net: phy: mscc: remove the use of .ack_interrupt()

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com> # VSC8514
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/phy/mscc/mscc_main.c

@@ -1923,6 +1923,10 @@ static int vsc85xx_config_intr(struct phy_device *phydev)
 	int rc;
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		rc = vsc85xx_ack_interrupt(phydev);
+		if (rc)
+			return rc;
+
 		vsc8584_config_macsec_intr(phydev);
 		vsc8584_config_ts_intr(phydev);
 
@@ -1933,6 +1937,10 @@ static int vsc85xx_config_intr(struct phy_device *phydev)
 		if (rc < 0)
 			return rc;
 		rc = phy_read(phydev, MII_VSC85XX_INT_STATUS);
+		if (rc < 0)
+			return rc;
+
+		rc = vsc85xx_ack_interrupt(phydev);
 	}
 
 	return rc;
@@ -2338,7 +2346,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
 	.handle_interrupt = &vsc8584_handle_interrupt,
-	.ack_interrupt  = &vsc85xx_ack_interrupt,
 	.config_intr    = &vsc85xx_config_intr,
 	.suspend	= &genphy_suspend,
 	.resume		= &genphy_resume,
@@ -2389,7 +2396,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
 	.handle_interrupt = &vsc8584_handle_interrupt,
-	.ack_interrupt  = &vsc85xx_ack_interrupt,
 	.config_intr    = &vsc85xx_config_intr,
 	.suspend	= &genphy_suspend,
 	.resume		= &genphy_resume,
@@ -2413,7 +2419,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
 	.handle_interrupt = &vsc8584_handle_interrupt,
-	.ack_interrupt  = &vsc85xx_ack_interrupt,
 	.config_intr    = &vsc85xx_config_intr,
 	.suspend	= &genphy_suspend,
 	.resume		= &genphy_resume,
@@ -2437,7 +2442,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
 	.handle_interrupt = &vsc8584_handle_interrupt,
-	.ack_interrupt  = &vsc85xx_ack_interrupt,
 	.config_intr    = &vsc85xx_config_intr,
 	.suspend	= &genphy_suspend,
 	.resume		= &genphy_resume,