Commit 310fc051 authored by Gustavo A. R. Silva's avatar Gustavo A. R. Silva Committed by David S. Miller

tg3: Fix fall-through annotations

Replace "fallthru" with a proper "fall through" annotation.

This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 50c12f74
......@@ -1598,7 +1598,7 @@ static int tg3_mdio_init(struct tg3 *tp)
phydev->dev_flags |= PHY_BRCM_EXT_IBND_RX_ENABLE;
if (tg3_flag(tp, RGMII_EXT_IBND_TX_EN))
phydev->dev_flags |= PHY_BRCM_EXT_IBND_TX_ENABLE;
/* fallthru */
/* fall through */
case PHY_ID_RTL8211C:
phydev->interface = PHY_INTERFACE_MODE_RGMII;
break;
......@@ -2126,7 +2126,7 @@ static int tg3_phy_init(struct tg3 *tp)
phy_support_asym_pause(phydev);
break;
}
/* fallthru */
/* fall through */
case PHY_INTERFACE_MODE_MII:
phy_set_max_speed(phydev, SPEED_100);
phy_support_asym_pause(phydev);
......@@ -5211,7 +5211,7 @@ static int tg3_fiber_aneg_smachine(struct tg3 *tp,
if (ap->flags & (MR_AN_ENABLE | MR_RESTART_AN))
ap->state = ANEG_STATE_AN_ENABLE;
/* fallthru */
/* fall through */
case ANEG_STATE_AN_ENABLE:
ap->flags &= ~(MR_AN_COMPLETE | MR_PAGE_RX);
if (ap->flags & MR_AN_ENABLE) {
......@@ -5241,7 +5241,7 @@ static int tg3_fiber_aneg_smachine(struct tg3 *tp,
ret = ANEG_TIMER_ENAB;
ap->state = ANEG_STATE_RESTART;
/* fallthru */
/* fall through */
case ANEG_STATE_RESTART:
delta = ap->cur_time - ap->link_time;
if (delta > ANEG_STATE_SETTLE_TIME)
......@@ -5284,7 +5284,7 @@ static int tg3_fiber_aneg_smachine(struct tg3 *tp,
ap->state = ANEG_STATE_ACK_DETECT;
/* fallthru */
/* fall through */
case ANEG_STATE_ACK_DETECT:
if (ap->ack_match != 0) {
if ((ap->rxconfig & ~ANEG_CFG_ACK) ==
......@@ -13988,7 +13988,7 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
case SIOCGMIIPHY:
data->phy_id = tp->phy_addr;
/* fallthru */
/* fall through */
case SIOCGMIIREG: {
u32 mii_regval;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment