Skip to content

L
linux
Commit 2ee004f7 authored by Maarten Lankhorst's avatar Maarten Lankhorst
2 Browse files
Options

drm/i915: Remove queue_flip pointer. 

With the removal of cs support this is no longer reachable.
Can be revived if needed.
Signed-off-by: default avatarMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-15-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: default avatarPatrik Jakobsson <patrik.jakobsson@linux.intel.com>
parent b8d2afae
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 264 deletions
drivers/gpu/drm/i915/i915_drv.h
View file @ 2ee004f7
......@@ -618,11 +618,6 @@ struct drm_i915_display_funcs {
void (*audio_codec_disable)(struct intel_encoder *encoder);
void (*fdi_link_train)(struct drm_crtc *crtc);
void (*init_clock_gating)(struct drm_device *dev);
int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_request *req,
uint64_t gtt_offset);
void (*hpd_irq_setup)(struct drm_i915_private *dev_priv);
/* clock updates for mode set */
/* cursor updates */
......
drivers/gpu/drm/i915/intel_display.c
View file @ 2ee004f7
......@@ -10964,237 +10964,6 @@ void intel_finish_page_flip_mmio(struct drm_i915_private *dev_priv, int pipe)
spin_unlock_irqrestore(&dev->event_lock, flags);
}
static int intel_gen2_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_request *req,
uint64_t gtt_offset)
{
struct intel_engine_cs *engine = req->engine;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
u32 flip_mask;
int ret;
ret = intel_ring_begin(req, 6);
if (ret)
return ret;
/* Can't queue multiple flips, so wait for the previous
* one to finish before executing the next.
*/
if (intel_crtc->plane)
flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
else
flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
intel_ring_emit(engine, MI_NOOP);
intel_ring_emit(engine, MI_DISPLAY_FLIP |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
intel_ring_emit(engine, fb->pitches[0]);
intel_ring_emit(engine, gtt_offset);
intel_ring_emit(engine, 0); /* aux display base address, unused */
return 0;
}
static int intel_gen3_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_request *req,
uint64_t gtt_offset)
{
struct intel_engine_cs *engine = req->engine;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
u32 flip_mask;
int ret;
ret = intel_ring_begin(req, 6);
if (ret)
return ret;
if (intel_crtc->plane)
flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
else
flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
intel_ring_emit(engine, MI_NOOP);
intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
intel_ring_emit(engine, fb->pitches[0]);
intel_ring_emit(engine, gtt_offset);
intel_ring_emit(engine, MI_NOOP);
return 0;
}
static int intel_gen4_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_request *req,
uint64_t gtt_offset)
{
struct intel_engine_cs *engine = req->engine;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t pf, pipesrc;
int ret;
ret = intel_ring_begin(req, 4);
if (ret)
return ret;
/* i965+ uses the linear or tiled offsets from the
* Display Registers (which do not change across a page-flip)
* so we need only reprogram the base address.
*/
intel_ring_emit(engine, MI_DISPLAY_FLIP |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
intel_ring_emit(engine, fb->pitches[0]);
intel_ring_emit(engine, gtt_offset | obj->tiling_mode);
/* XXX Enabling the panel-fitter across page-flip is so far
* untested on non-native modes, so ignore it for now.
* pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
*/
pf = 0;
pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
intel_ring_emit(engine, pf | pipesrc);
return 0;
}
static int intel_gen6_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_request *req,
uint64_t gtt_offset)
{
struct intel_engine_cs *engine = req->engine;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t pf, pipesrc;
int ret;
ret = intel_ring_begin(req, 4);
if (ret)
return ret;
intel_ring_emit(engine, MI_DISPLAY_FLIP |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
intel_ring_emit(engine, fb->pitches[0] | obj->tiling_mode);
intel_ring_emit(engine, gtt_offset);
/* Contrary to the suggestions in the documentation,
* "Enable Panel Fitter" does not seem to be required when page
* flipping with a non-native mode, and worse causes a normal
* modeset to fail.
* pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
*/
pf = 0;
pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
intel_ring_emit(engine, pf | pipesrc);
return 0;
}
static int intel_gen7_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_request *req,
uint64_t gtt_offset)
{
struct intel_engine_cs *engine = req->engine;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t plane_bit = 0;
int len, ret;
switch (intel_crtc->plane) {
case PLANE_A:
plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
break;
case PLANE_B:
plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
break;
case PLANE_C:
plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
break;
default:
WARN_ONCE(1, "unknown plane in flip command\n");
return -ENODEV;
}
len = 4;
if (engine->id == RCS) {
len += 6;
/*
* On Gen 8, SRM is now taking an extra dword to accommodate
* 48bits addresses, and we need a NOOP for the batch size to
* stay even.
*/
if (IS_GEN8(dev))
len += 2;
}
/*
* BSpec MI_DISPLAY_FLIP for IVB:
* "The full packet must be contained within the same cache line."
*
* Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
* cacheline, if we ever start emitting more commands before
* the MI_DISPLAY_FLIP we may need to first emit everything else,
* then do the cacheline alignment, and finally emit the
* MI_DISPLAY_FLIP.
*/
ret = intel_ring_cacheline_align(req);
if (ret)
return ret;
ret = intel_ring_begin(req, len);
if (ret)
return ret;
/* Unmask the flip-done completion message. Note that the bspec says that
* we should do this for both the BCS and RCS, and that we must not unmask
* more than one flip event at any time (or ensure that one flip message
* can be sent by waiting for flip-done prior to queueing new flips).
* Experimentation says that BCS works despite DERRMR masking all
* flip-done completion events and that unmasking all planes at once
* for the RCS also doesn't appear to drop events. Setting the DERRMR
* to zero does lead to lockups within MI_DISPLAY_FLIP.
*/
if (engine->id == RCS) {
intel_ring_emit(engine, MI_LOAD_REGISTER_IMM(1));
intel_ring_emit_reg(engine, DERRMR);
intel_ring_emit(engine, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
DERRMR_PIPEB_PRI_FLIP_DONE |
DERRMR_PIPEC_PRI_FLIP_DONE));
if (IS_GEN8(dev))
intel_ring_emit(engine, MI_STORE_REGISTER_MEM_GEN8 |
MI_SRM_LRM_GLOBAL_GTT);
else
intel_ring_emit(engine, MI_STORE_REGISTER_MEM |
MI_SRM_LRM_GLOBAL_GTT);
intel_ring_emit_reg(engine, DERRMR);
intel_ring_emit(engine, engine->scratch.gtt_offset + 256);
if (IS_GEN8(dev)) {
intel_ring_emit(engine, 0);
intel_ring_emit(engine, MI_NOOP);
}
}
intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 | plane_bit);
intel_ring_emit(engine, (fb->pitches[0] | obj->tiling_mode));
intel_ring_emit(engine, gtt_offset);
intel_ring_emit(engine, (MI_NOOP));
return 0;
}
static void intel_mmio_flip_work_func(struct work_struct *w)
{
struct intel_flip_work *work =
......@@ -14752,34 +14521,6 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
dev_priv->display.modeset_calc_cdclk =
broxton_modeset_calc_cdclk;
}
switch (INTEL_INFO(dev_priv)->gen) {
case 2:
dev_priv->display.queue_flip = intel_gen2_queue_flip;
break;
case 3:
dev_priv->display.queue_flip = intel_gen3_queue_flip;
break;
case 4:
case 5:
dev_priv->display.queue_flip = intel_gen4_queue_flip;
break;
case 6:
dev_priv->display.queue_flip = intel_gen6_queue_flip;
break;
case 7:
case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
dev_priv->display.queue_flip = intel_gen7_queue_flip;
break;
case 9:
/* Drop through - unsupported since execlist only. */
default:
/* Default just returns -ENODEV to indicate unsupported */
break;
}
}
/*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7