Commit 2ecab085 authored by Aaron Ma's avatar Aaron Ma Committed by Greg Kroah-Hartman

usb: xhci: fix uninitialized completion when USB3 port got wrong status

commit 958c0bd8 upstream.

Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on
Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3,
after clear port reset it works fine.

Since this device is registered on USB3 roothub at boot,
when port status reports not superspeed, xhci_get_port_status will call
an uninitialized completion in bus_state[0].
Kernel will hang because of NULL pointer.

Restrict the USB2 resume status check in USB2 roothub to fix hang issue.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarAaron Ma <aaron.ma@canonical.com>
Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b008f3b2
...@@ -895,7 +895,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, ...@@ -895,7 +895,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
status |= USB_PORT_STAT_SUSPEND; status |= USB_PORT_STAT_SUSPEND;
} }
if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&
!DEV_SUPERSPEED_ANY(raw_port_status)) { !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) {
if ((raw_port_status & PORT_RESET) || if ((raw_port_status & PORT_RESET) ||
!(raw_port_status & PORT_PE)) !(raw_port_status & PORT_PE))
return 0xffffffff; return 0xffffffff;
......
...@@ -1746,7 +1746,7 @@ static void handle_port_status(struct xhci_hcd *xhci, ...@@ -1746,7 +1746,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
* RExit to a disconnect state). If so, let the the driver know it's * RExit to a disconnect state). If so, let the the driver know it's
* out of the RExit state. * out of the RExit state.
*/ */
if (!DEV_SUPERSPEED_ANY(portsc) && if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 &&
test_and_clear_bit(faked_port_index, test_and_clear_bit(faked_port_index,
&bus_state->rexit_ports)) { &bus_state->rexit_ports)) {
complete(&bus_state->rexit_done[faked_port_index]); complete(&bus_state->rexit_done[faked_port_index]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment