Commit 2f0bb2a0 authored by Tony Lindgren's avatar Tony Lindgren Committed by Felipe Balbi

usb: musb: Allow building in all the DMA code

With recent changes to MUSB code, we can now now get rid of
the Kconfig choise for the DMA code and allow building in any
of the desired DMA code. This makes life easier for distros.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent d3cb25a1
......@@ -124,19 +124,20 @@ config USB_MUSB_JZ4740
config USB_MUSB_AM335X_CHILD
tristate
choice
prompt 'MUSB DMA mode'
default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM || USB_MUSB_JZ4740
default USB_UX500_DMA if USB_MUSB_UX500
default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
default USB_TUSB_OMAP_DMA if USB_MUSB_TUSB6010
default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X \
|| USB_MUSB_DSPS
comment "MUSB DMA mode"
config MUSB_PIO_ONLY
bool 'Disable DMA (always use PIO)'
help
Unfortunately, only one option can be enabled here. Ideally one
should be able to build all these drivers into one kernel to
allow using DMA on multiplatform kernels.
All data is copied between memory and FIFO by the CPU.
DMA controllers are ignored.
Do not choose this unless DMA support for your SOC or board
is unavailable (or unstable). When DMA is enabled at compile time,
you can still disable it at run time using the "use_dma=n" module
parameter.
if !MUSB_PIO_ONLY
config USB_UX500_DMA
bool 'ST Ericsson Ux500'
......@@ -168,17 +169,6 @@ config USB_TUSB_OMAP_DMA
help
Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
config MUSB_PIO_ONLY
bool 'Disable DMA (always use PIO)'
help
All data is copied between memory and FIFO by the CPU.
DMA controllers are ignored.
Do not choose this unless DMA support for your SOC or board
is unavailable (or unstable). When DMA is enabled at compile time,
you can still disable it at run time using the "use_dma=n" module
parameter.
endchoice
endif # !MUSB_PIO_ONLY
endif # USB_MUSB_HDRC
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment