Merge branch 'hns3-fixes'

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hnae3.h

@@ -537,6 +537,8 @@ struct hnae3_ae_dev {
  *   Get 1588 rx hwstamp
  * get_ts_info
  *   Get phc info
+ * clean_vf_config
+ *   Clean residual vf info after disable sriov
  */
 struct hnae3_ae_ops {
 	int (*init_ae_dev)(struct hnae3_ae_dev *ae_dev);
@@ -730,6 +732,7 @@ struct hnae3_ae_ops {
 			   struct ethtool_ts_info *info);
 	int (*get_link_diagnosis_info)(struct hnae3_handle *handle,
 				       u32 *status_code);
+	void (*clean_vf_config)(struct hnae3_ae_dev *ae_dev, int num_vfs);
 };
 
 struct hnae3_dcb_ops {

drivers/net/ethernet/hisilicon/hns3/hns3_enet.c

@@ -1028,46 +1028,56 @@ static bool hns3_can_use_tx_sgl(struct hns3_enet_ring *ring,
 
 static void hns3_init_tx_spare_buffer(struct hns3_enet_ring *ring)
 {
+	u32 alloc_size = ring->tqp->handle->kinfo.tx_spare_buf_size;
 	struct hns3_tx_spare *tx_spare;
 	struct page *page;
-	u32 alloc_size;
 	dma_addr_t dma;
 	int order;
 
-	alloc_size = ring->tqp->handle->kinfo.tx_spare_buf_size;
 	if (!alloc_size)
 		return;
 
 	order = get_order(alloc_size);
+	if (order >= MAX_ORDER) {
+		if (net_ratelimit())
+			dev_warn(ring_to_dev(ring), "failed to allocate tx spare buffer, exceed to max order\n");
+		return;
+	}
+
 	tx_spare = devm_kzalloc(ring_to_dev(ring), sizeof(*tx_spare),
 				GFP_KERNEL);
 	if (!tx_spare) {
 		/* The driver still work without the tx spare buffer */
 		dev_warn(ring_to_dev(ring), "failed to allocate hns3_tx_spare\n");
-		return;
+		goto devm_kzalloc_error;
 	}
 
 	page = alloc_pages_node(dev_to_node(ring_to_dev(ring)),
 				GFP_KERNEL, order);
 	if (!page) {
 		dev_warn(ring_to_dev(ring), "failed to allocate tx spare pages\n");
-		devm_kfree(ring_to_dev(ring), tx_spare);
-		return;
+		goto alloc_pages_error;
 	}
 
 	dma = dma_map_page(ring_to_dev(ring), page, 0,
 			   PAGE_SIZE << order, DMA_TO_DEVICE);
 	if (dma_mapping_error(ring_to_dev(ring), dma)) {
 		dev_warn(ring_to_dev(ring), "failed to map pages for tx spare\n");
-		put_page(page);
-		devm_kfree(ring_to_dev(ring), tx_spare);
-		return;
+		goto dma_mapping_error;
 	}
 
 	tx_spare->dma = dma;
 	tx_spare->buf = page_address(page);
 	tx_spare->len = PAGE_SIZE << order;
 	ring->tx_spare = tx_spare;
+	return;
+
+dma_mapping_error:
+	put_page(page);
+alloc_pages_error:
+	devm_kfree(ring_to_dev(ring), tx_spare);
+devm_kzalloc_error:
+	ring->tqp->handle->kinfo.tx_spare_buf_size = 0;
 }
 
 /* Use hns3_tx_spare_space() to make sure there is enough buffer
@@ -3050,6 +3060,21 @@ static int hns3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return ret;
 }
 
+/**
+ * hns3_clean_vf_config
+ * @pdev: pointer to a pci_dev structure
+ * @num_vfs: number of VFs allocated
+ *
+ * Clean residual vf config after disable sriov
+ **/
+static void hns3_clean_vf_config(struct pci_dev *pdev, int num_vfs)
+{
+	struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev);
+
+	if (ae_dev->ops->clean_vf_config)
+		ae_dev->ops->clean_vf_config(ae_dev, num_vfs);
+}
+
 /* hns3_remove - Device removal routine
  * @pdev: PCI device information struct
  */
@@ -3088,7 +3113,10 @@ static int hns3_pci_sriov_configure(struct pci_dev *pdev, int num_vfs)
 		else
 			return num_vfs;
 	} else if (!pci_vfs_assigned(pdev)) {
+		int num_vfs_pre = pci_num_vf(pdev);
+
 		pci_disable_sriov(pdev);
+		hns3_clean_vf_config(pdev, num_vfs_pre);
 	} else {
 		dev_warn(&pdev->dev,
 			 "Unable to free VFs because some are assigned to VMs.\n");

drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c

@@ -653,8 +653,8 @@ static void hns3_get_ringparam(struct net_device *netdev,
 	struct hnae3_handle *h = priv->ae_handle;
 	int rx_queue_index = h->kinfo.num_tqps;
 
-	if (hns3_nic_resetting(netdev)) {
-		netdev_err(netdev, "dev resetting!");
+	if (hns3_nic_resetting(netdev) || !priv->ring) {
+		netdev_err(netdev, "failed to get ringparam value, due to dev resetting or uninited\n");
 		return;
 	}
 
@@ -1074,8 +1074,14 @@ static int hns3_check_ringparam(struct net_device *ndev,
 {
 #define RX_BUF_LEN_2K 2048
 #define RX_BUF_LEN_4K 4096
-	if (hns3_nic_resetting(ndev))
+
+	struct hns3_nic_priv *priv = netdev_priv(ndev);
+
+	if (hns3_nic_resetting(ndev) || !priv->ring) {
+		netdev_err(ndev, "failed to set ringparam value, due to dev resetting or uninited\n");
 		return -EBUSY;
+	}
+
 
 	if (param->rx_mini_pending || param->rx_jumbo_pending)
 		return -EINVAL;
@@ -1766,9 +1772,6 @@ static int hns3_set_tx_spare_buf_size(struct net_device *netdev,
 	struct hnae3_handle *h = priv->ae_handle;
 	int ret;
 
-	if (hns3_nic_resetting(netdev))
-		return -EBUSY;
-
 	h->kinfo.tx_spare_buf_size = data;
 
 	ret = hns3_reset_notify(h, HNAE3_DOWN_CLIENT);
@@ -1799,6 +1802,11 @@ static int hns3_set_tunable(struct net_device *netdev,
 	struct hnae3_handle *h = priv->ae_handle;
 	int i, ret = 0;
 
+	if (hns3_nic_resetting(netdev) || !priv->ring) {
+		netdev_err(netdev, "failed to set tunable value, dev resetting!");
+		return -EBUSY;
+	}
+
 	switch (tuna->id) {
 	case ETHTOOL_TX_COPYBREAK:
 		priv->tx_copybreak = *(u32 *)data;
@@ -1818,7 +1826,8 @@ static int hns3_set_tunable(struct net_device *netdev,
 		old_tx_spare_buf_size = h->kinfo.tx_spare_buf_size;
 		new_tx_spare_buf_size = *(u32 *)data;
 		ret = hns3_set_tx_spare_buf_size(netdev, new_tx_spare_buf_size);
-		if (ret) {
+		if (ret ||
+		    (!priv->ring->tx_spare && new_tx_spare_buf_size != 0)) {
 			int ret1;
 
 			netdev_warn(netdev,

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

@@ -12724,6 +12724,55 @@ static int hclge_get_link_diagnosis_info(struct hnae3_handle *handle,
 	return 0;
 }
 
+/* After disable sriov, VF still has some config and info need clean,
+ * which configed by PF.
+ */
+static void hclge_clear_vport_vf_info(struct hclge_vport *vport, int vfid)
+{
+	struct hclge_dev *hdev = vport->back;
+	struct hclge_vlan_info vlan_info;
+	int ret;
+
+	/* after disable sriov, clean VF rate configured by PF */
+	ret = hclge_tm_qs_shaper_cfg(vport, 0);
+	if (ret)
+		dev_err(&hdev->pdev->dev,
+			"failed to clean vf%d rate config, ret = %d\n",
+			vfid, ret);
+
+	vlan_info.vlan_tag = 0;
+	vlan_info.qos = 0;
+	vlan_info.vlan_proto = ETH_P_8021Q;
+	ret = hclge_update_port_base_vlan_cfg(vport,
+					      HNAE3_PORT_BASE_VLAN_DISABLE,
+					      &vlan_info);
+	if (ret)
+		dev_err(&hdev->pdev->dev,
+			"failed to clean vf%d port base vlan, ret = %d\n",
+			vfid, ret);
+
+	ret = hclge_set_vf_spoofchk_hw(hdev, vport->vport_id, false);
+	if (ret)
+		dev_err(&hdev->pdev->dev,
+			"failed to clean vf%d spoof config, ret = %d\n",
+			vfid, ret);
+
+	memset(&vport->vf_info, 0, sizeof(vport->vf_info));
+}
+
+static void hclge_clean_vport_config(struct hnae3_ae_dev *ae_dev, int num_vfs)
+{
+	struct hclge_dev *hdev = ae_dev->priv;
+	struct hclge_vport *vport;
+	int i;
+
+	for (i = 0; i < num_vfs; i++) {
+		vport = &hdev->vport[i + HCLGE_VF_VPORT_START_NUM];
+
+		hclge_clear_vport_vf_info(vport, i);
+	}
+}
+
 static const struct hnae3_ae_ops hclge_ops = {
 	.init_ae_dev = hclge_init_ae_dev,
 	.uninit_ae_dev = hclge_uninit_ae_dev,
@@ -12825,6 +12874,7 @@ static const struct hnae3_ae_ops hclge_ops = {
 	.get_rx_hwts = hclge_ptp_get_rx_hwts,
 	.get_ts_info = hclge_ptp_get_ts_info,
 	.get_link_diagnosis_info = hclge_get_link_diagnosis_info,
+	.clean_vf_config = hclge_clean_vport_config,
 };
 
 static struct hnae3_ae_algo ae_algo = {

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c

@@ -48,7 +48,7 @@ static int hclge_mdio_write(struct mii_bus *bus, int phyid, int regnum,
 	int ret;
 
 	if (test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state))
-		return 0;
+		return -EBUSY;
 
 	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, false);
 
@@ -86,7 +86,7 @@ static int hclge_mdio_read(struct mii_bus *bus, int phyid, int regnum)
 	int ret;
 
 	if (test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state))
-		return 0;
+		return -EBUSY;
 
 	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, true);