit6   |Bit5   |Bit4  |Bit3  |Bit2  |Bit1   |Bit0
P3_GRP |P2_GRP |P1_GRP |RES   |RES   |RES   |State1 |State0

State can be specified as below
00: OFF
01: ON
10: OFF
11: SLEEP
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

drivers/regulator/twl-regulator.c

@@ -519,16 +519,16 @@ static struct twlreg_info twl_regs[] = {
 	/* 6030 REG with base as PMC Slave Misc : 0x0030 */
 	/* Turnon-delay and remap configuration values for 6030 are not
 	   verified since the specification is not public */
-	TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1, 0, 0x08),
-	TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2, 0, 0x08),
-	TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3, 0, 0x08),
-	TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4, 0, 0x08),
-	TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5, 0, 0x08),
-	TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7, 0, 0x08),
-	TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x08),
-	TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x08),
-	TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x08),
-	TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x08)
+	TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1, 0, 0x21),
+	TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2, 0, 0x21),
+	TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3, 0, 0x21),
+	TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4, 0, 0x21),
+	TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5, 0, 0x21),
+	TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7, 0, 0x21),
+	TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x21),
+	TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x21),
+	TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x21),
+	TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x21)
 };
 
 static int twlreg_probe(struct platform_device *pdev)