Commit 2faf4ebc authored by Frank Li's avatar Frank Li Committed by Shawn Guo

arm64: dts: freescale: imx8qxp-mek: enable cadence usb3

Enable USB3 controller, phy and typec related nodes.
Signed-off-by: default avatarFrank Li <Frank.Li@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent a8bd7f15
......@@ -6,6 +6,7 @@
/dts-v1/;
#include "imx8qxp.dtsi"
#include <dt-bindings/usb/pd.h>
/ {
model = "Freescale i.MX8QXP MEK";
......@@ -28,6 +29,21 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
gpio-sbu-mux {
compatible = "gpio-sbu-mux";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec_mux>;
select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
orientation-switch;
port {
usb3_data_ss: endpoint {
remote-endpoint = <&typec_con_ss>;
};
};
};
};
&dsp {
......@@ -127,6 +143,42 @@ light-sensor@44 {
};
};
};
ptn5110: tcpc@50 {
compatible = "nxp,ptn5110";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec>;
reg = <0x50>;
interrupt-parent = <&lsio_gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
port {
typec_dr_sw: endpoint {
remote-endpoint = <&usb3_drd_sw>;
};
};
usb_con1: connector {
compatible = "usb-c-connector";
label = "USB-C";
power-role = "source";
data-role = "dual";
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
typec_con_ss: endpoint {
remote-endpoint = <&usb3_data_ss>;
};
};
};
};
};
};
&lpuart0 {
......@@ -204,6 +256,27 @@ &usdhc2 {
status = "okay";
};
&usb3_phy {
status = "okay";
};
&usbotg3 {
status = "okay";
};
&usbotg3_cdns3 {
dr_mode = "otg";
usb-role-switch;
status = "okay";
port {
usb3_drd_sw: endpoint {
remote-endpoint = <&typec_dr_sw>;
};
};
};
&vpu {
compatible = "nxp,imx8qxp-vpu";
status = "okay";
......@@ -267,6 +340,18 @@ IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020
>;
};
pinctrl_typec: typecgrp {
fsl,pins = <
IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021
>;
};
pinctrl_typec_mux: typecmuxgrp {
fsl,pins = <
IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x60
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment