Commit 2f8d2160 authored by Douglas Anderson's avatar Douglas Anderson Committed by Andrzej Hajda

drm/bridge: analogix_dp: Reorder plat_data->power_off to happen sooner

The current user of the analogix power_off is "analogix_dp-rockchip".
That driver does this:
- deactivate PSR
- turn off a clock

Both of these things (especially deactive PSR) should be done before
we turn the PHY power off and turn off analog power.  Let's move the
callback up.

Note that without this patch (and with
https://patchwork.kernel.org/patch/9553349/ [seanpaul: this patch was
not applied, but it seems like the race can still occur]), I experienced
an error in reboot testing where one thread was at:

  rockchip_drm_psr_deactivate
  rockchip_dp_powerdown
  analogix_dp_bridge_disable
  drm_bridge_disable

...and the other thread was at:

  analogix_dp_send_psr_spd
  analogix_dp_enable_psr
  analogix_dp_psr_set
  psr_flush_handler

The flush handler thread was finding AUX channel errors and eventually
reported "Failed to apply PSR", where I had a kgdb breakpoint. Presumably
the device would have eventually given up and shut down anyway, but it
seems better to fix the order to be more correct.

Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarSean Paul <seanpaul@chromium.org>
Signed-off-by: default avatarThierry Escande <thierry.escande@collabora.com>
Reviewed-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: default avatarArchit Taneja <architt@codeaurora.org>
Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-19-enric.balletbo@collabora.com
parent 6f4638a1
......@@ -1337,12 +1337,13 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
}
disable_irq(dp->irq);
analogix_dp_set_analog_power_down(dp, POWER_ALL, 1);
phy_power_off(dp->phy);
if (dp->plat_data->power_off)
dp->plat_data->power_off(dp->plat_data);
analogix_dp_set_analog_power_down(dp, POWER_ALL, 1);
phy_power_off(dp->phy);
clk_disable_unprepare(dp->clock);
pm_runtime_put_sync(dp->dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment