Commit 30185b69 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "It looks like a smaller batch of clk updates this time around.

  In the core framework we just have some minor tweaks and a debugfs
  feature, so not much to see there. The driver updates are fairly well
  split between AT91 and Qualcomm clk support. Adding those two drivers
  together equals about 50% of the diffstat.

  Otherwise, the big amount of work this time was on supporting
  Broadcom's Raspberry Pi firmware clks.

  Highlights:

  Core:
   - Document clk_hw_round_rate() so it gets some more use
   - Remove unused __clk_get_flags()
   - Add a prepare/enable debugfs feature similar to rate setting

  New Drivers:
   - Add support for SAMA7G5 SoC clks
   - Enable CPU clks on Qualcomm IPQ6018 SoCs
   - Enable CPU clks on Qualcomm MSM8996 SoCs
   - GPU clk support for Qualcomm SM8150 and SM8250 SoCs
   - Audio clks on Qualcomm SC7180 SoCs
   - Microchip Sparx5 DPLL clk
   - Add support for the new Renesas RZ/G2H (R8A774E1) SoC

  Updates:
   - Make defines for bcm63xx-gate clks to use in DT
   - Support BCM2711 SoC firmware clks
   - Add HDMI clks for BCM2711 SoCs
   - Add RTC related clks on Ingenic SoCs
   - Support USB PHY clks on Ingenic SoCs
   - Support gate clks on BCM6318 SoCs
   - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
   - Use poll_timeout functions in Rockchip clk driver
   - Support Rockchip rk3288w SoC variant
   - Mark mac_lbtest critical on Rockchip rk3188
   - Add CAAM clock support for i.MX vf610 driver
   - Add MU root clock support for i.MX imx8mp driver
   - Amlogic g12: add neural network accelerator clock sources
   - Amlogic meson8: remove critical flag for main PLL divider
   - Amlogic meson8: add video decoder clock gates
   - Convert one more Renesas DT binding to json-schema
   - Enhance critical clock handling on Renesas platforms to only
     consider clocks that were enabled at boot time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits)
  clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
  ipq806x: gcc: add support for child probe
  clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
  clk: qcom: ipq8074: Add correct index for PCIe clocks
  clk: <linux/clk-provider.h>: drop a duplicated word
  clk: renesas: cpg-mssr: Add r8a774e1 support
  dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
  clk: Drop duplicate selection in Kconfig
  clk: qcom: smd: Add support for MSM8992/4 rpm clocks
  clk: qcom: ipq8074: Add missing clocks for pcie
  dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
  Replace HTTP links with HTTPS ones: Common CLK framework
  clk: qcom: Add CPU clock driver for msm8996
  dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
  soc: qcom: Separate kryo l2 accessors from PMU driver
  clk: meson: meson8b: add the vclk2_en gate clock
  clk: meson: meson8b: add the vclk_en gate clock
  clk: qcom: Fix return value check in apss_ipq6018_probe()
  clk: bcm: dvp: Add missing module informations
  clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
  ...
parents 0f43283b 63e95849
Raspberry Pi VideoCore firmware driver
Required properties:
- compatible: Should be "raspberrypi,bcm2835-firmware"
- mboxes: Phandle to the firmware device's Mailbox.
(See: ../mailbox/mailbox.txt for more information)
Example:
firmware {
compatible = "raspberrypi,bcm2835-firmware";
mboxes = <&mailbox>;
};
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Raspberry Pi VideoCore firmware driver
maintainers:
- Eric Anholt <eric@anholt.net>
- Stefan Wahren <wahrenst@gmx.net>
properties:
compatible:
items:
- const: raspberrypi,bcm2835-firmware
- const: simple-bus
mboxes:
$ref: '/schemas/types.yaml#/definitions/phandle'
description: |
Phandle to the firmware device's Mailbox.
(See: ../mailbox/mailbox.txt for more information)
clocks:
type: object
properties:
compatible:
const: raspberrypi,firmware-clocks
"#clock-cells":
const: 1
description: >
The argument is the ID of the clocks contained by the
firmware messages.
required:
- compatible
- "#clock-cells"
additionalProperties: false
required:
- compatible
- mboxes
examples:
- |
firmware {
compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
mboxes = <&mailbox>;
firmware_clocks: clocks {
compatible = "raspberrypi,firmware-clocks";
#clock-cells = <1>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom BCM2711 HDMI DVP Device Tree Bindings
maintainers:
- Maxime Ripard <mripard@kernel.org>
properties:
"#clock-cells":
const: 1
"#reset-cells":
const: 1
compatible:
const: brcm,brcm2711-dvp
reg:
maxItems: 1
clocks:
maxItems: 1
required:
- "#clock-cells"
- "#reset-cells"
- compatible
- reg
- clocks
additionalProperties: false
examples:
- |
dvp: clock@7ef00000 {
compatible = "brcm,brcm2711-dvp";
reg = <0x7ef00000 0x10>;
clocks = <&clk_108MHz>;
#clock-cells = <1>;
#reset-cells = <1>;
};
...
......@@ -3,6 +3,8 @@ Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
Required properties:
- compatible: must be one of:
"brcm,bcm3368-clocks"
"brcm,bcm6318-clocks"
"brcm,bcm6318-ubus-clocks"
"brcm,bcm6328-clocks"
"brcm,bcm6358-clocks"
"brcm,bcm6362-clocks"
......
......@@ -9,7 +9,7 @@ specifier is an array of zero, one or more cells identifying the clock
output on a device. The length of a clock specifier is defined by the
value of a #clock-cells property in the clock provider node.
[1] http://patchwork.ozlabs.org/patch/31551/
[1] https://patchwork.ozlabs.org/patch/31551/
==Clock providers==
......
......@@ -31,6 +31,29 @@ Required properties:
- 5p49v5933 and
- 5p49v5935: (optional) property not present or "clkin".
For all output ports, a corresponding, optional child node named OUT1,
OUT2, etc. can represent a each output, and the node can be used to
specify the following:
- itd,mode: can be one of the following:
- VC5_LVPECL
- VC5_CMOS
- VC5_HCSL33
- VC5_LVDS
- VC5_CMOS2
- VC5_CMOSD
- VC5_HCSL25
- idt,voltage-microvolts: can be one of the following
- 1800000
- 2500000
- 3300000
- idt,slew-percent: Percent of normal, can be one of
- 80
- 85
- 90
- 100
==Mapping between clock specifier and physical pins==
When referencing the provided clock in the DT using phandle and
......@@ -81,6 +104,16 @@ i2c-master-node {
/* Connect XIN input to 25MHz reference */
clocks = <&ref25m>;
clock-names = "xin";
OUT1 {
itd,mode = <VC5_CMOS>;
idt,voltage-microvolts = <1800000>;
idt,slew-percent = <80>;
};
OUT2 {
...
};
...
};
};
......
......@@ -15,7 +15,9 @@ description:
properties:
compatible:
const: qcom,msm8916-a53pll
enum:
- qcom,ipq6018-a53pll
- qcom,msm8916-a53pll
reg:
maxItems: 1
......@@ -23,6 +25,14 @@ properties:
'#clock-cells':
const: 0
clocks:
items:
- description: board XO clock
clock-names:
items:
- const: xo
required:
- compatible
- reg
......@@ -38,3 +48,12 @@ examples:
reg = <0xb016000 0x40>;
#clock-cells = <0>;
};
#Example 2 - A53 PLL found on IPQ6018 devices
- |
a53pll_ipq: clock-controller@b116000 {
compatible = "qcom,ipq6018-a53pll";
reg = <0x0b116000 0x40>;
#clock-cells = <0>;
clocks = <&xo>;
clock-names = "xo";
};
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/qcom,kryocc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm clock controller for MSM8996 CPUs
maintainers:
- Loic Poulain <loic.poulain@linaro.org>
description: |
Qualcomm CPU clock controller for MSM8996 CPUs, clock 0 is for Power cluster
and clock 1 is for Perf cluster.
properties:
compatible:
enum:
- qcom,msm8996-apcc
reg:
maxItems: 1
'#clock-cells':
const: 1
clocks:
items:
- description: Primary PLL clock for power cluster (little)
- description: Primary PLL clock for perf cluster (big)
- description: Alternate PLL clock for power cluster (little)
- description: Alternate PLL clock for perf cluster (big)
clock-names:
items:
- const: pwrcl_pll
- const: perfcl_pll
- const: pwrcl_alt_pll
- const: perfcl_alt_pll
required:
- compatible
- reg
- '#clock-cells'
additionalProperties: false
examples:
# Example for msm8996
- |
kryocc: clock-controller@6400000 {
compatible = "qcom,msm8996-apcc";
reg = <0x6400000 0x90000>;
#clock-cells = <1>;
};
...
......@@ -13,13 +13,17 @@ Required properties :
"qcom,rpmcc-msm8660", "qcom,rpmcc"
"qcom,rpmcc-apq8060", "qcom,rpmcc"
"qcom,rpmcc-msm8916", "qcom,rpmcc"
"qcom,rpmcc-msm8936", "qcom,rpmcc"
"qcom,rpmcc-msm8974", "qcom,rpmcc"
"qcom,rpmcc-msm8976", "qcom,rpmcc"
"qcom,rpmcc-apq8064", "qcom,rpmcc"
"qcom,rpmcc-ipq806x", "qcom,rpmcc"
"qcom,rpmcc-msm8992",·"qcom,rpmcc"
"qcom,rpmcc-msm8994",·"qcom,rpmcc"
"qcom,rpmcc-msm8996", "qcom,rpmcc"
"qcom,rpmcc-msm8998", "qcom,rpmcc"
"qcom,rpmcc-qcs404", "qcom,rpmcc"
"qcom,rpmcc-sdm660", "qcom,rpmcc"
- #clock-cells : shall contain 1
......
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/renesas,cpg-clocks.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas Clock Pulse Generator (CPG)
maintainers:
- Geert Uytterhoeven <geert+renesas@glider.be>
description:
The Clock Pulse Generator (CPG) generates core clocks for the SoC. It
includes PLLs, and fixed and variable ratio dividers.
The CPG may also provide a Clock Domain for SoC devices, in combination with
the CPG Module Stop (MSTP) Clocks.
properties:
compatible:
oneOf:
- const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6
- const: renesas,r8a7740-cpg-clocks # R-Mobile A1
- const: renesas,r8a7778-cpg-clocks # R-Car M1
- const: renesas,r8a7779-cpg-clocks # R-Car H1
- items:
- enum:
- renesas,r7s72100-cpg-clocks # RZ/A1H
- const: renesas,rz-cpg-clocks # RZ/A1
- const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5
reg:
maxItems: 1
clocks: true
'#clock-cells':
const: 1
clock-output-names: true
renesas,mode:
description: Board-specific settings of the MD_CK* bits on R-Mobile A1
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
'#power-domain-cells':
const: 0
required:
- compatible
- reg
- clocks
- '#clock-cells'
- clock-output-names
allOf:
- if:
properties:
compatible:
contains:
const: renesas,r8a73a4-cpg-clocks
then:
properties:
clocks:
items:
- description: extal1
- description: extal2
clock-output-names:
items:
- const: main
- const: pll0
- const: pll1
- const: pll2
- const: pll2s
- const: pll2h
- const: z
- const: z2
- const: i
- const: m3
- const: b
- const: m1
- const: m2
- const: zx
- const: zs
- const: hp
- if:
properties:
compatible:
contains:
const: renesas,r8a7740-cpg-clocks
then:
properties:
clocks:
items:
- description: extal1
- description: extal2
- description: extalr
clock-output-names:
items:
- const: system
- const: pllc0
- const: pllc1
- const: pllc2
- const: r
- const: usb24s
- const: i
- const: zg
- const: b
- const: m1
- const: hp
- const: hpp
- const: usbp
- const: s
- const: zb
- const: m3
- const: cp
required:
- renesas,mode
- if:
properties:
compatible:
contains:
const: renesas,r8a7778-cpg-clocks
then:
properties:
clocks:
maxItems: 1
clock-output-names:
items:
- const: plla
- const: pllb
- const: b
- const: out
- const: p
- const: s
- const: s1
- if:
properties:
compatible:
contains:
const: renesas,r8a7779-cpg-clocks
then:
properties:
clocks:
maxItems: 1
clock-output-names:
items:
- const: plla
- const: z
- const: zs
- const: s
- const: s1
- const: p
- const: b
- const: out
- if:
properties:
compatible:
contains:
const: renesas,r7s72100-cpg-clocks
then:
properties:
clocks:
items:
- description: extal1
- description: usb_x1
clock-output-names:
items:
- const: pll
- const: i
- const: g
- if:
properties:
compatible:
contains:
const: renesas,sh73a0-cpg-clocks
then:
properties:
clocks:
items:
- description: extal1
- description: extal2
clock-output-names:
items:
- const: main
- const: pll0
- const: pll1
- const: pll2
- const: pll3
- const: dsi0phy
- const: dsi1phy
- const: zg
- const: m3
- const: b
- const: m1
- const: m2
- const: z
- const: zx
- const: hp
- if:
properties:
compatible:
contains:
enum:
- renesas,r8a7778-cpg-clocks
- renesas,r8a7779-cpg-clocks
- renesas,rz-cpg-clocks
then:
required:
- '#power-domain-cells'
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/r8a7740-clock.h>
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7740-cpg-clocks";
reg = <0xe6150000 0x10000>;
clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
#clock-cells = <1>;
clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r",
"usb24s", "i", "zg", "b", "m1", "hp", "hpp",
"usbp", "s", "zb", "m3", "cp";
renesas,mode = <0x05>;
};
......@@ -33,6 +33,7 @@ properties:
- renesas,r8a774a1-cpg-mssr # RZ/G2M
- renesas,r8a774b1-cpg-mssr # RZ/G2N
- renesas,r8a774c0-cpg-mssr # RZ/G2E
- renesas,r8a774e1-cpg-mssr # RZ/G2H
- renesas,r8a7790-cpg-mssr # R-Car H2
- renesas,r8a7791-cpg-mssr # R-Car M2-W
- renesas,r8a7792-cpg-mssr # R-Car V2H
......
* Renesas R8A73A4 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A73A4 SoC. It includes five PLLs
and several fixed ratio dividers.
Required Properties:
- compatible: Must be "renesas,r8a73a4-cpg-clocks"
- reg: Base address and length of the memory resource used by the CPG
- clocks: Reference to the parent clocks ("extal1" and "extal2")
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "main",
"pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b",
"m1", "m2", "zx", "zs", and "hp".
Example
-------
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a73a4-cpg-clocks";
reg = <0 0xe6150000 0 0x10000>;
clocks = <&extal1_clk>, <&extal2_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0", "pll1", "pll2",
"pll2s", "pll2h", "z", "z2",
"i", "m3", "b", "m1", "m2",
"zx", "zs", "hp";
};
These bindings should be considered EXPERIMENTAL for now.
* Renesas R8A7740 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A7740 SoC. It includes three PLLs
and several fixed ratio and variable ratio dividers.
Required Properties:
- compatible: Must be "renesas,r8a7740-cpg-clocks"
- reg: Base address and length of the memory resource used by the CPG
- clocks: Reference to the three parent clocks
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are
"system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b",
"m1", "hp", "hpp", "usbp", "s", "zb", "m3", and "cp".
- renesas,mode: board-specific settings of the MD_CK* bits
Example
-------
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7740-cpg-clocks";
reg = <0xe6150000 0x10000>;
clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
#clock-cells = <1>;
clock-output-names = "system", "pllc0", "pllc1",
"pllc2", "r",
"usb24s",
"i", "zg", "b", "m1", "hp",
"hpp", "usbp", "s", "zb", "m3",
"cp";
};
&cpg_clocks {
renesas,mode = <0x05>;
};
* Renesas R8A7778 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A7778. It includes two PLLs and
several fixed ratio dividers.
The CPG also provides a Clock Domain for SoC devices, in combination with the
CPG Module Stop (MSTP) Clocks.
Required Properties:
- compatible: Must be "renesas,r8a7778-cpg-clocks"
- reg: Base address and length of the memory resource used by the CPG
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are
"plla", "pllb", "b", "out", "p", "s", and "s1".
- #power-domain-cells: Must be 0
SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
through an MSTP clock should refer to the CPG device node in their
"power-domains" property, as documented by the generic PM domain bindings in
Documentation/devicetree/bindings/power/power_domain.txt.
Examples
--------
- CPG device node:
cpg_clocks: cpg_clocks@ffc80000 {
compatible = "renesas,r8a7778-cpg-clocks";
reg = <0xffc80000 0x80>;
#clock-cells = <1>;
clocks = <&extal_clk>;
clock-output-names = "plla", "pllb", "b",
"out", "p", "s", "s1";
#power-domain-cells = <0>;
};
- CPG/MSTP Clock Domain member device node:
sdhi0: sd@ffe4c000 {
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4c000 0x100>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
power-domains = <&cpg_clocks>;
};
* Renesas R8A7779 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A7779. It includes one PLL and
several fixed ratio dividers.
The CPG also provides a Clock Domain for SoC devices, in combination with the
CPG Module Stop (MSTP) Clocks.
Required Properties:
- compatible: Must be "renesas,r8a7779-cpg-clocks"
- reg: Base address and length of the memory resource used by the CPG
- clocks: Reference to the parent clock
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "plla",
"z", "zs", "s", "s1", "p", "b", "out".
- #power-domain-cells: Must be 0
SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
through an MSTP clock should refer to the CPG device node in their
"power-domains" property, as documented by the generic PM domain bindings in
Documentation/devicetree/bindings/power/power_domain.txt.
Examples
--------
- CPG device node:
cpg_clocks: cpg_clocks@ffc80000 {
compatible = "renesas,r8a7779-cpg-clocks";
reg = <0xffc80000 0x30>;
clocks = <&extal_clk>;
#clock-cells = <1>;
clock-output-names = "plla", "z", "zs", "s", "s1", "p",
"b", "out";
#power-domain-cells = <0>;
};
- CPG/MSTP Clock Domain member device node:
sata: sata@fc600000 {
compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
power-domains = <&cpg_clocks>;
};
* Renesas RZ/A1 Clock Pulse Generator (CPG)
The CPG generates core clocks for the RZ/A1 SoCs. It includes the PLL, variable
CPU and GPU clocks, and several fixed ratio dividers.
The CPG also provides a Clock Domain for SoC devices, in combination with the
CPG Module Stop (MSTP) Clocks.
Required Properties:
- compatible: Must be one of
- "renesas,r7s72100-cpg-clocks" for the r7s72100 CPG
and "renesas,rz-cpg-clocks" as a fallback.
- reg: Base address and length of the memory resource used by the CPG
- clocks: References to possible parent clocks. Order must match clock modes
in the datasheet. For the r7s72100, this is extal, usb_x1.
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "pll",
"i", and "g"
- #power-domain-cells: Must be 0
SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
through an MSTP clock should refer to the CPG device node in their
"power-domains" property, as documented by the generic PM domain bindings in
Documentation/devicetree/bindings/power/power_domain.txt.
Examples
--------
- CPG device node:
cpg_clocks: cpg_clocks@fcfe0000 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-cpg-clocks",
"renesas,rz-cpg-clocks";
reg = <0xfcfe0000 0x18>;
clocks = <&extal_clk>, <&usb_x1_clk>;
clock-output-names = "pll", "i", "g";
#power-domain-cells = <0>;
};
- CPG/MSTP Clock Domain member device node:
mtu2: timer@fcff0000 {
compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
reg = <0xfcff0000 0x400>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tgi0a";
clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
};
These bindings should be considered EXPERIMENTAL for now.
* Renesas SH73A0 Clock Pulse Generator (CPG)
The CPG generates core clocks for the SH73A0 SoC. It includes four PLLs
and several fixed ratio dividers.
Required Properties:
- compatible: Must be "renesas,sh73a0-cpg-clocks"
- reg: Base address and length of the memory resource used by the CPG
- clocks: Reference to the parent clocks ("extal1" and "extal2")
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "main",
"pll0", "pll1", "pll2", "pll3", "dsi0phy", "dsi1phy", "zg", "m3", "b",
"m1", "m2", "z", "zx", and "hp".
Example
-------
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,sh73a0-cpg-clocks";
reg = <0 0xe6150000 0 0x10000>;
clocks = <&extal1_clk>, <&extal2_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0", "pll1", "pll2",
"pll3", "dsi0phy", "dsi1phy",
"zg", "m3", "b", "m1", "m2",
"z", "zx", "hp";
};
......@@ -6,7 +6,7 @@ found in the datasheet[2].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Si514 datasheet
http://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
https://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
Required properties:
- compatible: Shall be "silabs,si514"
......
......@@ -2,7 +2,7 @@ Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
Reference
[1] Si5351A/B/C Data Sheet
http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
The Si5351a/b/c are programmable i2c clock generators with up to 8 output
clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
......
......@@ -7,9 +7,9 @@ found in the data sheets[2][3].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Si570/571 Data Sheet
http://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
https://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
[3] Si598/599 Data Sheet
http://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
https://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
Required properties:
- compatible: Shall be one of "silabs,si570", "silabs,si571",
......
Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
synthesizer/multiplier/divider.
Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf
I2C device node required properties:
- compatible: shall be "ti,cdce706".
......
......@@ -4,10 +4,10 @@ Reference
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] http://www.ti.com/product/cdce913
[3] http://www.ti.com/product/cdce925
[4] http://www.ti.com/product/cdce937
[5] http://www.ti.com/product/cdce949
[2] https://www.ti.com/product/cdce913
[3] https://www.ti.com/product/cdce925
[4] https://www.ti.com/product/cdce937
[5] https://www.ti.com/product/cdce949
The driver provides clock sources for each output Y1 through Y5.
......
......@@ -121,7 +121,6 @@ config COMMON_CLK_SI5351
tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C
select REGMAP_I2C
select RATIONAL
help
This driver supports Silicon Labs 5351A/B/C programmable clock
generators.
......@@ -163,7 +162,6 @@ config COMMON_CLK_CDCE706
tristate "Clock driver for TI CDCE706 clock synthesizer"
depends on I2C
select REGMAP_I2C
select RATIONAL
help
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
......
# SPDX-License-Identifier: GPL-2.0-only
config CLK_BCM2711_DVP
tristate "Broadcom BCM2711 DVP support"
depends on ARCH_BCM2835 ||COMPILE_TEST
depends on COMMON_CLK
default ARCH_BCM2835
select RESET_SIMPLE
help
Enable common clock framework support for the Broadcom BCM2711
DVP Controller.
config CLK_BCM2835
bool "Broadcom BCM2835 clock support"
depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
......
......@@ -6,6 +6,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
obj-$(CONFIG_CLK_BCM2711_DVP) += clk-bcm2711-dvp.o
obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835-aux.o
obj-$(CONFIG_CLK_RASPBERRYPI) += clk-raspberrypi.o
......
// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright 2020 Cerno
#include <linux/clk-provider.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/reset/reset-simple.h>
#define DVP_HT_RPI_SW_INIT 0x04
#define DVP_HT_RPI_MISC_CONFIG 0x08
#define NR_CLOCKS 2
#define NR_RESETS 6
struct clk_dvp {
struct clk_hw_onecell_data *data;
struct reset_simple_data reset;
};
static const struct clk_parent_data clk_dvp_parent = {
.index = 0,
};
static int clk_dvp_probe(struct platform_device *pdev)
{
struct clk_hw_onecell_data *data;
struct resource *res;
struct clk_dvp *dvp;
void __iomem *base;
int ret;
dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL);
if (!dvp)
return -ENOMEM;
platform_set_drvdata(pdev, dvp);
dvp->data = devm_kzalloc(&pdev->dev,
struct_size(dvp->data, hws, NR_CLOCKS),
GFP_KERNEL);
if (!dvp->data)
return -ENOMEM;
data = dvp->data;
base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(base))
return PTR_ERR(base);
dvp->reset.rcdev.owner = THIS_MODULE;
dvp->reset.rcdev.nr_resets = NR_RESETS;
dvp->reset.rcdev.ops = &reset_simple_ops;
dvp->reset.rcdev.of_node = pdev->dev.of_node;
dvp->reset.membase = base + DVP_HT_RPI_SW_INIT;
spin_lock_init(&dvp->reset.lock);
ret = devm_reset_controller_register(&pdev->dev, &dvp->reset.rcdev);
if (ret)
return ret;
data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev,
"hdmi0-108MHz",
&clk_dvp_parent, 0,
base + DVP_HT_RPI_MISC_CONFIG, 3,
CLK_GATE_SET_TO_DISABLE,
&dvp->reset.lock);
if (IS_ERR(data->hws[0]))
return PTR_ERR(data->hws[0]);
data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev,
"hdmi1-108MHz",
&clk_dvp_parent, 0,
base + DVP_HT_RPI_MISC_CONFIG, 4,
CLK_GATE_SET_TO_DISABLE,
&dvp->reset.lock);
if (IS_ERR(data->hws[1])) {
ret = PTR_ERR(data->hws[1]);
goto unregister_clk0;
}
data->num = NR_CLOCKS;
ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
data);
if (ret)
goto unregister_clk1;
return 0;
unregister_clk1:
clk_hw_unregister_gate(data->hws[1]);
unregister_clk0:
clk_hw_unregister_gate(data->hws[0]);
return ret;
};
static int clk_dvp_remove(struct platform_device *pdev)
{
struct clk_dvp *dvp = platform_get_drvdata(pdev);
struct clk_hw_onecell_data *data = dvp->data;
clk_hw_unregister_gate(data->hws[1]);
clk_hw_unregister_gate(data->hws[0]);
return 0;
}
static const struct of_device_id clk_dvp_dt_ids[] = {
{ .compatible = "brcm,brcm2711-dvp", },
{ /* sentinel */ }
};
static struct platform_driver clk_dvp_driver = {
.probe = clk_dvp_probe,
.remove = clk_dvp_remove,
.driver = {
.name = "brcm2711-dvp",
.of_match_table = clk_dvp_dt_ids,
},
};
module_platform_driver(clk_dvp_driver);
MODULE_AUTHOR("Maxime Ripard <maxime@cerno.tech>");
MODULE_DESCRIPTION("BCM2711 DVP clock driver");
MODULE_LICENSE("GPL");
......@@ -421,6 +421,7 @@ struct bcm2835_pll_data {
u32 reference_enable_mask;
/* Bit in CM_LOCK to indicate when the PLL has locked. */
u32 lock_mask;
u32 flags;
const struct bcm2835_pll_ana_bits *ana;
......@@ -1310,7 +1311,7 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
init.num_parents = 1;
init.name = pll_data->name;
init.ops = &bcm2835_pll_clk_ops;
init.flags = CLK_IGNORE_UNUSED;
init.flags = pll_data->flags | CLK_IGNORE_UNUSED;
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
......@@ -1684,10 +1685,33 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
/*
* PLLB is used for the ARM's clock. Controlled by firmware, see
* clk-raspberrypi.c.
*/
/* PLLB is used for the ARM's clock. */
[BCM2835_PLLB] = REGISTER_PLL(
SOC_ALL,
.name = "pllb",
.cm_ctrl_reg = CM_PLLB,
.a2w_ctrl_reg = A2W_PLLB_CTRL,
.frac_reg = A2W_PLLB_FRAC,
.ana_reg_base = A2W_PLLB_ANA0,
.reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
.lock_mask = CM_LOCK_FLOCKB,
.ana = &bcm2835_ana_default,
.min_rate = 600000000u,
.max_rate = 3000000000u,
.max_fb_rate = BCM2835_MAX_FB_RATE,
.flags = CLK_GET_RATE_NOCACHE),
[BCM2835_PLLB_ARM] = REGISTER_PLL_DIV(
SOC_ALL,
.name = "pllb_arm",
.source_pll = "pllb",
.cm_reg = CM_PLLB,
.a2w_reg = A2W_PLLB_ARM,
.load_mask = CM_PLLB_LOADARM,
.hold_mask = CM_PLLB_HOLDARM,
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE),
/*
* PLLC is the core PLL, used to drive the core VPU clock.
......
This diff is collapsed.
This diff is collapsed.
......@@ -4,7 +4,7 @@
*
* Copyright (c) 2014 Cadence Design Systems Inc.
*
* Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
* Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf
*/
#include <linux/clk.h>
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2013 - 2014 Texas Instruments Incorporated - http://www.ti.com
* Copyright (C) 2013 - 2014 Texas Instruments Incorporated - https://www.ti.com
*
* Authors:
* Jyri Sarha <jsarha@ti.com>
......
......@@ -7,9 +7,9 @@
*
* References:
* [1] "Si5351A/B/C Data Sheet"
* http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
* https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
* [2] "Manually Generating an Si5351 Register Map"
* http://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf
* https://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf
*/
#include <linux/module.h>
......
This diff is collapsed.
......@@ -1400,6 +1400,21 @@ int __clk_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
}
EXPORT_SYMBOL_GPL(__clk_determine_rate);
/**
* clk_hw_round_rate() - round the given rate for a hw clk
* @hw: the hw clk for which we are rounding a rate
* @rate: the rate which is to be rounded
*
* Takes in a rate as input and rounds it to a rate that the clk can actually
* use.
*
* Context: prepare_lock must be held.
* For clk providers to call from within clk_ops such as .round_rate,
* .determine_rate.
*
* Return: returns rounded rate of hw clk if clk supports round_rate operation
* else returns the parent rate.
*/
unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate)
{
int ret;
......
/*
* SCI Clock driver for keystone based devices
*
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
* Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
* Tero Kristo <t-kristo@ti.com>
*
* This program is free software; you can redistribute it and/or modify
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <linux/clk-provider.h>
......
......@@ -3981,6 +3981,113 @@ static struct clk_regmap g12a_spicc1_sclk = {
},
};
/* Neural Network Accelerator source clock */
static const struct clk_parent_data nna_clk_parent_data[] = {
{ .fw_name = "xtal", },
{ .hw = &g12a_gp0_pll.hw, },
{ .hw = &g12a_hifi_pll.hw, },
{ .hw = &g12a_fclk_div2p5.hw, },
{ .hw = &g12a_fclk_div3.hw, },
{ .hw = &g12a_fclk_div4.hw, },
{ .hw = &g12a_fclk_div5.hw, },
{ .hw = &g12a_fclk_div7.hw },
};
static struct clk_regmap sm1_nna_axi_clk_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_NNA_CLK_CNTL,
.mask = 7,
.shift = 9,
},
.hw.init = &(struct clk_init_data){
.name = "nna_axi_clk_sel",
.ops = &clk_regmap_mux_ops,
.parent_data = nna_clk_parent_data,
.num_parents = ARRAY_SIZE(nna_clk_parent_data),
},
};
static struct clk_regmap sm1_nna_axi_clk_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_NNA_CLK_CNTL,
.shift = 0,
.width = 7,
},
.hw.init = &(struct clk_init_data){
.name = "nna_axi_clk_div",
.ops = &clk_regmap_divider_ops,
.parent_hws = (const struct clk_hw *[]) {
&sm1_nna_axi_clk_sel.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap sm1_nna_axi_clk = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_NNA_CLK_CNTL,
.bit_idx = 8,
},
.hw.init = &(struct clk_init_data){
.name = "nna_axi_clk",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&sm1_nna_axi_clk_div.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap sm1_nna_core_clk_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_NNA_CLK_CNTL,
.mask = 7,
.shift = 25,
},
.hw.init = &(struct clk_init_data){
.name = "nna_core_clk_sel",
.ops = &clk_regmap_mux_ops,
.parent_data = nna_clk_parent_data,
.num_parents = ARRAY_SIZE(nna_clk_parent_data),
},
};
static struct clk_regmap sm1_nna_core_clk_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_NNA_CLK_CNTL,
.shift = 16,
.width = 7,
},
.hw.init = &(struct clk_init_data){
.name = "nna_core_clk_div",
.ops = &clk_regmap_divider_ops,
.parent_hws = (const struct clk_hw *[]) {
&sm1_nna_core_clk_sel.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap sm1_nna_core_clk = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_NNA_CLK_CNTL,
.bit_idx = 24,
},
.hw.init = &(struct clk_init_data){
.name = "nna_core_clk",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&sm1_nna_core_clk_div.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
#define MESON_GATE(_name, _reg, _bit) \
MESON_PCLK(_name, _reg, _bit, &g12a_clk81.hw)
......@@ -4779,6 +4886,12 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
[CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
[CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
[CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
[CLKID_NNA_AXI_CLK_SEL] = &sm1_nna_axi_clk_sel.hw,
[CLKID_NNA_AXI_CLK_DIV] = &sm1_nna_axi_clk_div.hw,
[CLKID_NNA_AXI_CLK] = &sm1_nna_axi_clk.hw,
[CLKID_NNA_CORE_CLK_SEL] = &sm1_nna_core_clk_sel.hw,
[CLKID_NNA_CORE_CLK_DIV] = &sm1_nna_core_clk_div.hw,
[CLKID_NNA_CORE_CLK] = &sm1_nna_core_clk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
......@@ -5020,6 +5133,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_spicc1_sclk_sel,
&g12a_spicc1_sclk_div,
&g12a_spicc1_sclk,
&sm1_nna_axi_clk_sel,
&sm1_nna_axi_clk_div,
&sm1_nna_axi_clk,
&sm1_nna_core_clk_sel,
&sm1_nna_core_clk_div,
&sm1_nna_core_clk,
};
static const struct reg_sequence g12a_init_regs[] = {
......
......@@ -70,6 +70,7 @@
#define HHI_MALI_CLK_CNTL 0x1b0
#define HHI_VPU_CLKC_CNTL 0x1b4
#define HHI_VPU_CLK_CNTL 0x1bC
#define HHI_NNA_CLK_CNTL 0x1C8
#define HHI_HDMI_CLK_CNTL 0x1CC
#define HHI_VDEC_CLK_CNTL 0x1E0
#define HHI_VDEC2_CLK_CNTL 0x1E4
......@@ -259,8 +260,12 @@
#define CLKID_SPICC0_SCLK_DIV 257
#define CLKID_SPICC1_SCLK_SEL 259
#define CLKID_SPICC1_SCLK_DIV 260
#define CLKID_NNA_AXI_CLK_SEL 262
#define CLKID_NNA_AXI_CLK_DIV 263
#define CLKID_NNA_CORE_CLK_SEL 265
#define CLKID_NNA_CORE_CLK_DIV 266
#define NR_CLKS 262
#define NR_CLKS 268
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
......
......@@ -293,13 +293,6 @@ static struct clk_regmap meson8b_fclk_div2 = {
&meson8b_fclk_div2_div.hw
},
.num_parents = 1,
/*
* FIXME: Ethernet with a RGMII PHYs is not working if
* fclk_div2 is disabled. it is currently unclear why this
* is. keep it enabled until the Ethernet driver knows how
* to manage this clock.
*/
.flags = CLK_IS_CRITICAL,
},
};
......@@ -1211,6 +1204,22 @@ static struct clk_regmap meson8b_vclk_in_en = {
},
};
static struct clk_regmap meson8b_vclk_en = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_VID_CLK_CNTL,
.bit_idx = 19,
},
.hw.init = &(struct clk_init_data){
.name = "vclk_en",
.ops = &clk_regmap_gate_ro_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk_in_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_vclk_div1_gate = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_VID_CLK_CNTL,
......@@ -1220,7 +1229,7 @@ static struct clk_regmap meson8b_vclk_div1_gate = {
.name = "vclk_div1_en",
.ops = &clk_regmap_gate_ro_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk_in_en.hw
&meson8b_vclk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
......@@ -1234,7 +1243,7 @@ static struct clk_fixed_factor meson8b_vclk_div2_div = {
.name = "vclk_div2",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk_in_en.hw
&meson8b_vclk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
......@@ -1264,7 +1273,7 @@ static struct clk_fixed_factor meson8b_vclk_div4_div = {
.name = "vclk_div4",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk_in_en.hw
&meson8b_vclk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
......@@ -1294,7 +1303,7 @@ static struct clk_fixed_factor meson8b_vclk_div6_div = {
.name = "vclk_div6",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk_in_en.hw
&meson8b_vclk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
......@@ -1324,7 +1333,7 @@ static struct clk_fixed_factor meson8b_vclk_div12_div = {
.name = "vclk_div12",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk_in_en.hw
&meson8b_vclk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
......@@ -1378,6 +1387,22 @@ static struct clk_regmap meson8b_vclk2_clk_in_en = {
},
};
static struct clk_regmap meson8b_vclk2_clk_en = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_VIID_CLK_DIV,
.bit_idx = 19,
},
.hw.init = &(struct clk_init_data){
.name = "vclk2_en",
.ops = &clk_regmap_gate_ro_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk2_clk_in_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap meson8b_vclk2_div1_gate = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_VIID_CLK_DIV,
......@@ -1387,7 +1412,7 @@ static struct clk_regmap meson8b_vclk2_div1_gate = {
.name = "vclk2_div1_en",
.ops = &clk_regmap_gate_ro_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk2_clk_in_en.hw
&meson8b_vclk2_clk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
......@@ -1401,7 +1426,7 @@ static struct clk_fixed_factor meson8b_vclk2_div2_div = {
.name = "vclk2_div2",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk2_clk_in_en.hw
&meson8b_vclk2_clk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
......@@ -1431,7 +1456,7 @@ static struct clk_fixed_factor meson8b_vclk2_div4_div = {
.name = "vclk2_div4",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk2_clk_in_en.hw
&meson8b_vclk2_clk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
......@@ -1461,7 +1486,7 @@ static struct clk_fixed_factor meson8b_vclk2_div6_div = {
.name = "vclk2_div6",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk2_clk_in_en.hw
&meson8b_vclk2_clk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
......@@ -1491,7 +1516,7 @@ static struct clk_fixed_factor meson8b_vclk2_div12_div = {
.name = "vclk2_div12",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8b_vclk2_clk_in_en.hw
&meson8b_vclk2_clk_en.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
......@@ -2827,6 +2852,7 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = {
[CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw,
[CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw,
[CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw,
[CLKID_VCLK_EN] = &meson8b_vclk_en.hw,
[CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw,
[CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw,
[CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw,
......@@ -2838,6 +2864,7 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = {
[CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw,
[CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw,
[CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw,
[CLKID_VCLK2_EN] = &meson8b_vclk2_clk_en.hw,
[CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw,
[CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw,
[CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw,
......@@ -3032,6 +3059,7 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
[CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw,
[CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw,
[CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw,
[CLKID_VCLK_EN] = &meson8b_vclk_en.hw,
[CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw,
[CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw,
[CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw,
......@@ -3043,6 +3071,7 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
[CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw,
[CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw,
[CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw,
[CLKID_VCLK2_EN] = &meson8b_vclk2_clk_en.hw,
[CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw,
[CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw,
[CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw,
......@@ -3248,6 +3277,7 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
[CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw,
[CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw,
[CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw,
[CLKID_VCLK_EN] = &meson8b_vclk_en.hw,
[CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw,
[CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw,
[CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw,
......@@ -3259,6 +3289,7 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
[CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw,
[CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw,
[CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw,
[CLKID_VCLK2_EN] = &meson8b_vclk2_clk_en.hw,
[CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw,
[CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw,
[CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw,
......@@ -3450,6 +3481,7 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_vid_pll_final_div,
&meson8b_vclk_in_sel,
&meson8b_vclk_in_en,
&meson8b_vclk_en,
&meson8b_vclk_div1_gate,
&meson8b_vclk_div2_div_gate,
&meson8b_vclk_div4_div_gate,
......@@ -3457,6 +3489,7 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_vclk_div12_div_gate,
&meson8b_vclk2_in_sel,
&meson8b_vclk2_clk_in_en,
&meson8b_vclk2_clk_en,
&meson8b_vclk2_div1_gate,
&meson8b_vclk2_div2_div_gate,
&meson8b_vclk2_div4_div_gate,
......
......@@ -17,7 +17,7 @@
* blocks below. Those offsets must be multiplied by 4 before adding them to
* the base address to get the right value
*
* [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
* [0] https://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
*/
#define HHI_GP_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
#define HHI_GP_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
......@@ -180,8 +180,10 @@
#define CLKID_CTS_AMCLK_DIV 208
#define CLKID_CTS_MCLK_I958_SEL 210
#define CLKID_CTS_MCLK_I958_DIV 211
#define CLKID_VCLK_EN 214
#define CLKID_VCLK2_EN 215
#define CLK_NR_CLKS 214
#define CLK_NR_CLKS 216
/*
* include the CLKID and RESETID that have
......
......@@ -37,6 +37,15 @@ config QCOM_CLK_APCS_MSM8916
Say Y if you want to support CPU frequency scaling on devices
such as msm8916.
config QCOM_CLK_APCC_MSM8996
tristate "MSM8996 CPU Clock Controller"
select QCOM_KRYO_L2_ACCESSORS
depends on ARM64
help
Support for the CPU clock controller on msm8996 devices.
Say Y if you want to support CPU clock scaling using CPUfreq
drivers for dyanmic power management.
config QCOM_CLK_RPM
tristate "RPM based Clock Controller"
depends on MFD_QCOM_RPM
......@@ -89,6 +98,25 @@ config APQ_MMCC_8084
Say Y if you want to support multimedia devices such as display,
graphics, video encode/decode, camera, etc.
config IPQ_APSS_PLL
tristate "IPQ APSS PLL"
help
Support for APSS PLL on ipq devices. The APSS PLL is the main
clock that feeds the CPUs on ipq based devices.
Say Y if you want to support CPU frequency scaling on ipq based
devices.
config IPQ_APSS_6018
tristate "IPQ APSS Clock Controller"
select IPQ_APSS_PLL
depends on QCOM_APCS_IPC || COMPILE_TEST
help
Support for APSS clock controller on IPQ platforms. The
APSS clock controller manages the Mux and enable block that feeds the
CPUs.
Say Y if you want to support CPU frequency scaling on
ipq based devices.
config IPQ_GCC_4019
tristate "IPQ4019 Global Clock Controller"
help
......
......@@ -19,6 +19,8 @@ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
# Keep alphabetically sorted by config
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
......@@ -42,6 +44,7 @@ obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
obj-$(CONFIG_MSM_MMCC_8998) += mmcc-msm8998.o
obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o
obj-$(CONFIG_QCOM_CLK_APCC_MSM8996) += clk-cpu-8996.o
obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
......
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, The Linux Foundation. All rights reserved.
#include <linux/clk-provider.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include "clk-alpha-pll.h"
static const u8 ipq_pll_offsets[] = {
[PLL_OFF_L_VAL] = 0x08,
[PLL_OFF_ALPHA_VAL] = 0x10,
[PLL_OFF_USER_CTL] = 0x18,
[PLL_OFF_CONFIG_CTL] = 0x20,
[PLL_OFF_CONFIG_CTL_U] = 0x24,
[PLL_OFF_STATUS] = 0x28,
[PLL_OFF_TEST_CTL] = 0x30,
[PLL_OFF_TEST_CTL_U] = 0x34,
};
static struct clk_alpha_pll ipq_pll = {
.offset = 0x0,
.regs = ipq_pll_offsets,
.flags = SUPPORTS_DYNAMIC_UPDATE,
.clkr = {
.enable_reg = 0x0,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "a53pll",
.parent_data = &(const struct clk_parent_data) {
.fw_name = "xo",
},
.num_parents = 1,
.ops = &clk_alpha_pll_huayra_ops,
},
},
};
static const struct alpha_pll_config ipq_pll_config = {
.l = 0x37,
.config_ctl_val = 0x04141200,
.config_ctl_hi_val = 0x0,
.early_output_mask = BIT(3),
.main_output_mask = BIT(0),
};
static const struct regmap_config ipq_pll_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = 0x40,
.fast_io = true,
};
static int apss_ipq_pll_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct regmap *regmap;
void __iomem *base;
int ret;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(dev, base, &ipq_pll_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
if (ret)
return ret;
return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
&ipq_pll.clkr.hw);
}
static const struct of_device_id apss_ipq_pll_match_table[] = {
{ .compatible = "qcom,ipq6018-a53pll" },
{ }
};
static struct platform_driver apss_ipq_pll_driver = {
.probe = apss_ipq_pll_probe,
.driver = {
.name = "qcom-ipq-apss-pll",
.of_match_table = apss_ipq_pll_match_table,
},
};
module_platform_driver(apss_ipq_pll_driver);
MODULE_DESCRIPTION("Qualcomm technology Inc APSS ALPHA PLL Driver");
MODULE_LICENSE("GPL v2");
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/clk-provider.h>
#include <linux/regmap.h>
#include <linux/module.h>
#include <dt-bindings/clock/qcom,apss-ipq.h>
#include "common.h"
#include "clk-regmap.h"
#include "clk-branch.h"
#include "clk-alpha-pll.h"
#include "clk-regmap-mux.h"
enum {
P_XO,
P_APSS_PLL_EARLY,
};
static const struct clk_parent_data parents_apcs_alias0_clk_src[] = {
{ .fw_name = "xo" },
{ .fw_name = "pll" },
};
static const struct parent_map parents_apcs_alias0_clk_src_map[] = {
{ P_XO, 0 },
{ P_APSS_PLL_EARLY, 5 },
};
static struct clk_regmap_mux apcs_alias0_clk_src = {
.reg = 0x0050,
.width = 3,
.shift = 7,
.parent_map = parents_apcs_alias0_clk_src_map,
.clkr.hw.init = &(struct clk_init_data){
.name = "apcs_alias0_clk_src",
.parent_data = parents_apcs_alias0_clk_src,
.num_parents = 2,
.ops = &clk_regmap_mux_closest_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_branch apcs_alias0_core_clk = {
.halt_reg = 0x0058,
.clkr = {
.enable_reg = 0x0058,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "apcs_alias0_core_clk",
.parent_hws = (const struct clk_hw *[]){
&apcs_alias0_clk_src.clkr.hw },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
};
static const struct regmap_config apss_ipq6018_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = 0x1000,
.fast_io = true,
};
static struct clk_regmap *apss_ipq6018_clks[] = {
[APCS_ALIAS0_CLK_SRC] = &apcs_alias0_clk_src.clkr,
[APCS_ALIAS0_CORE_CLK] = &apcs_alias0_core_clk.clkr,
};
static const struct qcom_cc_desc apss_ipq6018_desc = {
.config = &apss_ipq6018_regmap_config,
.clks = apss_ipq6018_clks,
.num_clks = ARRAY_SIZE(apss_ipq6018_clks),
};
static int apss_ipq6018_probe(struct platform_device *pdev)
{
struct regmap *regmap;
regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!regmap)
return -ENODEV;
return qcom_cc_really_probe(pdev, &apss_ipq6018_desc, regmap);
}
static struct platform_driver apss_ipq6018_driver = {
.probe = apss_ipq6018_probe,
.driver = {
.name = "qcom,apss-ipq6018-clk",
},
};
module_platform_driver(apss_ipq6018_driver);
MODULE_DESCRIPTION("QCOM APSS IPQ 6018 CLK Driver");
MODULE_LICENSE("GPL v2");
......@@ -47,6 +47,12 @@ struct pll_vco {
u32 val;
};
#define VCO(a, b, c) { \
.val = a,\
.min_freq = b,\
.max_freq = c,\
}
/**
* struct clk_alpha_pll - phase locked loop (PLL)
* @offset: base address of registers
......
This diff is collapsed.
This diff is collapsed.
......@@ -3089,7 +3089,7 @@ static int gcc_ipq806x_probe(struct platform_device *pdev)
regmap_write(regmap, 0x3cf8, 8);
regmap_write(regmap, 0x3d18, 8);
return 0;
return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
}
static struct platform_driver gcc_ipq806x_driver = {
......
......@@ -4316,6 +4316,62 @@ static struct clk_branch gcc_gp3_clk = {
},
};
static const struct freq_tbl ftbl_pcie_rchng_clk_src[] = {
F(19200000, P_XO, 1, 0, 0),
F(100000000, P_GPLL0, 8, 0, 0),
{ }
};
struct clk_rcg2 pcie0_rchng_clk_src = {
.cmd_rcgr = 0x75070,
.freq_tbl = ftbl_pcie_rchng_clk_src,
.hid_width = 5,
.parent_map = gcc_xo_gpll0_map,
.clkr.hw.init = &(struct clk_init_data){
.name = "pcie0_rchng_clk_src",
.parent_hws = (const struct clk_hw *[]) {
&gpll0.clkr.hw },
.num_parents = 2,
.ops = &clk_rcg2_ops,
},
};
static struct clk_branch gcc_pcie0_rchng_clk = {
.halt_reg = 0x75070,
.halt_bit = 31,
.clkr = {
.enable_reg = 0x75070,
.enable_mask = BIT(1),
.hw.init = &(struct clk_init_data){
.name = "gcc_pcie0_rchng_clk",
.parent_hws = (const struct clk_hw *[]){
&pcie0_rchng_clk_src.clkr.hw,
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch gcc_pcie0_axi_s_bridge_clk = {
.halt_reg = 0x75048,
.halt_bit = 31,
.clkr = {
.enable_reg = 0x75048,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_pcie0_axi_s_bridge_clk",
.parent_hws = (const struct clk_hw *[]){
&pcie0_axi_clk_src.clkr.hw,
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
};
static struct clk_hw *gcc_ipq8074_hws[] = {
&gpll0_out_main_div2.hw,
&gpll6_out_main_div2.hw,
......@@ -4551,6 +4607,9 @@ static struct clk_regmap *gcc_ipq8074_clks[] = {
[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
[GCC_PCIE0_RCHNG_CLK_SRC] = &pcie0_rchng_clk_src.clkr,
[GCC_PCIE0_RCHNG_CLK] = &gcc_pcie0_rchng_clk.clkr,
[GCC_PCIE0_AXI_S_BRIDGE_CLK] = &gcc_pcie0_axi_s_bridge_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq8074_resets[] = {
......@@ -4678,6 +4737,7 @@ static const struct qcom_reset_map gcc_ipq8074_resets[] = {
[GCC_PCIE0_AXI_SLAVE_ARES] = { 0x75040, 4 },
[GCC_PCIE0_AHB_ARES] = { 0x75040, 5 },
[GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 },
[GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 },
[GCC_PCIE1_PIPE_ARES] = { 0x76040, 0 },
[GCC_PCIE1_SLEEP_ARES] = { 0x76040, 1 },
[GCC_PCIE1_CORE_STICKY_ARES] = { 0x76040, 2 },
......
......@@ -1061,7 +1061,7 @@ static struct clk_branch gcc_disp_gpll0_clk_src = {
.hw = &gpll0.clkr.hw,
},
.num_parents = 1,
.ops = &clk_branch2_ops,
.ops = &clk_branch2_aon_ops,
},
},
};
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved.
*/
#include <linux/kernel.h>
......@@ -1344,7 +1344,7 @@ static struct clk_branch gcc_disp_gpll0_clk_src = {
"gpll0",
},
.num_parents = 1,
.ops = &clk_branch2_ops,
.ops = &clk_branch2_aon_ops,
},
},
};
......
......@@ -15,6 +15,7 @@ config CLK_RENESAS
select CLK_R8A774A1 if ARCH_R8A774A1
select CLK_R8A774B1 if ARCH_R8A774B1
select CLK_R8A774C0 if ARCH_R8A774C0
select CLK_R8A774E1 if ARCH_R8A774E1
select CLK_R8A7778 if ARCH_R8A7778
select CLK_R8A7779 if ARCH_R8A7779
select CLK_R8A7790 if ARCH_R8A7790
......@@ -84,6 +85,10 @@ config CLK_R8A774C0
bool "RZ/G2E clock support" if COMPILE_TEST
select CLK_RCAR_GEN3_CPG
config CLK_R8A774E1
bool "RZ/G2H clock support" if COMPILE_TEST
select CLK_RCAR_GEN3_CPG
config CLK_R8A7778
bool "R-Car M1A clock support" if COMPILE_TEST
select CLK_RENESAS_CPG_MSTP
......
......@@ -12,6 +12,7 @@ obj-$(CONFIG_CLK_R8A77470) += r8a77470-cpg-mssr.o
obj-$(CONFIG_CLK_R8A774A1) += r8a774a1-cpg-mssr.o
obj-$(CONFIG_CLK_R8A774B1) += r8a774b1-cpg-mssr.o
obj-$(CONFIG_CLK_R8A774C0) += r8a774c0-cpg-mssr.o
obj-$(CONFIG_CLK_R8A774E1) += r8a774e1-cpg-mssr.o
obj-$(CONFIG_CLK_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_CLK_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_CLK_R8A7790) += r8a7790-cpg-mssr.o
......
......@@ -237,6 +237,7 @@ static const struct mssr_mod_clk r8a774a1_mod_clks[] __initconst = {
};
static const unsigned int r8a774a1_crit_mod_clks[] __initconst = {
MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
......
......@@ -233,6 +233,7 @@ static const struct mssr_mod_clk r8a774b1_mod_clks[] __initconst = {
};
static const unsigned int r8a774b1_crit_mod_clks[] __initconst = {
MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
......
......@@ -238,6 +238,7 @@ static const struct mssr_mod_clk r8a774c0_mod_clks[] __initconst = {
};
static const unsigned int r8a774c0_crit_mod_clks[] __initconst = {
MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
......
This diff is collapsed.
......@@ -287,10 +287,10 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = {
};
static const unsigned int r8a7795_crit_mod_clks[] __initconst = {
MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
/*
* CPG Clock Data
*/
......
......@@ -262,10 +262,10 @@ static struct mssr_mod_clk r8a7796_mod_clks[] __initdata = {
};
static const unsigned int r8a7796_crit_mod_clks[] __initconst = {
MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
/*
* CPG Clock Data
*/
......
......@@ -263,6 +263,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = {
};
static const unsigned int r8a77965_crit_mod_clks[] __initconst = {
MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
......
......@@ -165,10 +165,10 @@ static const struct mssr_mod_clk r8a77970_mod_clks[] __initconst = {
};
static const unsigned int r8a77970_crit_mod_clks[] __initconst = {
MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
/*
* CPG Clock Data
*/
......
......@@ -180,10 +180,10 @@ static const struct mssr_mod_clk r8a77980_mod_clks[] __initconst = {
};
static const unsigned int r8a77980_crit_mod_clks[] __initconst = {
MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
/*
* CPG Clock Data
*/
......
......@@ -245,6 +245,7 @@ static const struct mssr_mod_clk r8a77990_mod_clks[] __initconst = {
};
static const unsigned int r8a77990_crit_mod_clks[] __initconst = {
MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
......
......@@ -183,10 +183,10 @@ static const struct mssr_mod_clk r8a77995_mod_clks[] __initconst = {
};
static const unsigned int r8a77995_crit_mod_clks[] __initconst = {
MOD_CLK_ID(402), /* RWDT */
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
/*
* CPG Clock Data
*/
......
......@@ -416,14 +416,6 @@ static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod,
init.name = mod->name;
init.ops = &cpg_mstp_clock_ops;
init.flags = CLK_SET_RATE_PARENT;
for (i = 0; i < info->num_crit_mod_clks; i++)
if (id == info->crit_mod_clks[i]) {
dev_dbg(dev, "MSTP %s setting CLK_IS_CRITICAL\n",
mod->name);
init.flags |= CLK_IS_CRITICAL;
break;
}
parent_name = __clk_get_name(parent);
init.parent_names = &parent_name;
init.num_parents = 1;
......@@ -432,6 +424,15 @@ static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod,
clock->priv = priv;
clock->hw.init = &init;
for (i = 0; i < info->num_crit_mod_clks; i++)
if (id == info->crit_mod_clks[i] &&
cpg_mstp_clock_is_enabled(&clock->hw)) {
dev_dbg(dev, "MSTP %s setting CLK_IS_CRITICAL\n",
mod->name);
init.flags |= CLK_IS_CRITICAL;
break;
}
clk = clk_register(NULL, &clock->hw);
if (IS_ERR(clk))
goto fail;
......@@ -720,6 +721,12 @@ static const struct of_device_id cpg_mssr_match[] = {
.data = &r8a774c0_cpg_mssr_info,
},
#endif
#ifdef CONFIG_CLK_R8A774E1
{
.compatible = "renesas,r8a774e1-cpg-mssr",
.data = &r8a774e1_cpg_mssr_info,
},
#endif
#ifdef CONFIG_CLK_R8A7790
{
.compatible = "renesas,r8a7790-cpg-mssr",
......
......@@ -162,6 +162,7 @@ extern const struct cpg_mssr_info r8a77470_cpg_mssr_info;
extern const struct cpg_mssr_info r8a774a1_cpg_mssr_info;
extern const struct cpg_mssr_info r8a774b1_cpg_mssr_info;
extern const struct cpg_mssr_info r8a774c0_cpg_mssr_info;
extern const struct cpg_mssr_info r8a774e1_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7790_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7791_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7792_cpg_mssr_info;
......
......@@ -252,7 +252,7 @@ static const struct stratix10_gate_clock agilex_gate_clks[] = {
0, 0, 0, 0, 0x30, 0, 0},
{ AGILEX_MPU_PERIPH_CLK, "mpu_periph_clk", "mpu_clk", NULL, 1, 0, 0x24,
0, 0, 0, 0, 0, 0, 4},
{ AGILEX_MPU_L2RAM_CLK, "mpu_l2ram_clk", "mpu_clk", NULL, 1, 0, 0x24,
{ AGILEX_MPU_CCU_CLK, "mpu_ccu_clk", "mpu_clk", NULL, 1, 0, 0x24,
0, 0, 0, 0, 0, 0, 2},
{ AGILEX_L4_MAIN_CLK, "l4_main_clk", "noc_clk", NULL, 1, 0, 0x24,
1, 0x44, 0, 2, 0, 0, 0},
......@@ -294,8 +294,12 @@ static const struct stratix10_gate_clock agilex_gate_clks[] = {
8, 0, 0, 0, 0, 0, 0},
{ AGILEX_SPI_M_CLK, "spi_m_clk", "l4_mp_clk", NULL, 1, 0, 0x7C,
9, 0, 0, 0, 0, 0, 0},
{ AGILEX_NAND_CLK, "nand_clk", "l4_main_clk", NULL, 1, 0, 0x7C,
{ AGILEX_NAND_X_CLK, "nand_x_clk", "l4_mp_clk", NULL, 1, 0, 0x7C,
10, 0, 0, 0, 0, 0, 0},
{ AGILEX_NAND_CLK, "nand_clk", "nand_x_clk", NULL, 1, 0, 0x7C,
10, 0, 0, 0, 0, 0, 4},
{ AGILEX_NAND_ECC_CLK, "nand_ecc_clk", "nand_x_clk", NULL, 1, 0, 0x7C,
10, 0, 0, 0, 0, 0, 4},
};
static int agilex_clk_register_c_perip(const struct stratix10_perip_c_clock *clks,
......
......@@ -5,7 +5,7 @@
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
*
* Support functions for calculating clocks/divisors for the ICST307
* clock generators. See http://www.idt.com/ for more information
* clock generators. See https://www.idt.com/ for more information
* on these devices.
*
* This is an almost identical implementation to the ICST525 clock generator.
......
......@@ -3,7 +3,7 @@
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
*
* Support functions for calculating clocks/divisors for the ICST
* clock generators. See http://www.idt.com/ for more information
* clock generators. See https://www.idt.com/ for more information
* on these devices.
*/
#ifndef ICST_H
......
......@@ -211,6 +211,20 @@ rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw)
static void rpi_register_clk_driver(struct device *dev)
{
struct device_node *firmware;
/*
* Earlier DTs don't have a node for the firmware clocks but
* rely on us creating a platform device by hand. If we do
* have a node for the firmware clocks, just bail out here.
*/
firmware = of_get_compatible_child(dev->of_node,
"raspberrypi,firmware-clocks");
if (firmware) {
of_node_put(firmware);
return;
}
rpi_clk = platform_device_register_data(dev, "raspberrypi-clk",
-1, NULL, 0);
}
......
......@@ -82,6 +82,7 @@ config FSL_IMX8_DDR_PMU
config QCOM_L2_PMU
bool "Qualcomm Technologies L2-cache PMU"
depends on ARCH_QCOM && ARM64 && ACPI
select QCOM_KRYO_L2_ACCESSORS
help
Provides support for the L2 cache performance monitor unit (PMU)
in Qualcomm Technologies processors.
......
......@@ -23,6 +23,7 @@
#include <asm/barrier.h>
#include <asm/local64.h>
#include <asm/sysreg.h>
#include <soc/qcom/kryo-l2-accessors.h>
#define MAX_L2_CTRS 9
......@@ -79,8 +80,6 @@
#define L2_COUNTER_RELOAD BIT_ULL(31)
#define L2_CYCLE_COUNTER_RELOAD BIT_ULL(63)
#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6)
#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7)
#define reg_idx(reg, i) (((i) * IA_L2_REG_OFFSET) + reg##_BASE)
......@@ -99,48 +98,7 @@
#define L2_EVENT_STREX 0x421
#define L2_EVENT_CLREX 0x422
static DEFINE_RAW_SPINLOCK(l2_access_lock);
/**
* set_l2_indirect_reg: write value to an L2 register
* @reg: Address of L2 register.
* @value: Value to be written to register.
*
* Use architecturally required barriers for ordering between system register
* accesses
*/
static void set_l2_indirect_reg(u64 reg, u64 val)
{
unsigned long flags;
raw_spin_lock_irqsave(&l2_access_lock, flags);
write_sysreg_s(reg, L2CPUSRSELR_EL1);
isb();
write_sysreg_s(val, L2CPUSRDR_EL1);
isb();
raw_spin_unlock_irqrestore(&l2_access_lock, flags);
}
/**
* get_l2_indirect_reg: read an L2 register value
* @reg: Address of L2 register.
*
* Use architecturally required barriers for ordering between system register
* accesses
*/
static u64 get_l2_indirect_reg(u64 reg)
{
u64 val;
unsigned long flags;
raw_spin_lock_irqsave(&l2_access_lock, flags);
write_sysreg_s(reg, L2CPUSRSELR_EL1);
isb();
val = read_sysreg_s(L2CPUSRDR_EL1);
raw_spin_unlock_irqrestore(&l2_access_lock, flags);
return val;
}
struct cluster_pmu;
......@@ -211,28 +169,28 @@ static inline struct cluster_pmu *get_cluster_pmu(
static void cluster_pmu_reset(void)
{
/* Reset all counters */
set_l2_indirect_reg(L2PMCR, L2PMCR_RESET_ALL);
set_l2_indirect_reg(L2PMCNTENCLR, l2_counter_present_mask);
set_l2_indirect_reg(L2PMINTENCLR, l2_counter_present_mask);
set_l2_indirect_reg(L2PMOVSCLR, l2_counter_present_mask);
kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_RESET_ALL);
kryo_l2_set_indirect_reg(L2PMCNTENCLR, l2_counter_present_mask);
kryo_l2_set_indirect_reg(L2PMINTENCLR, l2_counter_present_mask);
kryo_l2_set_indirect_reg(L2PMOVSCLR, l2_counter_present_mask);
}
static inline void cluster_pmu_enable(void)
{
set_l2_indirect_reg(L2PMCR, L2PMCR_COUNTERS_ENABLE);
kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_COUNTERS_ENABLE);
}
static inline void cluster_pmu_disable(void)
{
set_l2_indirect_reg(L2PMCR, L2PMCR_COUNTERS_DISABLE);
kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_COUNTERS_DISABLE);
}
static inline void cluster_pmu_counter_set_value(u32 idx, u64 value)
{
if (idx == l2_cycle_ctr_idx)
set_l2_indirect_reg(L2PMCCNTR, value);
kryo_l2_set_indirect_reg(L2PMCCNTR, value);
else
set_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx), value);
kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx), value);
}
static inline u64 cluster_pmu_counter_get_value(u32 idx)
......@@ -240,46 +198,46 @@ static inline u64 cluster_pmu_counter_get_value(u32 idx)
u64 value;
if (idx == l2_cycle_ctr_idx)
value = get_l2_indirect_reg(L2PMCCNTR);
value = kryo_l2_get_indirect_reg(L2PMCCNTR);
else
value = get_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx));
value = kryo_l2_get_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx));
return value;
}
static inline void cluster_pmu_counter_enable(u32 idx)
{
set_l2_indirect_reg(L2PMCNTENSET, idx_to_reg_bit(idx));
kryo_l2_set_indirect_reg(L2PMCNTENSET, idx_to_reg_bit(idx));
}
static inline void cluster_pmu_counter_disable(u32 idx)
{
set_l2_indirect_reg(L2PMCNTENCLR, idx_to_reg_bit(idx));
kryo_l2_set_indirect_reg(L2PMCNTENCLR, idx_to_reg_bit(idx));
}
static inline void cluster_pmu_counter_enable_interrupt(u32 idx)
{
set_l2_indirect_reg(L2PMINTENSET, idx_to_reg_bit(idx));
kryo_l2_set_indirect_reg(L2PMINTENSET, idx_to_reg_bit(idx));
}
static inline void cluster_pmu_counter_disable_interrupt(u32 idx)
{
set_l2_indirect_reg(L2PMINTENCLR, idx_to_reg_bit(idx));
kryo_l2_set_indirect_reg(L2PMINTENCLR, idx_to_reg_bit(idx));
}
static inline void cluster_pmu_set_evccntcr(u32 val)
{
set_l2_indirect_reg(L2PMCCNTCR, val);
kryo_l2_set_indirect_reg(L2PMCCNTCR, val);
}
static inline void cluster_pmu_set_evcntcr(u32 ctr, u32 val)
{
set_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTCR, ctr), val);
kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVCNTCR, ctr), val);
}
static inline void cluster_pmu_set_evtyper(u32 ctr, u32 val)
{
set_l2_indirect_reg(reg_idx(IA_L2PMXEVTYPER, ctr), val);
kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVTYPER, ctr), val);
}
static void cluster_pmu_set_resr(struct cluster_pmu *cluster,
......@@ -295,11 +253,11 @@ static void cluster_pmu_set_resr(struct cluster_pmu *cluster,
spin_lock_irqsave(&cluster->pmu_lock, flags);
resr_val = get_l2_indirect_reg(L2PMRESR);
resr_val = kryo_l2_get_indirect_reg(L2PMRESR);
resr_val &= ~(L2PMRESR_GROUP_MASK << shift);
resr_val |= field;
resr_val |= L2PMRESR_EN;
set_l2_indirect_reg(L2PMRESR, resr_val);
kryo_l2_set_indirect_reg(L2PMRESR, resr_val);
spin_unlock_irqrestore(&cluster->pmu_lock, flags);
}
......@@ -315,14 +273,14 @@ static inline void cluster_pmu_set_evfilter_sys_mode(u32 ctr)
L2PMXEVFILTER_ORGFILTER_IDINDEP |
L2PMXEVFILTER_ORGFILTER_ALL;
set_l2_indirect_reg(reg_idx(IA_L2PMXEVFILTER, ctr), val);
kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVFILTER, ctr), val);
}
static inline u32 cluster_pmu_getreset_ovsr(void)
{
u32 result = get_l2_indirect_reg(L2PMOVSSET);
u32 result = kryo_l2_get_indirect_reg(L2PMOVSSET);
set_l2_indirect_reg(L2PMOVSCLR, result);
kryo_l2_set_indirect_reg(L2PMOVSCLR, result);
return result;
}
......@@ -767,7 +725,7 @@ static int get_num_counters(void)
{
int val;
val = get_l2_indirect_reg(L2PMCR);
val = kryo_l2_get_indirect_reg(L2PMCR);
/*
* Read number of counters from L2PMCR and add 1
......
......@@ -53,6 +53,10 @@ config QCOM_LLCC
SDM845. This provides interfaces to clients that use the LLCC.
Say yes here to enable LLCC slice driver.
config QCOM_KRYO_L2_ACCESSORS
bool
depends on ARCH_QCOM && ARM64 || COMPILE_TEST
config QCOM_MDT_LOADER
tristate
select QCOM_SCM
......
......@@ -24,3 +24,4 @@ obj-$(CONFIG_QCOM_APR) += apr.o
obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
#include <linux/spinlock.h>
#include <asm/barrier.h>
#include <asm/sysreg.h>
#include <soc/qcom/kryo-l2-accessors.h>
#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6)
#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7)
static DEFINE_RAW_SPINLOCK(l2_access_lock);
/**
* kryo_l2_set_indirect_reg() - write value to an L2 register
* @reg: Address of L2 register.
* @value: Value to be written to register.
*
* Use architecturally required barriers for ordering between system register
* accesses, and system registers with respect to device memory
*/
void kryo_l2_set_indirect_reg(u64 reg, u64 val)
{
unsigned long flags;
raw_spin_lock_irqsave(&l2_access_lock, flags);
write_sysreg_s(reg, L2CPUSRSELR_EL1);
isb();
write_sysreg_s(val, L2CPUSRDR_EL1);
isb();
raw_spin_unlock_irqrestore(&l2_access_lock, flags);
}
EXPORT_SYMBOL(kryo_l2_set_indirect_reg);
/**
* kryo_l2_get_indirect_reg() - read an L2 register value
* @reg: Address of L2 register.
*
* Use architecturally required barriers for ordering between system register
* accesses, and system registers with respect to device memory
*/
u64 kryo_l2_get_indirect_reg(u64 reg)
{
u64 val;
unsigned long flags;
raw_spin_lock_irqsave(&l2_access_lock, flags);
write_sysreg_s(reg, L2CPUSRSELR_EL1);
isb();
val = read_sysreg_s(L2CPUSRDR_EL1);
raw_spin_unlock_irqrestore(&l2_access_lock, flags);
return val;
}
EXPORT_SYMBOL(kryo_l2_get_indirect_reg);
/* SPDX-License-Identifier: GPL-2.0 */
/* This file defines field values used by the versaclock 6 family
* for defining output type
*/
#define VC5_LVPECL 0
#define VC5_CMOS 1
#define VC5_HCSL33 2
#define VC5_LVDS 3
#define VC5_CMOS2 4
#define VC5_CMOSD 5
#define VC5_HCSL25 6
......@@ -65,6 +65,8 @@
#define AGILEX_SDMMC_CLK 50
#define AGILEX_SPI_M_CLK 51
#define AGILEX_USB_CLK 52
#define AGILEX_NUM_CLKS 53
#define AGILEX_NAND_X_CLK 53
#define AGILEX_NAND_ECC_CLK 54
#define AGILEX_NUM_CLKS 55
#endif /* __AGILEX_CLOCK_H */
/* SPDX-License-Identifier: GPL-2.0+ */
#ifndef __DT_BINDINGS_CLOCK_BCM3368_H
#define __DT_BINDINGS_CLOCK_BCM3368_H
#define BCM3368_CLK_MAC 3
#define BCM3368_CLK_TC 5
#define BCM3368_CLK_US_TOP 6
#define BCM3368_CLK_DS_TOP 7
#define BCM3368_CLK_ACM 8
#define BCM3368_CLK_SPI 9
#define BCM3368_CLK_USBS 10
#define BCM3368_CLK_BMU 11
#define BCM3368_CLK_PCM 12
#define BCM3368_CLK_NTP 13
#define BCM3368_CLK_ACP_B 14
#define BCM3368_CLK_ACP_A 15
#define BCM3368_CLK_EMUSB 17
#define BCM3368_CLK_ENET0 18
#define BCM3368_CLK_ENET1 19
#define BCM3368_CLK_USBSU 20
#define BCM3368_CLK_EPHY 21
#endif /* __DT_BINDINGS_CLOCK_BCM3368_H */
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -145,5 +145,7 @@
#define CLKID_CPU3_CLK 255
#define CLKID_SPICC0_SCLK 258
#define CLKID_SPICC1_SCLK 261
#define CLKID_NNA_AXI_CLK 264
#define CLKID_NNA_CORE_CLK 267
#endif /* __G12A_CLKC_H */
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment