Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "We continue ramping up platform support for 64-bit ARM machines, with
  111 individual non-merge changesets touching 21 platforms.

  The LG1312 platform is completely new and is the first ARM platform by
  LG that we support in the mainline kernel.  Two other SoCs got added
  that are updated versions of existing SoC families, so the port mainly
  consists of new dts files:

   - The Hisilicon Hip06/D03 is the latest server platform from
     Huawei/Hisilicon, and follows the Hip05/D02 platform.

   - Rockchip RK3399 follows the 32-bit RK3288 that is popular in
     low-end Chromebooks and the 64-bit RK3368 that is mainly found in
     chinese Android TV boxes.

  The 96Boards HiKey based on the Hisilicon Hi6220 (Kirin 620) gets a
  long-awaited overhaul with a lot of devices enabled in the DT, so it
  should be much more usable with a mainline kernel now.  See also

     https://plus.google.com/111524780435806926688/posts/PeGb2VsNhJd

  A lot of work went into enabling new device drivers on existing
  machines, but we also have a couple of new commercially available
  machines:

   - Google Pixel C laptop based on Tegra210
   - Hardkernel Odroid C2 Based on Amlogic Meson GXBB (S905)
   - Geekbuying GeekBox based on Rockchip RK3368

  And finally, a couple of reference or development platforms that are
  not end-user platforms but are used for trying out the respective SoC
  platforms:

   - Amlogic Meson GXBB P200 and P201 development systems
   - NXP Layerscape 1043A QDS development board
   - Hisilicon Hip06 D03 server board, as mentioned above
   - LG1312 Reference Design
   - RK3399 Evaluation Board"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
  arm64: dts: marvell: add XOR node for Armada 3700 SoC
  dt-bindings: document rockchip rk3399-evb board
  arm64: dts: rockchip: add dts file for RK3399 evaluation board
  arm64: dts: rockchip: add core dtsi file for RK3399 SoCs
  dt-bindings: rockchip-dw-mshc: add description for rk3399
  arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx
  arm64: dts: marvell: Rename armada-37xx USB node
  arm64: dts: marvell: Clean up armada-3720-db
  Documentation: arm64: Add Hisilicon Hip06 D03 dts binding
  arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
  arm64: dts: hip05: Add nor flash support
  arm64: dts: hip05: fix its node without msi-cells
  arm64: dts: r8a7795: Don't disable referenced optional clocks
  arm64: dts: salvator-x: populate EXTALR
  arm64: dts: r8a7795: enable PCIe on Salvator-X
  arm64: dts: r8a7795: Add PCIe nodes
  arm64: tegra: Add IOMMU node to GM20B on Tegra210
  arm64: tegra: Add reference clock to GM20B on Tegra210
  dt-bindings: Add documentation for GM20B GPU
  dt-bindings: gk20a: Document iommus property
  ...

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -25,3 +25,6 @@ Board compatible values:
   - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
+  - "hardkernel,odroid-c2" (Meson gxbb)
+  - "amlogic,p200" (Meson gxbb)
+  - "amlogic,p201" (Meson gxbb)

Documentation/devicetree/bindings/arm/fsl.txt

@@ -135,6 +135,10 @@ LS1043A ARMv8 based RDB Board
 Required root node properties:
     - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
 
+LS1043A ARMv8 based QDS Board
+Required root node properties:
+    - compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
+
 LS2080A ARMv8 based Simulator model
 Required root node properties:
     - compatible = "fsl,ls2080a-simu", "fsl,ls2080a";

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

 Hisilicon Platforms Device Tree Bindings
 ----------------------------------------------------
-Hi6220 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi6220";
-
 Hi4511 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3620-hi4511";
 
-HiP04 D01 Board
+Hi6220 SoC
 Required root node properties:
-	- compatible = "hisilicon,hip04-d01";
+	- compatible = "hisilicon,hi6220";
+
+HiKey Board
+Required root node properties:
+	- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
 
 HiP01 ca9x2 Board
 Required root node properties:
 	- compatible = "hisilicon,hip01-ca9x2";
 
-HiKey Board
+HiP04 D01 Board
 Required root node properties:
-	- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+	- compatible = "hisilicon,hip04-d01";
 
 HiP05 D02 Board
 Required root node properties:
 	- compatible = "hisilicon,hip05-d02";
 
+HiP06 D03 Board
+Required root node properties:
+	- compatible = "hisilicon,hip06-d03";
+
 Hisilicon system controller
 
 Required properties:

Documentation/devicetree/bindings/arm/rockchip.txt

@@ -39,6 +39,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "netxeon,r89", "rockchip,rk3288";
 
+- GeekBuying GeekBox:
+    Required root node properties:
+      - compatible = "geekbuying,geekbox", "rockchip,rk3368";
+
 - Google Brain (dev-board):
     Required root node properties:
       - compatible = "google,veyron-brain-rev0", "google,veyron-brain",
@@ -101,4 +105,8 @@ Rockchip platforms device tree bindings
 
 - Rockchip RK3228 Evaluation board:
     Required root node properties:
-      - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+     - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+
+- Rockchip RK3399 evb:
+    Required root node properties:
+      - compatible = "rockchip,rk3399-evb", "rockchip,rk3399";

Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt

+NVIDIA Tegra186 GPIO controllers
+
+Tegra186 contains two GPIO controllers; a main controller and an "AON"
+controller. This binding document applies to both controllers. The register
+layouts for the controllers share many similarities, but also some significant
+differences. Hence, this document describes closely related but different
+bindings and compatible values.
+
+The Tegra186 GPIO controller allows software to set the IO direction of, and
+read/write the value of, numerous GPIO signals. Routing of GPIO signals to
+package balls is under the control of a separate pin controller HW block. Two
+major sets of registers exist:
+
+a) Security registers, which allow configuration of allowed access to the GPIO
+register set. These registers exist in a single contiguous block of physical
+address space. The size of this block, and the security features available,
+varies between the different GPIO controllers.
+
+Access to this set of registers is not necessary in all circumstances. Code
+that wishes to configure access to the GPIO registers needs access to these
+registers to do so. Code which simply wishes to read or write GPIO data does not
+need access to these registers.
+
+b) GPIO registers, which allow manipulation of the GPIO signals. In some GPIO
+controllers, these registers are exposed via multiple "physical aliases" in
+address space, each of which access the same underlying state. See the hardware
+documentation for rationale. Any particular GPIO client is expected to access
+just one of these physical aliases.
+
+Tegra HW documentation describes a unified naming convention for all GPIOs
+implemented by the SoC. Each GPIO is assigned to a port, and a port may control
+a number of GPIOs. Thus, each GPIO is named according to an alphabetical port
+name and an integer GPIO name within the port. For example, GPIO_PA0, GPIO_PN6,
+or GPIO_PCC3.
+
+The number of ports implemented by each GPIO controller varies. The number of
+implemented GPIOs within each port varies. GPIO registers within a controller
+are grouped and laid out according to the port they affect.
+
+The mapping from port name to the GPIO controller that implements that port, and
+the mapping from port name to register offset within a controller, are both
+extremely non-linear. The header file <dt-bindings/gpio/tegra186-gpio.h>
+describes the port-level mapping. In that file, the naming convention for ports
+matches the HW documentation. The values chosen for the names are alphabetically
+sorted within a particular controller. Drivers need to map between the DT GPIO
+IDs and HW register offsets using a lookup table.
+
+Each GPIO controller can generate a number of interrupt signals. Each signal
+represents the aggregate status for all GPIOs within a set of ports. Thus, the
+number of interrupt signals generated by a controller varies as a rough function
+of the number of ports it implements. Note that the HW documentation refers to
+both the overall controller HW module and the sets-of-ports as "controllers".
+
+Each GPIO controller in fact generates multiple interrupts signals for each set
+of ports. Each GPIO may be configured to feed into a specific one of the
+interrupt signals generated by a set-of-ports. The intent is for each generated
+signal to be routed to a different CPU, thus allowing different CPUs to each
+handle subsets of the interrupts within a port. The status of each of these
+per-port-set signals is reported via a separate register. Thus, a driver needs
+to know which status register to observe. This binding currently defines no
+configuration mechanism for this. By default, drivers should use register
+GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
+define a property to configure this.
+
+Required properties:
+- compatible
+    Array of strings.
+    One of:
+    - "nvidia,tegra186-gpio".
+    - "nvidia,tegra186-gpio-aon".
+- reg-names
+    Array of strings.
+    Contains a list of names for the register spaces described by the reg
+    property. May contain the following entries, in any order:
+    - "gpio": Mandatory. GPIO control registers. This may cover either:
+        a) The single physical alias that this OS should use.
+        b) All physical aliases that exist in the controller. This is
+           appropriate when the OS is responsible for managing assignment of
+           the physical aliases.
+    - "security": Optional. Security configuration registers.
+    Users of this binding MUST look up entries in the reg property by name,
+    using this reg-names property to do so.
+- reg
+    Array of (physical base address, length) tuples.
+    Must contain one entry per entry in the reg-names property, in a matching
+    order.
+- interrupts
+    Array of interrupt specifiers.
+    The interrupt outputs from the HW block, one per set of ports, in the
+    order the HW manual describes them. The number of entries required varies
+    depending on compatible value:
+    - "nvidia,tegra186-gpio": 6 entries.
+    - "nvidia,tegra186-gpio-aon": 1 entry.
+- gpio-controller
+    Boolean.
+    Marks the device node as a GPIO controller/provider.
+- #gpio-cells
+    Single-cell integer.
+    Must be <2>.
+    Indicates how many cells are used in a consumer's GPIO specifier.
+    In the specifier:
+    - The first cell is the pin number.
+        See <dt-bindings/gpio/tegra186-gpio.h>.
+    - The second cell contains flags:
+        - Bit 0 specifies polarity
+            - 0: Active-high (normal).
+            - 1: Active-low (inverted).
+- interrupt-controller
+    Boolean.
+    Marks the device node as an interrupt controller/provider.
+- #interrupt-cells
+    Single-cell integer.
+    Must be <2>.
+    Indicates how many cells are used in a consumer's interrupt specifier.
+    In the specifier:
+    - The first cell is the GPIO number.
+        See <dt-bindings/gpio/tegra186-gpio.h>.
+    - The second cell is contains flags:
+        - Bits [3:0] indicate trigger type and level:
+            - 1: Low-to-high edge triggered.
+            - 2: High-to-low edge triggered.
+            - 4: Active high level-sensitive.
+            - 8: Active low level-sensitive.
+            Valid combinations are 1, 2, 3, 4, 8.
+
+Example:
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+gpio@2200000 {
+	compatible = "nvidia,tegra186-gpio";
+	reg-names = "security", "gpio";
+	reg =
+		<0x0 0x2200000 0x0 0x10000>,
+		<0x0 0x2210000 0x0 0x10000>;
+	interrupts =
+		<0 47 IRQ_TYPE_LEVEL_HIGH>,
+		<0 50 IRQ_TYPE_LEVEL_HIGH>,
+		<0 53 IRQ_TYPE_LEVEL_HIGH>,
+		<0 56 IRQ_TYPE_LEVEL_HIGH>,
+		<0 59 IRQ_TYPE_LEVEL_HIGH>,
+		<0 180 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
+
+gpio@c2f0000 {
+	compatible = "nvidia,tegra186-gpio-aon";
+	reg-names = "security", "gpio";
+	reg =
+		<0x0 0xc2f0000 0x0 0x1000>,
+		<0x0 0xc2f1000 0x0 0x1000>;
+	interrupts =
+		<0 60 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};

Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt

-NVIDIA GK20A Graphics Processing Unit
+NVIDIA Tegra Graphics Processing Units
 
 Required properties:
-- compatible: "nvidia,<chip>-<gpu>"
+- compatible: "nvidia,<gpu>"
   Currently recognized values:
-  - nvidia,tegra124-gk20a
+  - nvidia,gk20a
+  - nvidia,gm20b
 - reg: Physical base address and length of the controller's registers.
   Must contain two entries:
   - first entry for bar0
@@ -19,14 +20,20 @@ Required properties:
 - clock-names: Must include the following entries:
   - gpu
   - pwr
+If the compatible string is "nvidia,gm20b", then the following clock
+is also required:
+  - ref
 - resets: Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names: Must include the following entries:
   - gpu
 
-Example:
+Optional properties:
+- iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details.
 
-	gpu@0,57000000 {
+Example for GK20A:
+
+	gpu@57000000 {
 		compatible = "nvidia,gk20a";
 		reg = <0x0 0x57000000 0x0 0x01000000>,
 		      <0x0 0x58000000 0x0 0x01000000>;
@@ -39,5 +46,25 @@ Example:
 		clock-names = "gpu", "pwr";
 		resets = <&tegra_car 184>;
 		reset-names = "gpu";
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+		status = "disabled";
+	};
+
+Example for GM20B:
+
+	gpu@57000000 {
+		compatible = "nvidia,gm20b";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA210_CLK_GPU>,
+			 <&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
+			 <&tegra_car TEGRA210_CLK_PLL_G_REF>;
+		clock-names = "gpu", "pwr", "ref";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
 		status = "disabled";
 	};

Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt

@@ -30,11 +30,90 @@ Required properties:
                         region may not be present in some scenarios, such
                         as in the device tree presented to a virtual machine.
 
+    - msi-parent
+        Value type: <phandle>
+        Definition: Must be present and point to the MSI controller node
+                    handling message interrupts for the MC.
+
+    - ranges
+        Value type: <prop-encoded-array>
+        Definition: A standard property.  Defines the mapping between the child
+                    MC address space and the parent system address space.
+
+                    The MC address space is defined by 3 components:
+                       <region type> <offset hi> <offset lo>
+
+                    Valid values for region type are
+                       0x0 - MC portals
+                       0x1 - QBMAN portals
+
+    - #address-cells
+        Value type: <u32>
+        Definition: Must be 3.  (see definition in 'ranges' property)
+
+    - #size-cells
+        Value type: <u32>
+        Definition: Must be 1.
+
+Sub-nodes:
+
+        The fsl-mc node may optionally have dpmac sub-nodes that describe
+        the relationship between the Ethernet MACs which belong to the MC
+        and the Ethernet PHYs on the system board.
+
+        The dpmac nodes must be under a node named "dpmacs" which contains
+        the following properties:
+
+            - #address-cells
+              Value type: <u32>
+              Definition: Must be present if dpmac sub-nodes are defined and must
+                          have a value of 1.
+
+            - #size-cells
+              Value type: <u32>
+              Definition: Must be present if dpmac sub-nodes are defined and must
+                          have a value of 0.
+
+        These nodes must have the following properties:
+
+            - compatible
+              Value type: <string>
+              Definition: Must be "fsl,qoriq-mc-dpmac".
+
+            - reg
+              Value type: <prop-encoded-array>
+              Definition: Specifies the id of the dpmac.
+
+            - phy-handle
+              Value type: <phandle>
+              Definition: Specifies the phandle to the PHY device node associated
+                          with the this dpmac.
+
 Example:
 
         fsl_mc: fsl-mc@80c000000 {
                 compatible = "fsl,qoriq-mc";
                 reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
                       <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-        };
+                msi-parent = <&its>;
+                #address-cells = <3>;
+                #size-cells = <1>;
+
+                /*
+                 * Region type 0x0 - MC portals
+                 * Region type 0x1 - QBMAN portals
+                 */
+                ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+                          0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
 
+                dpmacs {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    dpmac@1 {
+                        compatible = "fsl,qoriq-mc-dpmac";
+                        reg = <1>;
+                        phy-handle = <&mdio0_phy0>;
+                    }
+                }
+        };

Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt

@@ -15,6 +15,7 @@ Required Properties:
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
 	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
 	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
+	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
 
 Optional Properties:
 * clocks: from common clock binding: if ciu_drive and ciu_sample are

Documentation/devicetree/bindings/mtd/fsl-quadspi.txt

@@ -5,7 +5,8 @@ Required properties:
 		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
 		 "fsl,ls1021a-qspi"
 		 or
-		 "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi"
+		 "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi",
+		 "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi"
   - reg : the first contains the register location and length,
           the second contains the memory mapping address and length
   - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"

Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt

 ARM Freescale DSPI controller
 
 Required properties:
-- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi"
+- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi",
+		"fsl,ls2085a-dspi"
+		or
+		"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.

Documentation/devicetree/bindings/usb/usb-xhci.txt

@@ -4,6 +4,7 @@ Required properties:
   - compatible: should be one or more of
 
     - "generic-xhci" for generic XHCI device
+    - "marvell,armada3700-xhci" for Armada 37xx SoCs
     - "marvell,armada-375-xhci" for Armada 375 SoCs
     - "marvell,armada-380-xhci" for Armada 38x SoCs
     - "renesas,xhci-r8a7790" for r8a7790 SoC

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -93,6 +93,7 @@ firefly	Firefly
 focaltech	FocalTech Systems Co.,Ltd
 fsl	Freescale Semiconductor
 ge	General Electric Company
+geekbuying	GeekBuying
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 geniatech	Geniatech, Inc.

arch/arm64/boot/dts/Makefile

@@ -18,6 +18,7 @@ dts-dirs += rockchip
 dts-dirs += socionext
 dts-dirs += sprd
 dts-dirs += xilinx
+dts-dirs += lg
 
 subdir-y	:= $(dts-dirs)
 

arch/arm64/boot/dts/amlogic/Makefile

+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
+	model = "Hardkernel ODROID-C2";
+	
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts

+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "amlogic,p200", "amlogic,meson-gxbb";
+	model = "Amlogic Meson GXBB P200 Development Board";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts

+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "amlogic,p201", "amlogic,meson-gxbb";
+	model = "Amlogic Meson GXBB P201 Development Board";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "meson-gxbb.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts

@@ -48,7 +48,7 @@ / {
 	compatible = "tronsmart,vega-s95-meta", "tronsmart,vega-s95", "amlogic,meson-gxbb";
 	model = "Tronsmart Vega S95 Meta";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts

@@ -48,7 +48,7 @@ / {
 	compatible = "tronsmart,vega-s95-pro", "tronsmart,vega-s95", "amlogic,meson-gxbb";
 	model = "Tronsmart Vega S95 Pro";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts

@@ -48,7 +48,7 @@ / {
 	compatible = "tronsmart,vega-s95-telos", "tronsmart,vega-s95", "amlogic,meson-gxbb";
 	model = "Tronsmart Vega S95 Telos";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

@@ -45,6 +45,10 @@
 / {
 	compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
 
+	aliases {
+		serial0 = &uart_AO;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -50,11 +50,6 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	aliases {
-		serial0 = &uart_AO;
-		serial1 = &uart_A;
-	};
-
 	cpus {
 		#address-cells = <0x2>;
 		#size-cells = <0x0>;

arch/arm64/boot/dts/apm/apm-shadowcat.dtsi

@@ -543,7 +543,7 @@ pcie1: pcie@1f2c0000 {
 		};
 
 		sata1: sata@1a000000 {
-			compatible = "apm,xgene-ahci";
+			compatible = "apm,xgene-ahci-v2";
 			reg = <0x0 0x1a000000 0x0 0x1000>,
 			      <0x0 0x1f200000 0x0 0x1000>,
 			      <0x0 0x1f20d000 0x0 0x1000>,
@@ -553,7 +553,7 @@ sata1: sata@1a000000 {
 		};
 
 		sata2: sata@1a200000 {
-			compatible = "apm,xgene-ahci";
+			compatible = "apm,xgene-ahci-v2";
 			reg = <0x0 0x1a200000 0x0 0x1000>,
 			      <0x0 0x1f210000 0x0 0x1000>,
 			      <0x0 0x1f21d000 0x0 0x1000>,
@@ -563,7 +563,7 @@ sata2: sata@1a200000 {
 		};
 
 		sata3: sata@1a400000 {
-			compatible = "apm,xgene-ahci";
+			compatible = "apm,xgene-ahci-v2";
 			reg = <0x0 0x1a400000 0x0 0x1000>,
 			      <0x0 0x1f220000 0x0 0x1000>,
 			      <0x0 0x1f22d000 0x0 0x1000>,

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -272,3 +272,13 @@ smb@08000000 {
 
 		/include/ "juno-motherboard.dtsi"
 	};
+
+	site2: tlx@60000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x60000000 0x10000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0>;
+		interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>;
+	};

arch/arm64/boot/dts/broadcom/ns2-clock.dtsi

+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-ns2.h>
+
+	osc: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	lcpll_ddr: lcpll_ddr@6501d058 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-lcpll-ddr";
+		reg = <0x6501d058 0x20>,
+		      <0x6501c020 0x4>,
+		      <0x6501d04c 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+				     "ddr", "ddr_ch2_unused",
+				     "ddr_ch3_unused", "ddr_ch4_unused",
+				     "ddr_ch5_unused";
+	};
+
+	lcpll_ports: lcpll_ports@6501d078 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-lcpll-ports";
+		reg = <0x6501d078 0x20>,
+		      <0x6501c020 0x4>,
+		      <0x6501d054 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll_ports", "wan", "rgmii",
+				     "ports_ch2_unused",
+				     "ports_ch3_unused",
+				     "ports_ch4_unused",
+				     "ports_ch5_unused";
+	};
+
+	genpll_scr: genpll_scr@6501d098 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-genpll-scr";
+		reg = <0x6501d098 0x32>,
+		      <0x6501c020 0x4>,
+		      <0x6501d044 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll_scr", "scr", "fs",
+				     "audio_ref", "scr_ch3_unused",
+				     "scr_ch4_unused", "scr_ch5_unused";
+	};
+
+	iprocmed: iprocmed {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	iprocslow: iprocslow {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
+	genpll_sw: genpll_sw@6501d0c4 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-genpll-sw";
+		reg = <0x6501d0c4 0x32>,
+		      <0x6501c020 0x4>,
+		      <0x6501d044 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll_sw", "rpe", "250", "nic",
+				     "chimp", "port", "sdio";
+	};

arch/arm64/boot/dts/broadcom/ns2-svk.dts

@@ -72,6 +72,51 @@ &uart3 {
 	status = "ok";
 };
 
+&ssp0 {
+	status = "ok";
+
+	slic@0 {
+		compatible = "silabs,si3226x";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha = <1>;
+		spi-cpol = <1>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,slave-tx-disable = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+	};
+};
+
+&ssp1 {
+	status = "ok";
+
+	at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		at25,byte-len = <0x8000>;
+		at25,addr-mode = <2>;
+		at25,page-size = <64>;
+		spi-cpha = <1>;
+		spi-cpol = <1>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,slave-tx-disable = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+	};
+};
+
 &sdio0 {
 	status = "ok";
 };

arch/arm64/boot/dts/broadcom/ns2.dtsi

 /*
  *  BSD LICENSE
  *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *  Copyright (c) 2015 Broadcom.  All rights reserved.
  *
  *  Redistribution and use in source and binary forms, with or without
  *  modification, are permitted provided that the following conditions
@@ -33,8 +33,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/bcm-ns2.h>
 
-/memreserve/ 0x84b00000 0x00000008;
-
 / {
 	compatible = "brcm,ns2";
 	interrupt-parent = <&gic>;
@@ -49,8 +47,7 @@ A57_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -58,8 +55,7 @@ A57_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -67,8 +63,7 @@ A57_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -76,8 +71,7 @@ A57_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -86,6 +80,11 @@ CLUSTER0_L2: l2-cache@000 {
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
@@ -110,33 +109,6 @@ pmu {
 				     <&A57_3>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		iprocmed: iprocmed {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		iprocslow: iprocslow {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-	};
-
 	pcie0: pcie@20020000 {
 		compatible = "brcm,iproc-pcie";
 		reg = <0 0x20020000 0 0x1000>;
@@ -217,6 +189,27 @@ soc: soc {
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		#include "ns2-clock.dtsi"
+
+		dma0: dma@61360000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x61360000 0x1000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
 		smmu: mmu@64000000 {
 			compatible = "arm,mmu-500";
 			reg = <0x64000000 0x40000>;
@@ -258,68 +251,6 @@ smmu: mmu@64000000 {
 			mmu-masters;
 		};
 
-		lcpll_ddr: lcpll_ddr@6501d058 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-lcpll-ddr";
-			reg = <0x6501d058 0x20>,
-			      <0x6501c020 0x4>,
-			      <0x6501d04c 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "lcpll_ddr", "pcie_sata_usb",
-					     "ddr", "ddr_ch2_unused",
-					     "ddr_ch3_unused", "ddr_ch4_unused",
-					     "ddr_ch5_unused";
-		};
-
-		lcpll_ports: lcpll_ports@6501d078 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-lcpll-ports";
-			reg = <0x6501d078 0x20>,
-			      <0x6501c020 0x4>,
-			      <0x6501d054 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "lcpll_ports", "wan", "rgmii",
-					     "ports_ch2_unused",
-					     "ports_ch3_unused",
-					     "ports_ch4_unused",
-					     "ports_ch5_unused";
-		};
-
-		genpll_scr: genpll_scr@6501d098 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-genpll-scr";
-			reg = <0x6501d098 0x32>,
-			      <0x6501c020 0x4>,
-			      <0x6501d044 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "genpll_scr", "scr", "fs",
-					     "audio_ref", "scr_ch3_unused",
-					     "scr_ch4_unused", "scr_ch5_unused";
-		};
-
-		genpll_sw: genpll_sw@6501d0c4 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-genpll-sw";
-			reg = <0x6501d0c4 0x32>,
-			      <0x6501c020 0x4>,
-			      <0x6501d044 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "genpll_sw", "rpe", "250", "nic",
-					     "chimp", "port", "sdio";
-		};
-
-		crmu: crmu@65024000 {
-			compatible = "syscon";
-			reg = <0x65024000 0x100>;
-		};
-
-		reboot@65024000 {
-			compatible ="syscon-reboot";
-			regmap = <&crmu>;
-			offset = <0x90>;
-			mask = <0xfffffffd>;
-		};
-
 		gic: interrupt-controller@65210000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -328,6 +259,8 @@ gic: interrupt-controller@65210000 {
 			      <0x65220000 0x1000>,
 			      <0x65240000 0x2000>,
 			      <0x65260000 0x1000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		timer0: timer@66030000 {
@@ -408,6 +341,28 @@ uart3: serial@66130000 {
 			status = "disabled";
 		};
 
+		ssp0: ssp@66180000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x66180000 0x1000>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "spiclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssp1: ssp@66190000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x66190000 0x1000>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "spiclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		hwrng: hwrng@66220000 {
 			compatible = "brcm,iproc-rng200";
 			reg = <0x66220000 0x28>;

arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi

+/*
+ * Device tree sources for Exynos7 TMU sensor configuration
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <9>;
+samsung,tmu_reference_voltage = <17>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <75>;
+samsung,tmu_min_efuse_value = <15>;
+samsung,tmu_max_efuse_value = <100>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;

arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi

+/*
+ * Device tree sources for default Exynos7 thermal zone definition
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+trips {
+	cpu-alert-0 {
+		temperature = <75000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-1 {
+		temperature = <80000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-2 {
+		temperature = <85000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-3 {
+		temperature = <90000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-4 {
+		temperature = <95000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-5 {
+		temperature = <100000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-6 {
+		temperature = <110000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-crit-0 {
+		temperature = <115000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "critical";
+	};
+};

arch/arm64/boot/dts/exynos/exynos7.dtsi

@@ -27,6 +27,7 @@ aliases {
 		pinctrl6 = &pinctrl_fsys0;
 		pinctrl7 = &pinctrl_fsys1;
 		pinctrl8 = &pinctrl_bus1;
+		tmuctrl0 = &tmuctrl_0;
 	};
 
 	cpus {
@@ -95,6 +96,35 @@ gic: interrupt-controller@11001000 {
 				<0x11006000 0x2000>;
 		};
 
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma0: pdma@10E10000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x10E10000 0x1000>;
+				interrupts = <0 225 0>;
+				clocks = <&clock_fsys0 ACLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@10EB0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x10EB0000 0x1000>;
+				interrupts = <0 226 0>;
+				clocks = <&clock_fsys0 ACLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
 		clock_topc: clock-controller@10570000 {
 			compatible = "samsung,exynos7-clock-topc";
 			reg = <0x10570000 0x10000>;
@@ -538,6 +568,25 @@ pwm: pwm@136c0000 {
 			clocks = <&clock_peric0 PCLK_PWM>;
 			clock-names = "timers";
 		};
+
+		tmuctrl_0: tmu@10060000 {
+			compatible = "samsung,exynos7-tmu";
+			reg = <0x10060000 0x200>;
+			interrupts = <0 108 0>;
+			clocks = <&clock_peris PCLK_TMU>,
+				 <&clock_peris SCLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos7-tmu-sensor-conf.dtsi"
+		};
+
+		thermal-zones {
+			atlas_thermal: cluster0-thermal {
+				polling-delay-passive = <0>; /* milliseconds */
+				polling-delay = <0>; /* milliseconds */
+				thermal-sensors = <&tmuctrl_0>;
+				#include "exynos7-trip-points.dtsi"
+			};
+		};
 	};
 };
 

arch/arm64/boot/dts/freescale/Makefile

+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
-dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
  
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts

+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A QDS Board";
+	compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+		serial4 = &lpuart4;
+		serial5 = &lpuart5;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fl128s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};

arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts

@@ -107,6 +107,19 @@ cpld: board-control@2,0 {
 		};
 };
 
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+	};
+};
+
 &duart0 {
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -171,6 +171,20 @@ ifc: ifc@1530000 {
 			interrupts = <0 43 0x4>;
 		};
 
+		qspi: quadspi@1550000 {
+			compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x4000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <0 99 0x4>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+			big-endian;
+			status = "disabled";
+		};
+
 		esdhc: esdhc@1560000 {
 			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
@@ -284,7 +298,7 @@ duart3: serial@21d0600 {
 		};
 
 		gpio1: gpio@2300000 {
-			compatible = "fsl,ls1043a-gpio";
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <0 66 0x4>;
 			gpio-controller;
@@ -294,7 +308,7 @@ gpio1: gpio@2300000 {
 		};
 
 		gpio2: gpio@2310000 {
-			compatible = "fsl,ls1043a-gpio";
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <0 67 0x4>;
 			gpio-controller;
@@ -304,7 +318,7 @@ gpio2: gpio@2310000 {
 		};
 
 		gpio3: gpio@2320000 {
-			compatible = "fsl,ls1043a-gpio";
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <0 68 0x4>;
 			gpio-controller;
@@ -314,7 +328,7 @@ gpio3: gpio@2320000 {
 		};
 
 		gpio4: gpio@2330000 {
-			compatible = "fsl,ls1043a-gpio";
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <0 134 0x4>;
 			gpio-controller;

arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts

@@ -178,7 +178,14 @@ dflash2: en25s64 {
 
 &qspi {
 	status = "okay";
-	qflash0: s25fl008k {
+	flash0: s25fl256s1@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+	flash2: s25fl256s1@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p80";

arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi

@@ -265,6 +265,104 @@ fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
 			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+			msi-parent = <&its>;
+			#address-cells = <3>;
+			#size-cells = <1>;
+
+			/*
+			 * Region type 0x0 - MC portals
+			 * Region type 0x1 - QBMAN portals
+			 */
+			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+			/*
+			 * Define the maximum number of MACs present on the SoC.
+			 */
+			dpmacs {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpmac1: dpmac@1 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x1>;
+				};
+
+				dpmac2: dpmac@2 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x2>;
+				};
+
+				dpmac3: dpmac@3 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x3>;
+				};
+
+				dpmac4: dpmac@4 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x4>;
+				};
+
+				dpmac5: dpmac@5 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x5>;
+				};
+
+				dpmac6: dpmac@6 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x6>;
+				};
+
+				dpmac7: dpmac@7 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x7>;
+				};
+
+				dpmac8: dpmac@8 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x8>;
+				};
+
+				dpmac9: dpmac@9 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x9>;
+				};
+
+				dpmac10: dpmac@a {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xa>;
+				};
+
+				dpmac11: dpmac@b {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xb>;
+				};
+
+				dpmac12: dpmac@c {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xc>;
+				};
+
+				dpmac13: dpmac@d {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xd>;
+				};
+
+				dpmac14: dpmac@e {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xe>;
+				};
+
+				dpmac15: dpmac@f {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xf>;
+				};
+
+				dpmac16: dpmac@10 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x10>;
+				};
+			};
 		};
 
 		smmu: iommu@5000000 {
@@ -318,7 +416,7 @@ smmu: iommu@5000000 {
 
 		dspi: dspi@2100000 {
 			status = "disabled";
-			compatible = "fsl,vf610-dspi";
+			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
@@ -342,7 +440,7 @@ esdhc: esdhc@2140000 {
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <0 36 0x4>; /* Level high type */
 			gpio-controller;
@@ -353,7 +451,7 @@ gpio0: gpio@2300000 {
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <0 36 0x4>; /* Level high type */
 			gpio-controller;
@@ -364,7 +462,7 @@ gpio1: gpio@2310000 {
 		};
 
 		gpio2: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <0 37 0x4>; /* Level high type */
 			gpio-controller;
@@ -375,7 +473,7 @@ gpio2: gpio@2320000 {
 		};
 
 		gpio3: gpio@2330000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <0 37 0x4>; /* Level high type */
 			gpio-controller;
@@ -444,7 +542,7 @@ ifc: ifc@2240000 {
 
 		qspi: quadspi@20c0000 {
 			status = "disabled";
-			compatible = "fsl,vf610-qspi";
+			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x20c0000 0x0 0x10000>,

arch/arm64/boot/dts/hisilicon/Makefile

-dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts

@@ -6,11 +6,9 @@
  */
 
 /dts-v1/;
-
-/*Reserved 1MB memory for MCU*/
-/memreserve/ 0x05e00000 0x00100000;
-
 #include "hi6220.dtsi"
+#include "hikey-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "HiKey Development Board";
@@ -27,9 +25,201 @@ chosen {
 		stdout-path = "serial3:115200n8";
 	};
 
+	/*
+	 * Reserve below regions from memory node:
+	 *
+	 *  0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
+	 *  0x06df,f000 - 0x06df,ffff: Mailbox message data
+	 *  0x0740,f000 - 0x0740,ffff: MCU firmware section
+	 *  0x3e00,0000 - 0x3fff,ffff: OP-TEE
+	 */
 	memory@0 {
 		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
+		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
+		      <0x00000000 0x05f00000 0x00000000 0x00eff000>,
+		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
+		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
+	};
+
+	soc {
+		spi0: spi@f7106000 {
+			status = "ok";
+		};
+
+		i2c0: i2c@f7100000 {
+			status = "ok";
+		};
+
+		i2c1: i2c@f7101000 {
+			status = "ok";
+		};
+
+		uart1: uart@f7111000 {
+			status = "ok";
+		};
+
+		uart2: uart@f7112000 {
+			status = "ok";
+		};
+
+		uart3: uart@f7113000 {
+			status = "ok";
+		};
+
+		dwmmc_2: dwmmc2@f723f000 {
+			ti,non-removable;
+			non-removable;
+			/* WL_EN */
+			vmmc-supply = <&wlan_en_reg>;
+
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			wlcore: wlcore@2 {
+				compatible = "ti,wl1835";
+				reg = <2>;	/* sdio func num */
+				/* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */
+				interrupt-parent = <&gpio1>;
+				interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		wlan_en_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "wlan-en-regulator";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			/* WLAN_EN GPIO */
+			gpio = <&gpio0 5 0>;
+			/* WLAN card specific delay */
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		user_led4 {
+			label = "user_led4";
+			gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led3 {
+			label = "user_led3";
+			gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led2 {
+			label = "user_led2";
+			gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led1 {
+			label = "user_led1";
+			gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */
+			linux,default-trigger = "cpu0";
+		};
+
+		wlan_active_led {
+			label = "wifi_active";
+			gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led {
+			label = "bt_active";
+			gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */
+			linux,default-trigger = "hci0rx";
+			default-state = "off";
+		};
+	};
+
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			ldo2: LDO2 {
+				regulator-name = "LDO2_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "LDO7_SDIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo10: LDO10 {
+				regulator-name = "LDO10_2V85";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+
+			ldo13: LDO13 {
+				regulator-name = "LDO13_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo14: LDO14 {
+				regulator-name = "LDO14_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo15: LDO15 {
+				regulator-name = "LDO15_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo17: LDO17 {
+				regulator-name = "LDO17_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo19: LDO19 {
+				regulator-name = "LDO19_3V0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+
+			ldo21: LDO21 {
+				regulator-name = "LDO21_1V8";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo22: LDO22 {
+				regulator-name = "LDO22_1V2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+		};
 	};
 };
 

arch/arm64/boot/dts/hisilicon/hip05-d02.dts

@@ -52,3 +52,37 @@ &uart0 {
 &peri_gpio0 {
 	status = "ok";
 };
+
+&lbc {
+	status = "ok";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x0 0x90000000 0x08000000>,
+		 <1 0 0x0 0x98000000 0x08000000>;
+
+	nor-flash@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "numonyx,js28f00a", "cfi-flash";
+		reg = <0 0x0 0x08000000>;
+		bank-width = <2>;
+		/* The three parts may not used */
+		partition@0 {
+			label = "BIOS";
+			reg = <0x0 0x300000>;
+		};
+		partition@300000 {
+			label = "Linux";
+			reg = <0x300000 0xa00000>;
+		};
+		partition@1000000 {
+			label = "Rootfs";
+			reg = <0x01000000 0x02000000>;
+		};
+	};
+
+	cpld@1,0 {
+		compatible = "hisilicon,hip05-cpld";
+		reg = <1 0x0 0x100>;
+	};
+};

arch/arm64/boot/dts/hisilicon/hip05.dtsi

@@ -249,24 +249,28 @@ gic: interrupt-controller@8d000000 {
 		its_peri: interrupt-controller@8c000000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x8c000000 0x0 0x40000>;
 		};
 
 		its_m3: interrupt-controller@a3000000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0xa3000000 0x0 0x40000>;
 		};
 
 		its_pcie: interrupt-controller@b7000000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0xb7000000 0x0 0x40000>;
 		};
 
 		its_dsa: interrupt-controller@c6000000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0xc6000000 0x0 0x40000>;
 		};
 	};
@@ -323,6 +327,12 @@ uart1: uart@80310000 {
 			status = "disabled";
 		};
 
+		lbc: localbus@80380000 {
+			compatible = "hisilicon,hisi-localbus", "simple-bus";
+			reg = <0x0 0x80380000 0x0 0x10000>;
+			status = "disabled";
+		};
+
 		peri_gpio0: gpio@802e0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm64/boot/dts/hisilicon/hip06-d03.dts

+/**
+ * dts file for Hisilicon D03 Development Board
+ *
+ * Copyright (C) 2016 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include "hip06.dtsi"
+
+/ {
+	model = "Hisilicon Hip06 D03 Development Board";
+	compatible = "hisilicon,hip06-d03";
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;
+	};
+
+	chosen { };
+};
+
+&usb_ohci {
+	status = "ok";
+};
+
+&usb_ehci {
+	status = "ok";
+};

arch/arm64/boot/dts/hisilicon/hip06.dtsi

+/**
+ * dts file for Hisilicon D03 Development Board
+ *
+ * Copyright (C) 2016 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hip06-d03";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+				core2 {
+					cpu = <&cpu10>;
+				};
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&cpu12>;
+				};
+				core1 {
+					cpu = <&cpu13>;
+				};
+				core2 {
+					cpu = <&cpu14>;
+				};
+				core3 {
+					cpu = <&cpu15>;
+				};
+			};
+		};
+
+		cpu0: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu1: cpu@10001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu2: cpu@10002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu3: cpu@10003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu4: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu5: cpu@10101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu6: cpu@10102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu7: cpu@10103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu8: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu9: cpu@10201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu10: cpu@10202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu11: cpu@10203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu12: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu13: cpu@10301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu14: cpu@10302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu15: cpu@10303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller@4d000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		redistributor-stride = <0x0 0x30000>;
+		reg = <0x0 0x4d000000 0 0x10000>,	/* GICD */
+		      <0x0 0x4d100000 0 0x300000>,	/* GICR */
+		      <0x0 0xfe000000 0 0x10000>,	/* GICC */
+		      <0x0 0xfe010000 0 0x10000>,       /* GICH */
+		      <0x0 0xfe020000 0 0x10000>;       /* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its_dsa: interrupt-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	mbigen_pcie@a0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xa0080000 0x0 0x10000>;
+
+		mbigen_usb: intc_usb {
+			msi-parent = <&its_dsa 0x40080>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <2>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb_ohci: ohci@a7030000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0xa7030000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <64 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb_ehci: ehci@a7020000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0xa7020000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <65 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+	};
+
+};

arch/arm64/boot/dts/lg/Makefile

+dtb-$(CONFIG_ARCH_LG1K) += lg1312-ref.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb

arch/arm64/boot/dts/lg/lg1312-ref.dts

+/*
+ * dts file for lg1312 Reference Board.
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+/dts-v1/;
+
+#include "lg1312.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	model = "LG Electronics, DTV SoC LG1312 Reference Board";
+	compatible = "lge,lg1312-ref", "lge,lg1312";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};

arch/arm64/boot/dts/lg/lg1312.dtsi

+/*
+ * dts file for lg1312 SoC
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "lge,lg1312";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	gic: interrupt-controller@c0001000 {
+		#interrupt-cells = <3>;
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		reg = <0x0 0xc0001000 0x1000>,
+		      <0x0 0xc0002000 0x2000>,
+		      <0x0 0xc0004000 0x2000>,
+		      <0x0 0xc0006000 0x2000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_bus: clk_bus {
+		#clock-cells = <0>;
+
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "BUSCLK";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		eth0: ethernet@c1b00000 {
+			compatible = "cdns,gem";
+			reg = <0x0 0xc1b00000 0x1000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "hclk", "pclk";
+			phy-mode = "rmii";
+			/* Filled in by boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+
+	amba {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		#interrupts-cells = <3>;
+
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timers: timer@fd100000 {
+			compatible = "arm,sp804";
+			reg = <0x0 0xfd100000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		wdog: watchdog@fd200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xfd200000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		uart0: serial@fe000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe000000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		uart1: serial@fe100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe100000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		uart2: serial@fe200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe200000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		spi0: ssp@fe800000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe800000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		spi1: ssp@fe900000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe900000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		dmac0: dma@c1128000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xc1128000 0x1000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio0: gpio@fd400000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd400000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio1: gpio@fd410000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd410000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio2: gpio@fd420000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd420000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio3: gpio@fd430000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd430000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio4: gpio@fd440000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd440000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio5: gpio@fd450000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd450000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio6: gpio@fd460000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd460000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio7: gpio@fd470000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd470000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio8: gpio@fd480000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd480000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio9: gpio@fd490000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd490000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio10: gpio@fd4a0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4a0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio11: gpio@fd4b0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4b0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio12: gpio@fd4c0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4c0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio13: gpio@fd4d0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4d0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio14: gpio@fd4e0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4e0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio15: gpio@fd4f0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4f0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio16: gpio@fd500000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd500000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio17: gpio@fd510000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd510000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+	};
+};

arch/arm64/boot/dts/marvell/armada-3720-db.dts

@@ -60,27 +60,19 @@ memory {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
 	};
+};
 
