Commit 31018e06 authored by Amit Kumar Salecha's avatar Amit Kumar Salecha Committed by David S. Miller

qlcnic: change reg name

Change QLCNIC_CRB_DEV_REF_COUNT to QLCNIC_CRB_DRV_ACTIVE to match
document.
Signed-off-by: default avatarAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b18971d1
......@@ -99,7 +99,7 @@ static const u32 diag_registers[] = {
CRB_XG_STATE_P3,
CRB_FW_CAPABILITIES_1,
ISR_INT_STATE_REG,
QLCNIC_CRB_DEV_REF_COUNT,
QLCNIC_CRB_DRV_ACTIVE,
QLCNIC_CRB_DEV_STATE,
QLCNIC_CRB_DRV_STATE,
QLCNIC_CRB_DRV_SCRATCH,
......
......@@ -698,7 +698,7 @@ enum {
#define QLCNIC_PEG_ALIVE_COUNTER (QLCNIC_CAM_RAM(0xb0))
#define QLCNIC_PEG_HALT_STATUS1 (QLCNIC_CAM_RAM(0xa8))
#define QLCNIC_PEG_HALT_STATUS2 (QLCNIC_CAM_RAM(0xac))
#define QLCNIC_CRB_DEV_REF_COUNT (QLCNIC_CAM_RAM(0x138))
#define QLCNIC_CRB_DRV_ACTIVE (QLCNIC_CAM_RAM(0x138))
#define QLCNIC_CRB_DEV_STATE (QLCNIC_CAM_RAM(0x140))
#define QLCNIC_CRB_DRV_STATE (QLCNIC_CAM_RAM(0x144))
......
......@@ -540,7 +540,7 @@ qlcnic_set_function_modes(struct qlcnic_adapter *adapter)
void __iomem *priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
/* If other drivers are not in use set their privilege level */
ref_count = QLCRD32(adapter, QLCNIC_CRB_DEV_REF_COUNT);
ref_count = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE);
ret = qlcnic_api_lock(adapter);
if (ret)
goto err_lock;
......@@ -2404,9 +2404,9 @@ qlcnic_clr_all_drv_state(struct qlcnic_adapter *adapter, u8 failed)
if (qlcnic_api_lock(adapter))
goto err;
val = QLCRD32(adapter, QLCNIC_CRB_DEV_REF_COUNT);
val = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE);
QLC_DEV_CLR_REF_CNT(val, adapter->portnum);
QLCWR32(adapter, QLCNIC_CRB_DEV_REF_COUNT, val);
QLCWR32(adapter, QLCNIC_CRB_DRV_ACTIVE, val);
if (failed) {
QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_FAILED);
......@@ -2433,7 +2433,7 @@ qlcnic_check_drv_state(struct qlcnic_adapter *adapter)
int act, state;
state = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE);
act = QLCRD32(adapter, QLCNIC_CRB_DEV_REF_COUNT);
act = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE);
if (((state & 0x11111111) == (act & 0x11111111)) ||
((act & 0x11111111) == ((state >> 1) & 0x11111111)))
......@@ -2468,10 +2468,10 @@ qlcnic_can_start_firmware(struct qlcnic_adapter *adapter)
if (qlcnic_api_lock(adapter))
return -1;
val = QLCRD32(adapter, QLCNIC_CRB_DEV_REF_COUNT);
val = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE);
if (!(val & (1 << (portnum * 4)))) {
QLC_DEV_SET_REF_CNT(val, portnum);
QLCWR32(adapter, QLCNIC_CRB_DEV_REF_COUNT, val);
QLCWR32(adapter, QLCNIC_CRB_DRV_ACTIVE, val);
}
prev_state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment