Commit 2f73c392 authored by Peter Meerwald's avatar Peter Meerwald Committed by Bryan Wu

leds: add output driver configuration for pca9633 led driver

the pca9633 leds driver can be used in open-drain or totem pole (a.k.a.
push/pull) output driver mode; default is the later

the patch allows to set the output driver mode using platform data (similar to
configuration inferface provided by the tca6507 led driver)

v2: move leds-pca9633.h to include/linux/platform_data/ (Bryan Wu)
Signed-off-by: default avatarPeter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: default avatarBryan Wu <bryan.wu@canonical.com>
parent e76a322a
...@@ -22,6 +22,7 @@ ...@@ -22,6 +22,7 @@
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/workqueue.h> #include <linux/workqueue.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/platform_data/leds-pca9633.h>
/* LED select registers determine the source that drives LED outputs */ /* LED select registers determine the source that drives LED outputs */
#define PCA9633_LED_OFF 0x0 /* LED driver off */ #define PCA9633_LED_OFF 0x0 /* LED driver off */
...@@ -96,13 +97,13 @@ static int __devinit pca9633_probe(struct i2c_client *client, ...@@ -96,13 +97,13 @@ static int __devinit pca9633_probe(struct i2c_client *client,
const struct i2c_device_id *id) const struct i2c_device_id *id)
{ {
struct pca9633_led *pca9633; struct pca9633_led *pca9633;
struct led_platform_data *pdata; struct pca9633_platform_data *pdata;
int i, err; int i, err;
pdata = client->dev.platform_data; pdata = client->dev.platform_data;
if (pdata) { if (pdata) {
if (pdata->num_leds <= 0 || pdata->num_leds > 4) { if (pdata->leds.num_leds <= 0 || pdata->leds.num_leds > 4) {
dev_err(&client->dev, "board info must claim at most 4 LEDs"); dev_err(&client->dev, "board info must claim at most 4 LEDs");
return -EINVAL; return -EINVAL;
} }
...@@ -119,14 +120,14 @@ static int __devinit pca9633_probe(struct i2c_client *client, ...@@ -119,14 +120,14 @@ static int __devinit pca9633_probe(struct i2c_client *client,
pca9633[i].led_num = i; pca9633[i].led_num = i;
/* Platform data can specify LED names and default triggers */ /* Platform data can specify LED names and default triggers */
if (pdata && i < pdata->num_leds) { if (pdata && i < pdata->leds.num_leds) {
if (pdata->leds[i].name) if (pdata->leds.leds[i].name)
snprintf(pca9633[i].name, snprintf(pca9633[i].name,
sizeof(pca9633[i].name), "pca9633:%s", sizeof(pca9633[i].name), "pca9633:%s",
pdata->leds[i].name); pdata->leds.leds[i].name);
if (pdata->leds[i].default_trigger) if (pdata->leds.leds[i].default_trigger)
pca9633[i].led_cdev.default_trigger = pca9633[i].led_cdev.default_trigger =
pdata->leds[i].default_trigger; pdata->leds.leds[i].default_trigger;
} else { } else {
snprintf(pca9633[i].name, sizeof(pca9633[i].name), snprintf(pca9633[i].name, sizeof(pca9633[i].name),
"pca9633:%d", i); "pca9633:%d", i);
...@@ -145,6 +146,10 @@ static int __devinit pca9633_probe(struct i2c_client *client, ...@@ -145,6 +146,10 @@ static int __devinit pca9633_probe(struct i2c_client *client,
/* Disable LED all-call address and set normal mode */ /* Disable LED all-call address and set normal mode */
i2c_smbus_write_byte_data(client, PCA9633_MODE1, 0x00); i2c_smbus_write_byte_data(client, PCA9633_MODE1, 0x00);
/* Configure output: open-drain or totem pole (push-pull) */
if (pdata && pdata->outdrv == PCA9633_OPEN_DRAIN)
i2c_smbus_write_byte_data(client, PCA9633_MODE2, 0x01);
/* Turn off LEDs */ /* Turn off LEDs */
i2c_smbus_write_byte_data(client, PCA9633_LEDOUT, 0x00); i2c_smbus_write_byte_data(client, PCA9633_LEDOUT, 0x00);
......
/*
* PCA9633 LED chip driver.
*
* Copyright 2012 bct electronic GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#ifndef __LINUX_PCA9633_H
#define __LINUX_PCA9633_H
#include <linux/leds.h>
enum pca9633_outdrv {
PCA9633_OPEN_DRAIN,
PCA9633_TOTEM_POLE, /* aka push-pull */
};
struct pca9633_platform_data {
struct led_platform_data leds;
enum pca9633_outdrv outdrv;
};
#endif /* __LINUX_PCA9633_H*/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment