Commit 30af9b55 authored by Mark Brown's avatar Mark Brown

spi/bitbang: Drop empty setup() functions

Now that the bitbang core does not require a setup() function we can
drop the check in the altera, nuc900 and xilinx drivers.
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 52ade736
...@@ -103,16 +103,6 @@ static void altera_spi_chipsel(struct spi_device *spi, int value) ...@@ -103,16 +103,6 @@ static void altera_spi_chipsel(struct spi_device *spi, int value)
} }
} }
static int altera_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
{
return 0;
}
static int altera_spi_setup(struct spi_device *spi)
{
return 0;
}
static inline unsigned int hw_txbyte(struct altera_spi *hw, int count) static inline unsigned int hw_txbyte(struct altera_spi *hw, int count)
{ {
if (hw->tx) { if (hw->tx) {
...@@ -231,7 +221,6 @@ static int altera_spi_probe(struct platform_device *pdev) ...@@ -231,7 +221,6 @@ static int altera_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id; master->bus_num = pdev->id;
master->num_chipselect = 16; master->num_chipselect = 16;
master->mode_bits = SPI_CS_HIGH; master->mode_bits = SPI_CS_HIGH;
master->setup = altera_spi_setup;
hw = spi_master_get_devdata(master); hw = spi_master_get_devdata(master);
platform_set_drvdata(pdev, hw); platform_set_drvdata(pdev, hw);
...@@ -240,7 +229,6 @@ static int altera_spi_probe(struct platform_device *pdev) ...@@ -240,7 +229,6 @@ static int altera_spi_probe(struct platform_device *pdev)
hw->bitbang.master = spi_master_get(master); hw->bitbang.master = spi_master_get(master);
if (!hw->bitbang.master) if (!hw->bitbang.master)
return err; return err;
hw->bitbang.setup_transfer = altera_spi_setupxfer;
hw->bitbang.chipselect = altera_spi_chipsel; hw->bitbang.chipselect = altera_spi_chipsel;
hw->bitbang.txrx_bufs = altera_spi_txrx; hw->bitbang.txrx_bufs = altera_spi_txrx;
......
...@@ -174,17 +174,6 @@ static void nuc900_spi_gobusy(struct nuc900_spi *hw) ...@@ -174,17 +174,6 @@ static void nuc900_spi_gobusy(struct nuc900_spi *hw)
spin_unlock_irqrestore(&hw->lock, flags); spin_unlock_irqrestore(&hw->lock, flags);
} }
static int nuc900_spi_setupxfer(struct spi_device *spi,
struct spi_transfer *t)
{
return 0;
}
static int nuc900_spi_setup(struct spi_device *spi)
{
return 0;
}
static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count) static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count)
{ {
return hw->tx ? hw->tx[count] : 0; return hw->tx ? hw->tx[count] : 0;
...@@ -377,10 +366,8 @@ static int nuc900_spi_probe(struct platform_device *pdev) ...@@ -377,10 +366,8 @@ static int nuc900_spi_probe(struct platform_device *pdev)
master->num_chipselect = hw->pdata->num_cs; master->num_chipselect = hw->pdata->num_cs;
master->bus_num = hw->pdata->bus_num; master->bus_num = hw->pdata->bus_num;
hw->bitbang.master = hw->master; hw->bitbang.master = hw->master;
hw->bitbang.setup_transfer = nuc900_spi_setupxfer;
hw->bitbang.chipselect = nuc900_spi_chipsel; hw->bitbang.chipselect = nuc900_spi_chipsel;
hw->bitbang.txrx_bufs = nuc900_spi_txrx; hw->bitbang.txrx_bufs = nuc900_spi_txrx;
hw->bitbang.master->setup = nuc900_spi_setup;
hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (hw->res == NULL) { if (hw->res == NULL) {
......
...@@ -233,21 +233,6 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi, ...@@ -233,21 +233,6 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
return 0; return 0;
} }
static int xilinx_spi_setup(struct spi_device *spi)
{
/* always return 0, we can not check the number of bits.
* There are cases when SPI setup is called before any driver is
* there, in that case the SPI core defaults to 8 bits, which we
* do not support in some cases. But if we return an error, the
* SPI device would not be registered and no driver can get hold of it
* When the driver is there, it will call SPI setup again with the
* correct number of bits per transfer.
* If a driver setups with the wrong bit number, it will fail when
* it tries to do a transfer
*/
return 0;
}
static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi) static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
{ {
u8 sr; u8 sr;
...@@ -375,7 +360,6 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, ...@@ -375,7 +360,6 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
xspi->bitbang.chipselect = xilinx_spi_chipselect; xspi->bitbang.chipselect = xilinx_spi_chipselect;
xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer; xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs; xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
xspi->bitbang.master->setup = xilinx_spi_setup;
init_completion(&xspi->done); init_completion(&xspi->done);
if (!request_mem_region(mem->start, resource_size(mem), if (!request_mem_region(mem->start, resource_size(mem),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment