Merge tag 'mmc-v4.6-rc1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC fixes from Ulf Hansson:
 "Here are a couple of mmc fixes intended for v4.6 rc3:

  MMC host:
   - sdhci: Fix regression setting power on Trats2 board
   - sdhci-pci: Add support and PCI IDs for more Broxton host controllers"

* tag 'mmc-v4.6-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers
  mmc: sdhci: Fix regression setting power on Trats2 board

drivers/mmc/host/sdhci-pci-core.c

@@ -390,6 +390,7 @@ static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
 	slot->cd_idx = 0;
 	slot->cd_override_level = true;
 	if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BXT_SD ||
+	    slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BXTM_SD ||
 	    slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_APL_SD)
 		slot->host->mmc_host_ops.get_cd = bxt_get_cd;
 
@@ -1171,6 +1172,30 @@ static const struct pci_device_id pci_ids[] = {
 		.driver_data	= (kernel_ulong_t)&sdhci_intel_byt_sd,
 	},
 
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BXTM_EMMC,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_byt_emmc,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BXTM_SDIO,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_byt_sdio,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BXTM_SD,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_byt_sd,
+	},
+
 	{
 		.vendor		= PCI_VENDOR_ID_INTEL,
 		.device		= PCI_DEVICE_ID_INTEL_APL_EMMC,

drivers/mmc/host/sdhci-pci.h

@@ -28,6 +28,9 @@
 #define PCI_DEVICE_ID_INTEL_BXT_SD	0x0aca
 #define PCI_DEVICE_ID_INTEL_BXT_EMMC	0x0acc
 #define PCI_DEVICE_ID_INTEL_BXT_SDIO	0x0ad0
+#define PCI_DEVICE_ID_INTEL_BXTM_SD	0x1aca
+#define PCI_DEVICE_ID_INTEL_BXTM_EMMC	0x1acc
+#define PCI_DEVICE_ID_INTEL_BXTM_SDIO	0x1ad0
 #define PCI_DEVICE_ID_INTEL_APL_SD	0x5aca
 #define PCI_DEVICE_ID_INTEL_APL_EMMC	0x5acc
 #define PCI_DEVICE_ID_INTEL_APL_SDIO	0x5ad0

drivers/mmc/host/sdhci-pxav3.c

@@ -309,8 +309,30 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 		__func__, uhs, ctrl_2);
 }
 
+static void pxav3_set_power(struct sdhci_host *host, unsigned char mode,
+			    unsigned short vdd)
+{
+	struct mmc_host *mmc = host->mmc;
+	u8 pwr = host->pwr;
+
+	sdhci_set_power(host, mode, vdd);
+
+	if (host->pwr == pwr)
+		return;
+
+	if (host->pwr == 0)
+		vdd = 0;
+
+	if (!IS_ERR(mmc->supply.vmmc)) {
+		spin_unlock_irq(&host->lock);
+		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+		spin_lock_irq(&host->lock);
+	}
+}
+
 static const struct sdhci_ops pxav3_sdhci_ops = {
 	.set_clock = sdhci_set_clock,
+	.set_power = pxav3_set_power,
 	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,

drivers/mmc/host/sdhci.c

@@ -1210,10 +1210,24 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 }
 EXPORT_SYMBOL_GPL(sdhci_set_clock);
 
-static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
-			    unsigned short vdd)
+static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
+				unsigned short vdd)
 {
 	struct mmc_host *mmc = host->mmc;
+
+	spin_unlock_irq(&host->lock);
+	mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+	spin_lock_irq(&host->lock);
+
+	if (mode != MMC_POWER_OFF)
+		sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
+	else
+		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+}
+
+void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
+		     unsigned short vdd)
+{
 	u8 pwr = 0;
 
 	if (mode != MMC_POWER_OFF) {
@@ -1245,7 +1259,6 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 		if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
 			sdhci_runtime_pm_bus_off(host);
-		vdd = 0;
 	} else {
 		/*
 		 * Spec says that we should clear the power reg before setting
@@ -1276,12 +1289,20 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
 		if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
 			mdelay(10);
 	}
+}
+EXPORT_SYMBOL_GPL(sdhci_set_power);
 
-	if (!IS_ERR(mmc->supply.vmmc)) {
-		spin_unlock_irq(&host->lock);
-		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
-		spin_lock_irq(&host->lock);
-	}
+static void __sdhci_set_power(struct sdhci_host *host, unsigned char mode,
+			      unsigned short vdd)
+{
+	struct mmc_host *mmc = host->mmc;
+
+	if (host->ops->set_power)
+		host->ops->set_power(host, mode, vdd);
+	else if (!IS_ERR(mmc->supply.vmmc))
+		sdhci_set_power_reg(host, mode, vdd);
+	else
+		sdhci_set_power(host, mode, vdd);
 }
 
 /*****************************************************************************\
@@ -1431,7 +1452,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		}
 	}
 
-	sdhci_set_power(host, ios->power_mode, ios->vdd);
+	__sdhci_set_power(host, ios->power_mode, ios->vdd);
 
 	if (host->ops->platform_send_init_74_clocks)
 		host->ops->platform_send_init_74_clocks(host, ios->power_mode);

drivers/mmc/host/sdhci.h

@@ -529,6 +529,8 @@ struct sdhci_ops {
 #endif
 
 	void	(*set_clock)(struct sdhci_host *host, unsigned int clock);
+	void	(*set_power)(struct sdhci_host *host, unsigned char mode,
+			     unsigned short vdd);
 
 	int		(*enable_dma)(struct sdhci_host *host);
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
@@ -660,6 +662,8 @@ static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host)
 }
 
 void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
+void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
+		     unsigned short vdd);
 void sdhci_set_bus_width(struct sdhci_host *host, int width);
 void sdhci_reset(struct sdhci_host *host, u8 mask);
 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);