-	soc {
-		internal-regs {
-			/*
-			* Exported on the micro USB connector CON32
-			* through an FTDI
-			*/
-			uart0: serial@12000 {
-				status = "okay";
-			};
-
-			/* CON31 */
-			usb3@58000 {
-				status = "okay";
-			};
+/* CON3 */
+&sata {
+	status = "okay";
+};
 
-			/* CON3 */
-			sata@e0000 {
-			       status = "okay";
-			};
-		};
-	};
+/* Exported on the micro USB connector CON32 through an FTDI */
+&uart0 {
+	status = "okay";
 };
 
+/* CON31 */
+&usb3 {
+	status = "okay";
+};

arch/arm64/boot/dts/marvell/armada-372x.dtsi

@@ -59,5 +59,4 @@ cpu@1 {
 			enable-method = "psci";
 		};
 	};
-
 };

arch/arm64/boot/dts/marvell/armada-37xx.dtsi

@@ -105,14 +105,28 @@ uart0: serial@12000 {
 				status = "disabled";
 			};
 
-			usb3@58000 {
-				compatible = "generic-xhci";
+			usb3: usb@58000 {
+				compatible = "marvell,armada3700-xhci",
+				"generic-xhci";
 				reg = <0x58000 0x4000>;
 				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
-			sata@e0000 {
+			xor@60900 {
+				compatible = "marvell,armada-3700-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+
+				xor10 {
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			sata: sata@e0000 {
 				compatible = "marvell,armada-3700-ahci";
 				reg = <0xe0000 0x2000>;
 				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/marvell/armada-7020.dtsi

@@ -46,6 +46,7 @@
  */
 
 #include "armada-ap806-dual.dtsi"
+#include "armada-cp110-master.dtsi"
 
 / {
 	model = "Marvell Armada 7020";

arch/arm64/boot/dts/marvell/armada-7040-db.dts

@@ -51,42 +51,98 @@ / {
 	compatible = "marvell,armada7040-db", "marvell,armada7040",
 		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory@00000000 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
 
-	ap806 {
-		config-space {
-			spi@510600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <10000000>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x200000>;
-					};
-					partition@400000 {
-						label = "Filesystem";
-						reg = <0x200000 0xce0000>;
-					};
-				};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
 			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
 
-			i2c@511000 {
-				status = "okay";
-				clock-frequency = <100000>;
+
+&cpm_pcie2 {
+	status = "okay";
+};
+
+&cpm_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cpm_spi1 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
 			};
 
-			serial@512000 {
-				status = "okay";
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
 			};
 		};
 	};
 };
+
+&cpm_sata0 {
+	status = "okay";
+};
+
+&cpm_usb3_0 {
+	status = "okay";
+};
+
+&cpm_usb3_1 {
+	status = "okay";
+};

arch/arm64/boot/dts/marvell/armada-7040.dtsi

@@ -46,6 +46,7 @@
  */
 
 #include "armada-ap806-quad.dtsi"
+#include "armada-cp110-master.dtsi"
 
 / {
 	model = "Marvell Armada 7040";

arch/arm64/boot/dts/marvell/armada-8020.dtsi

@@ -46,6 +46,7 @@
  */
 
 #include "armada-ap806-dual.dtsi"
+#include "armada-cp110-master.dtsi"
 
 / {
 	model = "Marvell Armada 8020";

arch/arm64/boot/dts/marvell/armada-8040.dtsi

@@ -46,6 +46,7 @@
  */
 
 #include "armada-ap806-quad.dtsi"
+#include "armada-cp110-master.dtsi"
 
 / {
 	model = "Marvell Armada 8040";

arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi

@@ -68,4 +68,3 @@ cpu@001 {
 		};
 	};
 };
-

arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi

@@ -79,6 +79,4 @@ cpu@101 {
 			enable-method = "psci";
 		};
 	};
-
 };
-

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -54,12 +54,16 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
 	};
 
-
 	ap806 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -136,7 +140,7 @@ odmi: odmi@300000 {
 				marvell,spi-base = <128>, <136>, <144>, <152>;
 			};
 
-			xor0@400000 {
+			xor@400000 {
 				compatible = "marvell,mv-xor-v2";
 				reg = <0x400000 0x1000>,
 				      <0x410000 0x1000>;
@@ -144,7 +148,7 @@ xor0@400000 {
 				dma-coherent;
 			};
 
-			xor1@420000 {
+			xor@420000 {
 				compatible = "marvell,mv-xor-v2";
 				reg = <0x420000 0x1000>,
 				      <0x430000 0x1000>;
@@ -152,7 +156,7 @@ xor1@420000 {
 				dma-coherent;
 			};
 
-			xor2@440000 {
+			xor@440000 {
 				compatible = "marvell,mv-xor-v2";
 				reg = <0x440000 0x1000>,
 				      <0x450000 0x1000>;
@@ -160,7 +164,7 @@ xor2@440000 {
 				dma-coherent;
 			};
 
-			xor3@460000 {
+			xor@460000 {
 				compatible = "marvell,mv-xor-v2";
 				reg = <0x460000 0x1000>,
 				      <0x470000 0x1000>;
@@ -175,63 +179,51 @@ spi0: spi@510600 {
 				#size-cells = <0>;
 				cell-index = <0>;
 				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ringclk 2>;
+				clocks = <&ap_syscon 3>;
 				status = "disabled";
 			};
 
 			i2c0: i2c@511000 {
-				compatible = "marvell,mv64xxx-i2c";
+				compatible = "marvell,mv78230-i2c";
 				reg = <0x511000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				timeout-ms = <1000>;
-				clocks = <&ringclk 2>;
+				clocks = <&ap_syscon 3>;
 				status = "disabled";
 			};
 
-			serial@512000 {
+			uart0: serial@512000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x512000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
-				clocks = <&ringclk 2>;
+				clocks = <&ap_syscon 3>;
 				status = "disabled";
 			};
 
-			serial@512100 {
+			uart1: serial@512100 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x512100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
-				clocks = <&ringclk 2>;
+				clocks = <&ap_syscon 3>;
 				status = "disabled";
 
 			};
 
-			dfx-server@6f8000 {
-				compatible = "simple-mfd", "syscon";
-				reg = <0x6f8000 0x70000>;
-
-				coreclk: clk@204 {
-					compatible = "marvell,armada-ap806-core-clock";
-					#clock-cells = <1>;
-					clock-output-names = "ddr", "ring", "cpu";
-				};
-
-				ringclk: clk@250 {
-					compatible = "marvell,armada-ap806-ring-clock";
-					#clock-cells = <1>;
-					clock-output-names = "ring-0", "ring-2",
-							     "ring-3", "ring-4",
-							     "ring-5";
-					clocks = <&coreclk 1>;
-				};
+			ap_syscon: system-controller@6f4000 {
+				compatible = "marvell,ap806-system-controller",
+					     "syscon";
+				#clock-cells = <1>;
+				clock-output-names = "ap-cpu-cluster-0",
+						     "ap-cpu-cluster-1",
+						     "ap-fixed", "ap-mss";
+				reg = <0x6f4000 0x1000>;
 			};
 		};
 	};
-
 };
-

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada CP110 Master.
+ */
+
+/ {
+	cp110-master {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 0x0 0xf2000000 0x2000000>;
+
+			cpm_syscon0: system-controller@440000 {
+				compatible = "marvell,cp110-system-controller0",
+					     "syscon";
+				reg = <0x440000 0x1000>;
+				#clock-cells = <2>;
+				core-clock-output-names =
+					"cpm-apll", "cpm-ppv2-core", "cpm-eip",
+					"cpm-core", "cpm-nand-core";
+				gate-clock-output-names =
+					"cpm-audio", "cpm-communit", "cpm-nand",
+					"cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
+					"cpm-mg-core", "cpm-xor1", "cpm-xor0",
+					"cpm-gop-dp", "none", "cpm-pcie_x10",
+					"cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
+					"cpm-sata", "cpm-sata-usb", "cpm-main",
+					"cpm-sd-mmc", "none", "none",
+					"cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
+					"cpm-usb3dev", "cpm-eip150", "cpm-eip197";
+			};
+
+			cpm_sata0: sata@540000 {
+				compatible = "marvell,armada-8k-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_syscon0 1 15>;
+				status = "disabled";
+			};
+
+			cpm_usb3_0: usb3@500000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x500000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_syscon0 1 22>;
+				status = "disabled";
+			};
+
+			cpm_usb3_1: usb3@510000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x510000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_syscon0 1 23>;
+				status = "disabled";
+			};
+
+			cpm_spi0: spi@700600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700600 0x50>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				cell-index = <1>;
+				clocks = <&cpm_syscon0 0 3>;
+				status = "disabled";
+			};
+
+			cpm_spi1: spi@700680 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <2>;
+				clocks = <&cpm_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cpm_i2c0: i2c@701000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cpm_i2c1: i2c@701100 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_syscon0 1 21>;
+				status = "disabled";
+			};
+		};
+
+		cpm_pcie0: pcie@f2600000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf2600000 0 0x10000>,
+			      <0 0xf6f00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xf9000000 0  0xf9000000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			num-lanes = <1>;
+			clocks = <&cpm_syscon0 1 13>;
+			status = "disabled";
+		};
+
+		cpm_pcie1: pcie@f2620000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf2620000 0 0x10000>,
+			      <0 0xf7f00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xf9010000 0  0xf9010000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xf7000000 0  0xf7000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&cpm_syscon0 1 11>;
+			status = "disabled";
+		};
+
+		cpm_pcie2: pcie@f2640000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf2640000 0 0x10000>,
+			      <0 0xf8f00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xf9020000 0  0xf9020000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xf8000000 0  0xf8000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&cpm_syscon0 1 12>;
+			status = "disabled";
+		};
+	};
+};

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -125,6 +125,49 @@ cpum_ck: oscillator@2 {
 		clock-output-names = "cpum_ck";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu_thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&thermal>;
+			sustainable-power = <1500>; /* milliwatts */
+
+			trips {
+				threshold: trip-point@0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point@1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit@0 {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map@0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 0>;
+					contribution = <1024>;
+				};
+				map@1 {
+					trip = <&target>;
+					cooling-device = <&cpu2 0 0>;
+					contribution = <2048>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
@@ -313,6 +356,11 @@ gic: interrupt-controller@10220000 {
 				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		auxadc: auxadc@11001000 {
+			compatible = "mediatek,mt8173-auxadc";
+			reg = <0 0x11001000 0 0x1000>;
+		};
+
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt8173-uart",
 				     "mediatek,mt6577-uart";
@@ -414,6 +462,18 @@ spi: spi@1100a000 {
 			status = "disabled";
 		};
 
+		thermal: thermal@1100b000 {
+			#thermal-sensor-cells = <0>;
+			compatible = "mediatek,mt8173-thermal";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+			clock-names = "therm", "auxadc";
+			resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
 		nor_flash: spi@1100d000 {
 			compatible = "mediatek,mt8173-nor";
 			reg = <0 0x1100d000 0 0xe0>;

arch/arm64/boot/dts/nvidia/Makefile

@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
 
 always		:= $(dtb-y)
 clean-files	:= *.dtb

arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi

@@ -5,7 +5,7 @@ / {
 	compatible = "nvidia,p2180", "nvidia,tegra210";
 
 	aliases {
-		rtc1 = "/rtc@0,7000e000";
+		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
@@ -15,16 +15,16 @@ memory {
 	};
 
 	/* debug port */
-	serial@0,70006000 {
+	serial@70006000 {
 		status = "okay";
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 	};
 
 	/* eMMC */
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;

arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi

@@ -5,31 +5,35 @@ / {
 	compatible = "nvidia,p2530", "nvidia,tegra210";
 
 	aliases {
-		rtc1 = "/rtc@0,7000e000";
+		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
 
 	/* debug port */
-	serial@0,70006000 {
+	serial@70006000 {
 		status = "okay";
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 	};
 
 	/* eMMC */
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;

arch/arm64/boot/dts/nvidia/tegra210-p2571.dts

@@ -7,7 +7,7 @@ / {
 	model = "NVIDIA Tegra210 P2571 reference design";
 	compatible = "nvidia,p2571", "nvidia,tegra210";
 
-	pinmux: pinmux@0,700008d4 {
+	pinmux: pinmux@700008d4 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
 

arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi

@@ -2,7 +2,7 @@ / {
 	model = "NVIDIA Tegra210 P2595 I/O board";
 	compatible = "nvidia,p2595", "nvidia,tegra210";
 
-	pinmux: pinmux@0,700008d4 {
+	pinmux: pinmux@700008d4 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
 

arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi

+#include <dt-bindings/input/input.h>
+
 / {
 	model = "NVIDIA Tegra210 P2597 I/O board";
 	compatible = "nvidia,p2597", "nvidia,tegra210";
 
-	pinmux: pinmux@0,700008d4 {
+	pinmux: pinmux@700008d4 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
 
@@ -1260,11 +1262,35 @@ shutdown {
 	};
 
 	/* MMC/SD */
-	sdhci@0,700b0000 {
+	sdhci@700b0000 {
 		status = "okay";
 		bus-width = <4>;
 		no-1-8-v;
 
 		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
 };

arch/arm64/boot/dts/rockchip/Makefile

 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts

@@ -44,6 +44,7 @@
 
 /dts-v1/;
 /include/ "uniphier-ph1-ld20.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {

arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi

+../../../../arm/boot/dts/uniphier-ref-daughter.dtsi
\ No newline at end of file