Merge branch 'net-coding-style'

Weihang Li says:

====================
net: fix some coding style issues

Do some cleanups according to the coding style of kernel, including wrong
print type, redundant and missing spaces and so on.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/amazon/ena/ena_com.c

@@ -863,7 +863,7 @@ static u32 ena_com_reg_bar_read32(struct ena_com_dev *ena_dev, u16 offset)
 
 	if (unlikely(i == timeout)) {
 		netdev_err(ena_dev->net_device,
-			   "Reading reg failed for timeout. expected: req id[%hu] offset[%hu] actual: req id[%hu] offset[%hu]\n",
+			   "Reading reg failed for timeout. expected: req id[%u] offset[%u] actual: req id[%u] offset[%u]\n",
 			   mmio_read->seq_num, offset, read_resp->req_id,
 			   read_resp->reg_off);
 		ret = ENA_MMIO_READ_TIMEOUT;
@@ -2396,7 +2396,7 @@ int ena_com_fill_hash_function(struct ena_com_dev *ena_dev,
 		if (key) {
 			if (key_len != sizeof(hash_key->key)) {
 				netdev_err(ena_dev->net_device,
-					   "key len (%hu) doesn't equal the supported size (%zu)\n",
+					   "key len (%u) doesn't equal the supported size (%zu)\n",
 					   key_len, sizeof(hash_key->key));
 				return -EINVAL;
 			}

drivers/net/ethernet/amazon/ena/ena_netdev.c

@@ -3975,7 +3975,7 @@ static u32 ena_calc_max_io_queue_num(struct pci_dev *pdev,
 	max_num_io_queues = min_t(u32, max_num_io_queues, io_rx_num);
 	max_num_io_queues = min_t(u32, max_num_io_queues, io_tx_sq_num);
 	max_num_io_queues = min_t(u32, max_num_io_queues, io_tx_cq_num);
-	/* 1 IRQ for for mgmnt and 1 IRQs for each IO direction */
+	/* 1 IRQ for mgmnt and 1 IRQs for each IO direction */
 	max_num_io_queues = min_t(u32, max_num_io_queues, pci_msix_vec_count(pdev) - 1);
 	if (unlikely(!max_num_io_queues)) {
 		dev_err(&pdev->dev, "The device doesn't have io queues\n");

drivers/net/ethernet/amd/hplance.c

@@ -170,6 +170,7 @@ static void hplance_init(struct net_device *dev, struct dio_dev *d)
 static void hplance_writerap(void *priv, unsigned short value)
 {
 	struct lance_private *lp = (struct lance_private *)priv;
+
 	do {
 		out_be16(lp->base + HPLANCE_REGOFF + LANCE_RAP, value);
 	} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
@@ -178,6 +179,7 @@ static void hplance_writerap(void *priv, unsigned short value)
 static void hplance_writerdp(void *priv, unsigned short value)
 {
 	struct lance_private *lp = (struct lance_private *)priv;
+
 	do {
 		out_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP, value);
 	} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
@@ -187,6 +189,7 @@ static unsigned short hplance_readrdp(void *priv)
 {
 	struct lance_private *lp = (struct lance_private *)priv;
 	__u16 value;
+
 	do {
 		value = in_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP);
 	} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);

drivers/net/ethernet/mscc/ocelot.c

@@ -484,7 +484,8 @@ void ocelot_adjust_link(struct ocelot *ocelot, int port,
 			   DEV_MAC_ENA_CFG_TX_ENA, DEV_MAC_ENA_CFG);
 
 	/* Take MAC, Port, Phy (intern) and PCS (SGMII/Serdes) clock out of
-	 * reset */
+	 * reset
+	 */
 	ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(speed),
 			   DEV_CLOCK_CFG);
 

drivers/net/ethernet/nxp/lpc_eth.c

@@ -1044,7 +1044,8 @@ static netdev_tx_t lpc_eth_hard_start_xmit(struct sk_buff *skb,
 
 	if (pldat->num_used_tx_buffs >= (ENET_TX_DESC - 1)) {
 		/* This function should never be called when there are no
-		   buffers */
+		 * buffers
+		 */
 		netif_stop_queue(ndev);
 		spin_unlock_irq(&pldat->lock);
 		WARN(1, "BUG! TX request when no free TX buffers!\n");
@@ -1318,7 +1319,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 		pldat->dma_buff_size = PAGE_ALIGN(pldat->dma_buff_size);
 
 		/* Allocate a chunk of memory for the DMA ethernet buffers
-		   and descriptors */
+		 * and descriptors
+		 */
 		pldat->dma_buff_base_v =
 			dma_alloc_coherent(dev,
 					   pldat->dma_buff_size, &dma_handle,
@@ -1365,7 +1367,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 	__lpc_mii_mngt_reset(pldat);
 
 	/* Force default PHY interface setup in chip, this will probably be
-	   changed by the PHY driver */
+	 * changed by the PHY driver
+	 */
 	pldat->link = 0;
 	pldat->speed = 100;
 	pldat->duplex = DUPLEX_FULL;

drivers/net/ethernet/toshiba/spider_net.c

@@ -146,7 +146,8 @@ spider_net_read_phy(struct net_device *netdev, int mii_id, int reg)
 
 	/* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
 	 * interrupt, as we poll for the completion of the read operation
-	 * in spider_net_read_phy. Should take about 50 us */
+	 * in spider_net_read_phy. Should take about 50 us
+	 */
 	do {
 		readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD);
 	} while (readvalue & SPIDER_NET_GPREXEC);
@@ -387,7 +388,8 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
 		(~(SPIDER_NET_RXBUF_ALIGN - 1));
 
 	/* and we need to have it 128 byte aligned, therefore we allocate a
-	 * bit more */
+	 * bit more
+	 */
 	/* allocate an skb */
 	descr->skb = netdev_alloc_skb(card->netdev,
 				      bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
@@ -488,7 +490,8 @@ spider_net_refill_rx_chain(struct spider_net_card *card)
 	/* one context doing the refill (and a second context seeing that
 	 * and omitting it) is ok. If called by NAPI, we'll be called again
 	 * as spider_net_decode_one_descr is called several times. If some
-	 * interrupt calls us, the NAPI is about to clean up anyway. */
+	 * interrupt calls us, the NAPI is about to clean up anyway.
+	 */
 	if (!spin_trylock_irqsave(&chain->lock, flags))
 		return;
 
@@ -523,14 +526,16 @@ spider_net_alloc_rx_skbs(struct spider_net_card *card)
 
 	/* Put at least one buffer into the chain. if this fails,
 	 * we've got a problem. If not, spider_net_refill_rx_chain
-	 * will do the rest at the end of this function. */
+	 * will do the rest at the end of this function.
+	 */
 	if (spider_net_prepare_rx_descr(card, chain->head))
 		goto error;
 	else
 		chain->head = chain->head->next;
 
 	/* This will allocate the rest of the rx buffers;
-	 * if not, it's business as usual later on. */
+	 * if not, it's business as usual later on.
+	 */
 	spider_net_refill_rx_chain(card);
 	spider_net_enable_rxdmac(card);
 	return 0;
@@ -706,7 +711,8 @@ spider_net_set_low_watermark(struct spider_net_card *card)
 	int i;
 
 	/* Measure the length of the queue. Measurement does not
-	 * need to be precise -- does not need a lock. */
+	 * need to be precise -- does not need a lock.
+	 */
 	while (descr != card->tx_chain.head) {
 		status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE;
 		if (status == SPIDER_NET_DESCR_NOT_IN_USE)
@@ -786,7 +792,8 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
 
 			/* fallthrough, if we release the descriptors
 			 * brutally (then we don't care about
-			 * SPIDER_NET_DESCR_CARDOWNED) */
+			 * SPIDER_NET_DESCR_CARDOWNED)
+			 */
 			fallthrough;
 
 		case SPIDER_NET_DESCR_RESPONSE_ERROR:
@@ -948,7 +955,8 @@ spider_net_pass_skb_up(struct spider_net_descr *descr,
 	skb_put(skb, hwdescr->valid_size);
 
 	/* the card seems to add 2 bytes of junk in front
-	 * of the ethernet frame */
+	 * of the ethernet frame
+	 */
 #define SPIDER_MISALIGN		2
 	skb_pull(skb, SPIDER_MISALIGN);
 	skb->protocol = eth_type_trans(skb, netdev);
@@ -1382,7 +1390,8 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg,
 		/* PHY read operation completed */
 		/* we don't use semaphores, as we poll for the completion
 		 * of the read operation in spider_net_read_phy. Should take
-		 * about 50 us */
+		 * about 50 us
+		 */
 		show_error = 0;
 		break;
 	case SPIDER_NET_GPWFFINT:
@@ -1450,7 +1459,8 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg,
 	{
 	case SPIDER_NET_GTMFLLINT:
 		/* TX RAM full may happen on a usual case.
-		 * Logging is not needed. */
+		 * Logging is not needed.
+		 */
 		show_error = 0;
 		break;
 	case SPIDER_NET_GRFDFLLINT:
@@ -1694,7 +1704,8 @@ spider_net_enable_card(struct spider_net_card *card)
 {
 	int i;
 	/* the following array consists of (register),(value) pairs
-	 * that are set in this function. A register of 0 ends the list */
+	 * that are set in this function. A register of 0 ends the list
+	 */
 	u32 regs[][2] = {
 		{ SPIDER_NET_GRESUMINTNUM, 0 },
 		{ SPIDER_NET_GREINTNUM, 0 },
@@ -1757,7 +1768,8 @@ spider_net_enable_card(struct spider_net_card *card)
 	spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
 
 	/* set chain tail address for RX chains and
-	 * enable DMA */
+	 * enable DMA
+	 */
 	spider_net_enable_rxchtails(card);
 	spider_net_enable_rxdmac(card);
 
@@ -1995,7 +2007,8 @@ static void spider_net_link_phy(struct timer_list *t)
 
 		case BCM54XX_UNKNOWN:
 			/* copper, fiber with and without failed,
-			 * retry from beginning */
+			 * retry from beginning
+			 */
 			spider_net_setup_aneg(card);
 			card->medium = BCM54XX_COPPER;
 			break;
@@ -2263,7 +2276,8 @@ spider_net_setup_netdev(struct spider_net_card *card)
 		netdev->features |= NETIF_F_RXCSUM;
 	netdev->features |= NETIF_F_IP_CSUM | NETIF_F_LLTX;
 	/* some time: NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
-	 *		NETIF_F_HW_VLAN_CTAG_FILTER */
+	 *		NETIF_F_HW_VLAN_CTAG_FILTER
+	 */
 
 	/* MTU range: 64 - 2294 */
 	netdev->min_mtu = SPIDER_NET_MIN_MTU;

drivers/net/ethernet/toshiba/tc35815.c

@@ -1914,7 +1914,8 @@ tc35815_set_multicast_list(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {
 		/* With some (all?) 100MHalf HUB, controller will hang
-		 * if we enabled promiscuous mode before linkup... */
+		 * if we enabled promiscuous mode before linkup...
+		 */
 		struct tc35815_local *lp = netdev_priv(dev);
 
 		if (!lp->link)