Merge branches 'acpi-dptf', 'acpi-processor', 'acpi-tables' and 'acpi-platform'

* acpi-dptf:
  ACPI: DPTF: Add new PCH FIVR methods

* acpi-processor:
  ACPI: processor: Replace deprecated CPU-hotplug functions

* acpi-tables:
  ACPI: tables: FPDT: Do not print FW_BUG message if record types are reserved
  ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype

* acpi-platform:
  ACPI: platform-profile: call sysfs_notify() from platform_profile_store()

Documentation/ABI/testing/sysfs-platform-dptf

@@ -111,3 +111,43 @@ Contact:	linux-acpi@vger.kernel.org
 Description:
 		(RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
 		when FIVR clock is 38.4MHz.
+
+What:		/sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_freq_mhz
+Date:		September, 2021
+KernelVersion:	v5.15
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		(RO) Get the FIVR switching control frequency in MHz.
+
+What:		/sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_fault_status
+Date:		September, 2021
+KernelVersion:	v5.15
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		(RO) Read the FIVR switching frequency control fault status.
+
+What:		/sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/ssc_clock_info
+Date:		September, 2021
+KernelVersion:	v5.15
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		(RO) Presents SSC (spread spectrum clock) information for EMI
+		(Electro magnetic interference) control. This is a bit mask.
+		Bits	Description
+		[7:0]	Sets clock spectrum spread percentage:
+			0x00=0.2% , 0x3F=10%
+			1 LSB = 0.1% increase in spread (for
+			settings 0x01 thru 0x1C)
+			1 LSB = 0.2% increase in spread (for
+			settings 0x1E thru 0x3F)
+		[8]	When set to 1, enables spread
+			spectrum clock
+		[9]	0: Triangle mode. FFC frequency
+			walks around the Fcenter in a linear
+			fashion
+			1: Random walk mode. FFC frequency
+			changes randomly within the SSC
+			(Spread spectrum clock) range
+		[10]	0: No white noise. 1: Add white noise
+			to spread waveform
+		[11]	When 1, future writes are ignored.

Documentation/ABI/testing/sysfs-platform_profile

@@ -26,3 +26,10 @@ Contact:	Hans de Goede <hdegoede@redhat.com>
 Description:	Reading this file gives the current selected profile for this
 		device. Writing this file with one of the strings from
 		platform_profile_choices changes the profile to the new value.
+
+		This file can be monitored for changes by polling for POLLPRI,
+		POLLPRI will be signalled on any changes, independent of those
+		changes coming from a userspace write; or coming from another
+		source such as e.g. a hotkey triggered profile change handled
+		either directly by the embedded-controller or fully handled
+		inside the kernel.

drivers/acpi/acpi_fpdt.c

@@ -220,8 +220,8 @@ static int fpdt_process_subtable(u64 address, u32 subtable_type)
 			break;
 
 		default:
-			pr_err(FW_BUG "Invalid record %d found.\n", record_header->type);
-			return -EINVAL;
+			/* Other types are reserved in ACPI 6.4 spec. */
+			break;
 		}
 	}
 	return 0;
@@ -254,8 +254,7 @@ static int __init acpi_init_fpdt(void)
 					      subtable->type);
 			break;
 		default:
-			pr_info(FW_BUG "Invalid subtable type %d found.\n",
-			       subtable->type);
+			/* Other types are reserved in ACPI 6.4 spec. */
 			break;
 		}
 		offset += sizeof(*subtable);

drivers/acpi/acpi_pad.c

@@ -249,12 +249,12 @@ static void set_power_saving_task_num(unsigned int num)
 
 static void acpi_pad_idle_cpus(unsigned int num_cpus)
 {
-	get_online_cpus();
+	cpus_read_lock();
 
 	num_cpus = min_t(unsigned int, num_cpus, num_online_cpus());
 	set_power_saving_task_num(num_cpus);
 
-	put_online_cpus();
+	cpus_read_unlock();
 }
 
 static uint32_t acpi_pad_idle_cpus_num(void)

drivers/acpi/acpi_processor.c

@@ -182,7 +182,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 		return -ENODEV;
 
 	cpu_maps_update_begin();
-	cpu_hotplug_begin();
+	cpus_write_lock();
 
 	ret = acpi_map_cpu(pr->handle, pr->phys_id, pr->acpi_id, &pr->id);
 	if (ret)
@@ -203,7 +203,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 	pr->flags.need_hotplug_init = 1;
 
 out:
-	cpu_hotplug_done();
+	cpus_write_unlock();
 	cpu_maps_update_done();
 	return ret;
 }
@@ -454,13 +454,13 @@ static void acpi_processor_remove(struct acpi_device *device)
 	per_cpu(processors, pr->id) = NULL;
 
 	cpu_maps_update_begin();
-	cpu_hotplug_begin();
+	cpus_write_lock();
 
 	/* Remove the CPU. */
 	arch_unregister_cpu(pr->id);
 	acpi_unmap_cpu(pr->id);
 
-	cpu_hotplug_done();
+	cpus_write_unlock();
 	cpu_maps_update_done();
 
 	try_offline_node(cpu_to_node(pr->id));

drivers/acpi/dptf/dptf_pch_fivr.c

@@ -90,15 +90,24 @@ static ssize_t name##_store(struct device *dev,\
 
 PCH_FIVR_SHOW(freq_mhz_low_clock, GFC0)
 PCH_FIVR_SHOW(freq_mhz_high_clock, GFC1)
+PCH_FIVR_SHOW(ssc_clock_info, GEMI)
+PCH_FIVR_SHOW(fivr_switching_freq_mhz, GFCS)
+PCH_FIVR_SHOW(fivr_switching_fault_status, GFFS)
 PCH_FIVR_STORE(freq_mhz_low_clock, RFC0)
 PCH_FIVR_STORE(freq_mhz_high_clock, RFC1)
 
 static DEVICE_ATTR_RW(freq_mhz_low_clock);
 static DEVICE_ATTR_RW(freq_mhz_high_clock);
+static DEVICE_ATTR_RO(ssc_clock_info);
+static DEVICE_ATTR_RO(fivr_switching_freq_mhz);
+static DEVICE_ATTR_RO(fivr_switching_fault_status);
 
 static struct attribute *fivr_attrs[] = {
 	&dev_attr_freq_mhz_low_clock.attr,
 	&dev_attr_freq_mhz_high_clock.attr,
+	&dev_attr_ssc_clock_info.attr,
+	&dev_attr_fivr_switching_freq_mhz.attr,
+	&dev_attr_fivr_switching_fault_status.attr,
 	NULL
 };
 

drivers/acpi/platform_profile.c

@@ -106,6 +106,9 @@ static ssize_t platform_profile_store(struct device *dev,
 	}
 
 	err = cur_profile->profile_set(cur_profile, i);
+	if (!err)
+		sysfs_notify(acpi_kobj, NULL, "platform_profile");
+
 	mutex_unlock(&profile_lock);
 	if (err)
 		return err;

drivers/acpi/processor_idle.c

@@ -1301,7 +1301,7 @@ int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
 	if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
 
 		/* Protect against cpu-hotplug */
-		get_online_cpus();
+		cpus_read_lock();
 		cpuidle_pause_and_lock();
 
 		/* Disable all cpuidle devices */
@@ -1330,7 +1330,7 @@ int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
 			}
 		}
 		cpuidle_resume_and_unlock();
-		put_online_cpus();
+		cpus_read_unlock();
 	}
 
 	return 0;

drivers/acpi/spcr.c

@@ -136,6 +136,7 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
 		break;
 	case ACPI_DBG2_16550_COMPATIBLE:
 	case ACPI_DBG2_16550_SUBSET:
+	case ACPI_DBG2_16550_WITH_GAS:
 		uart = "uart";
 		break;
 	default: