Commit 30845586 authored by Sumit Saxena's avatar Sumit Saxena Committed by Martin K. Petersen

megaraid_sas: Don't issue kill adapter for MFI controllers in case of PD list DCMD failure

There are few MFI adapters which do not support MR_DCMD_PD_LIST_QUERY so
if MFI adapters fail this DCMD, it should not be considered as FATAL and
driver should not issue kill adapter and set per controller's instance
variable- pd_list_not_supported so that same variable can be used inside
functions- slave_alloc and slave_configure to allow firmware scan.

Killing adapter because of DCMD failure when this DCMD is not supported
causes driver's probe getting failed. This issue got introduced by
commit 6d40afbc ("megaraid_sas: MFI IO timeout handling").

Killing adapter in case of this DCMD failure should be limited to Fusion
adapters only. Per controller's instance variable allow_fw_scan is
removed as pd_list_not_supported better reflect the purpose.

Fixes: 6d40afbcSigned-off-by: default avatarSumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: default avatarHannes Reinicke <hare@suse.de>
Reviewed-by: default avatarEwan Milne <emilne@redhat.com>
Reviewed-by: default avatarTomas Henzl <thenzl@redhat.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 7f8b8f3f
...@@ -2097,7 +2097,7 @@ struct megasas_instance { ...@@ -2097,7 +2097,7 @@ struct megasas_instance {
u8 UnevenSpanSupport; u8 UnevenSpanSupport;
u8 supportmax256vd; u8 supportmax256vd;
u8 allow_fw_scan; u8 pd_list_not_supported;
u16 fw_supported_vd_count; u16 fw_supported_vd_count;
u16 fw_supported_pd_count; u16 fw_supported_pd_count;
......
...@@ -1838,7 +1838,7 @@ static int megasas_slave_configure(struct scsi_device *sdev) ...@@ -1838,7 +1838,7 @@ static int megasas_slave_configure(struct scsi_device *sdev)
struct megasas_instance *instance; struct megasas_instance *instance;
instance = megasas_lookup_instance(sdev->host->host_no); instance = megasas_lookup_instance(sdev->host->host_no);
if (instance->allow_fw_scan) { if (instance->pd_list_not_supported) {
if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && if (sdev->channel < MEGASAS_MAX_PD_CHANNELS &&
sdev->type == TYPE_DISK) { sdev->type == TYPE_DISK) {
pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
...@@ -1874,7 +1874,8 @@ static int megasas_slave_alloc(struct scsi_device *sdev) ...@@ -1874,7 +1874,8 @@ static int megasas_slave_alloc(struct scsi_device *sdev)
pd_index = pd_index =
(sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
sdev->id; sdev->id;
if ((instance->allow_fw_scan || instance->pd_list[pd_index].driveState == if ((instance->pd_list_not_supported ||
instance->pd_list[pd_index].driveState ==
MR_PD_STATE_SYSTEM)) { MR_PD_STATE_SYSTEM)) {
goto scan_target; goto scan_target;
} }
...@@ -4087,7 +4088,13 @@ megasas_get_pd_list(struct megasas_instance *instance) ...@@ -4087,7 +4088,13 @@ megasas_get_pd_list(struct megasas_instance *instance)
switch (ret) { switch (ret) {
case DCMD_FAILED: case DCMD_FAILED:
megaraid_sas_kill_hba(instance); dev_info(&instance->pdev->dev, "MR_DCMD_PD_LIST_QUERY "
"failed/not supported by firmware\n");
if (instance->ctrl_context)
megaraid_sas_kill_hba(instance);
else
instance->pd_list_not_supported = 1;
break; break;
case DCMD_TIMEOUT: case DCMD_TIMEOUT:
...@@ -5034,7 +5041,6 @@ static int megasas_init_fw(struct megasas_instance *instance) ...@@ -5034,7 +5041,6 @@ static int megasas_init_fw(struct megasas_instance *instance)
case PCI_DEVICE_ID_DELL_PERC5: case PCI_DEVICE_ID_DELL_PERC5:
default: default:
instance->instancet = &megasas_instance_template_xscale; instance->instancet = &megasas_instance_template_xscale;
instance->allow_fw_scan = 1;
break; break;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment