Commit 2f0f3f4f authored by Madhuranath Iyengar's avatar Madhuranath Iyengar Committed by James Bottomley

[SCSI] qla2xxx: Appropriately log FCP priority data messages

Signed-off-by: default avatarGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent d94d10e7
......@@ -41,13 +41,28 @@ qla24xx_fcp_prio_cfg_valid(struct qla_fcp_prio_cfg *pri_cfg, uint8_t flag)
int i, ret, num_valid;
uint8_t *bcode;
struct qla_fcp_prio_entry *pri_entry;
uint32_t *bcode_val_ptr, bcode_val;
ret = 1;
num_valid = 0;
bcode = (uint8_t *)pri_cfg;
bcode_val_ptr = (uint32_t *)pri_cfg;
bcode_val = (uint32_t)(*bcode_val_ptr);
if (bcode[0x0] != 'H' || bcode[0x1] != 'Q' || bcode[0x2] != 'O' ||
bcode[0x3] != 'S') {
if (bcode_val == 0xFFFFFFFF) {
/* No FCP Priority config data in flash */
DEBUG2(printk(KERN_INFO
"%s: No FCP priority config data.\n",
__func__));
return 0;
}
if (bcode[0] != 'H' || bcode[1] != 'Q' || bcode[2] != 'O' ||
bcode[3] != 'S') {
/* Invalid FCP priority data header*/
DEBUG2(printk(KERN_ERR
"%s: Invalid FCP Priority data header. bcode=0x%x\n",
__func__, bcode_val));
return 0;
}
if (flag != 1)
......@@ -60,8 +75,18 @@ qla24xx_fcp_prio_cfg_valid(struct qla_fcp_prio_cfg *pri_cfg, uint8_t flag)
pri_entry++;
}
if (num_valid == 0)
if (num_valid == 0) {
/* No valid FCP priority data entries */
DEBUG2(printk(KERN_ERR
"%s: No valid FCP Priority data entries.\n",
__func__));
ret = 0;
} else {
/* FCP priority data is valid */
DEBUG2(printk(KERN_INFO
"%s: Valid FCP priority data. num entries = %d\n",
__func__, num_valid));
}
return ret;
}
......@@ -78,6 +103,11 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job)
bsg_job->reply->reply_payload_rcv_len = 0;
if (!IS_QLA24XX_TYPE(ha) || !IS_QLA25XX(ha)) {
ret = -EINVAL;
goto exit_fcp_prio_cfg;
}
if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
......
......@@ -566,11 +566,8 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
}
}
if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) {
if (qla24xx_read_fcp_prio_cfg(vha))
qla_printk(KERN_ERR, ha,
"Unable to read FCP priority data.\n");
}
if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha))
qla24xx_read_fcp_prio_cfg(vha);
return (rval);
}
......
......@@ -664,6 +664,11 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
def = 0;
if (IS_QLA25XX(ha))
def = 1;
else if (IS_QLA81XX(ha))
def = 2;
ha->flt_region_flt = flt_addr;
wptr = (uint16_t *)req->ring;
flt = (struct qla_flt_header *)req->ring;
......@@ -691,6 +696,10 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
goto no_flash_data;
}
/* Assign FCP prio region since older FLT's may not have it */
ha->flt_region_fcp_prio = ha->flags.port0 ?
fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
loc = locations[1];
cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region);
for ( ; cnt; cnt--, region++) {
......@@ -773,13 +782,6 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
no_flash_data:
/* Use hardcoded defaults. */
loc = locations[0];
def = 0;
if (IS_QLA24XX_TYPE(ha))
def = 0;
else if (IS_QLA25XX(ha))
def = 1;
else if (IS_QLA81XX(ha))
def = 2;
ha->flt_region_fw = def_fw[def];
ha->flt_region_boot = def_boot[def];
ha->flt_region_vpd_nvram = def_vpd_nvram[def];
......@@ -790,14 +792,13 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
ha->flt_region_fdt = def_fdt[def];
ha->flt_region_npiv_conf = ha->flags.port0 ?
def_npiv_conf0[def] : def_npiv_conf1[def];
ha->flt_region_fcp_prio = ha->flags.port0 ?
fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
done:
DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
"vpd_nvram=0x%x vpd=0x%x nvram=0x%x fdt=0x%x flt=0x%x "
"npiv=0x%x.\n", loc, ha->flt_region_boot, ha->flt_region_fw,
ha->flt_region_vpd_nvram, ha->flt_region_vpd, ha->flt_region_nvram,
ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf));
"npiv=0x%x. fcp_prio_cfg=0x%x\n", loc, ha->flt_region_boot,
ha->flt_region_fw, ha->flt_region_vpd_nvram, ha->flt_region_vpd,
ha->flt_region_nvram, ha->flt_region_fdt, ha->flt_region_flt,
ha->flt_region_npiv_conf, ha->flt_region_fcp_prio));
}
static void
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment