Commit 300218b0 authored by Peter Chiu's avatar Peter Chiu Committed by Matthias Brugger

arm64: dts: mt7986: add built-in Wi-Fi device nodes

This enables built-in 802.11ax Wi-Fi support.
Reviewed-by: default avatarSam Shih <sam.shih@mediatek.com>
Reviewed-by: default avatarRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: default avatarPeter Chiu <chui-hao.chiu@mediatek.com>
Link: https://lore.kernel.org/r/20220901130552.26234-1-chui-hao.chiu@mediatek.comSigned-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent 260c04d4
......@@ -115,6 +115,13 @@ &uart2 {
status = "okay";
};
&wifi {
status = "okay";
pinctrl-names = "default", "dbdc";
pinctrl-0 = <&wf_2g_5g_pins>;
pinctrl-1 = <&wf_dbdc_pins>;
};
&pio {
uart1_pins: uart1-pins {
mux {
......@@ -129,4 +136,35 @@ mux {
groups = "uart2";
};
};
wf_2g_5g_pins: wf-2g-5g-pins {
mux {
function = "wifi";
groups = "wf_2g", "wf_5g";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
wf_dbdc_pins: wf-dbdc-pins {
mux {
function = "wifi";
groups = "wf_dbdc";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA";
drive-strength = <4>;
};
};
};
......@@ -7,6 +7,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt7986-clk.h>
#include <dt-bindings/reset/mt7986-resets.h>
/ {
interrupt-parent = <&gic>;
......@@ -70,6 +71,11 @@ secmon_reserved: secmon@43000000 {
reg = <0 0x43000000 0 0x30000>;
no-map;
};
wmcpu_emi: wmcpu-reserved@4fc00000 {
no-map;
reg = <0 0x4fc00000 0 0x00100000>;
};
};
timer {
......@@ -261,6 +267,23 @@ eth: ethernet@15100000 {
#size-cells = <0>;
status = "disabled";
};
wifi: wifi@18000000 {
compatible = "mediatek,mt7986-wmac";
resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
reset-names = "consys";
clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
<&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
clock-names = "mcu", "ap2conn";
reg = <0 0x18000000 0 0x1000000>,
<0 0x10003000 0 0x1000>,
<0 0x11d10000 0 0x1000>;
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
memory-region = <&wmcpu_emi>;
};
};
};
......@@ -98,3 +98,43 @@ fixed-link {
};
};
};
&wifi {
status = "okay";
pinctrl-names = "default", "dbdc";
pinctrl-0 = <&wf_2g_5g_pins>;
pinctrl-1 = <&wf_dbdc_pins>;
};
&pio {
wf_2g_5g_pins: wf-2g-5g-pins {
mux {
function = "wifi";
groups = "wf_2g", "wf_5g";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
wf_dbdc_pins: wf-dbdc-pins {
mux {
function = "wifi";
groups = "wf_dbdc";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA";
drive-strength = <4>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment