Commit 3091e611 authored by Boojin Kim's avatar Boojin Kim Committed by Vinod Koul

ARM: S5P64X0: Use generic DMA PL330 driver

This patch makes Samsung S5P64X0 to use DMA PL330 driver
on DMADEVICE. The S5P64X0 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.
Signed-off-by: default avatarBoojin Kim <boojin.kim@samsung.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Acked-by: default avatarVinod Koul <vinod.koul@intel.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
parent a422bd0f
......@@ -9,14 +9,14 @@ if ARCH_S5P64X0
config CPU_S5P6440
bool
select S3C_PL330_DMA
select SAMSUNG_DMADEV
select S5P_HRT
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
select S3C_PL330_DMA
select SAMSUNG_DMADEV
select S5P_HRT
help
Enable S5P6450 CPU support
......
......@@ -146,7 +146,7 @@ static struct clk init_clocks_off[] = {
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 8),
}, {
.name = "pdma",
.name = "dma",
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 12),
......@@ -499,6 +499,11 @@ static struct clksrc_clk *sysclks[] = {
&clk_pclk_low,
};
static struct clk dummy_apb_pclk = {
.name = "apb_pclk",
.id = -1,
};
void __init_or_cpufreq s5p6440_setup_clocks(void)
{
struct clk *xtal_clk;
......@@ -581,5 +586,7 @@ void __init s5p6440_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
......@@ -179,7 +179,7 @@ static struct clk init_clocks_off[] = {
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "pdma",
.name = "dma",
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 12),
......@@ -553,6 +553,11 @@ static struct clksrc_clk *sysclks[] = {
&clk_sclk_audio0,
};
static struct clk dummy_apb_pclk = {
.name = "apb_pclk",
.id = -1,
};
void __init_or_cpufreq s5p6450_setup_clocks(void)
{
struct clk *xtal_clk;
......@@ -632,5 +637,7 @@ void __init s5p6450_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
......@@ -21,128 +21,219 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
#include <asm/irq.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/regs-clock.h>
#include <mach/dma.h>
#include <plat/devs.h>
#include <plat/s3c-pl330-pdata.h>
#include <plat/irqs.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
static struct resource s5p64x0_pdma_resource[] = {
[0] = {
.start = S5P64X0_PA_PDMA,
.end = S5P64X0_PA_PDMA + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_DMA0,
.end = IRQ_DMA0,
.flags = IORESOURCE_IRQ,
struct dma_pl330_peri s5p6440_pdma_peri[22] = {
{
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = DMACH_MAX,
}, {
.peri_id = DMACH_MAX,
}, {
.peri_id = (u8)DMACH_PCM0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
},
};
static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
.peri = {
[0] = DMACH_UART0_RX,
[1] = DMACH_UART0_TX,
[2] = DMACH_UART1_RX,
[3] = DMACH_UART1_TX,
[4] = DMACH_UART2_RX,
[5] = DMACH_UART2_TX,
[6] = DMACH_UART3_RX,
[7] = DMACH_UART3_TX,
[8] = DMACH_MAX,
[9] = DMACH_MAX,
[10] = DMACH_PCM0_TX,
[11] = DMACH_PCM0_RX,
[12] = DMACH_I2S0_TX,
[13] = DMACH_I2S0_RX,
[14] = DMACH_SPI0_TX,
[15] = DMACH_SPI0_RX,
[16] = DMACH_MAX,
[17] = DMACH_MAX,
[18] = DMACH_MAX,
[19] = DMACH_MAX,
[20] = DMACH_SPI1_TX,
[21] = DMACH_SPI1_RX,
[22] = DMACH_MAX,
[23] = DMACH_MAX,
[24] = DMACH_MAX,
[25] = DMACH_MAX,
[26] = DMACH_MAX,
[27] = DMACH_MAX,
[28] = DMACH_MAX,
[29] = DMACH_PWM,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
},
struct dma_pl330_platdata s5p6440_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
.peri = s5p6440_pdma_peri,
};
static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
.peri = {
[0] = DMACH_UART0_RX,
[1] = DMACH_UART0_TX,
[2] = DMACH_UART1_RX,
[3] = DMACH_UART1_TX,
[4] = DMACH_UART2_RX,
[5] = DMACH_UART2_TX,
[6] = DMACH_UART3_RX,
[7] = DMACH_UART3_TX,
[8] = DMACH_UART4_RX,
[9] = DMACH_UART4_TX,
[10] = DMACH_PCM0_TX,
[11] = DMACH_PCM0_RX,
[12] = DMACH_I2S0_TX,
[13] = DMACH_I2S0_RX,
[14] = DMACH_SPI0_TX,
[15] = DMACH_SPI0_RX,
[16] = DMACH_PCM1_TX,
[17] = DMACH_PCM1_RX,
[18] = DMACH_PCM2_TX,
[19] = DMACH_PCM2_RX,
[20] = DMACH_SPI1_TX,
[21] = DMACH_SPI1_RX,
[22] = DMACH_USI_TX,
[23] = DMACH_USI_RX,
[24] = DMACH_MAX,
[25] = DMACH_I2S1_TX,
[26] = DMACH_I2S1_RX,
[27] = DMACH_I2S2_TX,
[28] = DMACH_I2S2_RX,
[29] = DMACH_PWM,
[30] = DMACH_UART5_RX,
[31] = DMACH_UART5_TX,
struct dma_pl330_peri s5p6450_pdma_peri[32] = {
{
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART4_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART4_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_USI_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_USI_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_I2S1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PWM,
}, {
.peri_id = (u8)DMACH_UART5_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART5_TX,
.rqtype = MEMTODEV,
},
};
static struct platform_device s5p64x0_device_pdma = {
.name = "s3c-pl330",
.id = -1,
.num_resources = ARRAY_SIZE(s5p64x0_pdma_resource),
.resource = s5p64x0_pdma_resource,
.dev = {
struct dma_pl330_platdata s5p6450_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
.peri = s5p6450_pdma_peri,
};
struct amba_device s5p64x0_device_pdma = {
.dev = {
.init_name = "dma-pl330",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.res = {
.start = S5P64X0_PA_PDMA,
.end = S5P64X0_PA_PDMA + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_DMA0, NO_IRQ},
.periphid = 0x00041330,
};
static int __init s5p64x0_dma_init(void)
{
unsigned int id;
id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
unsigned int id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
if (id == 0x50000)
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
else
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
platform_device_register(&s5p64x0_device_pdma);
amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
return 0;
}
......
......@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
/* This platform uses the common S3C DMA API driver for PL330 */
/* This platform uses the common common DMA API driver for PL330 */
#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment