Commit 31481455 authored by Christoph Hellwig's avatar Christoph Hellwig Committed by Martin K. Petersen

scsi: gdth: remove ISA and EISA support

The non-PCI code has bitrotted for quite a while and will just oops
on load because it passes a NULL pointer to the PCI DMA routines.

Lets kill it for good - if someone really wants to use one of these
cards I'll help mentoring them to write a proper driver glue.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 463563fa
......@@ -665,7 +665,7 @@ config SCSI_DMX3191D
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
depends on PCI && SCSI
---help---
Formerly called GDT SCSI Disk Array Controller Support.
......
This diff is collapsed.
......@@ -38,17 +38,9 @@
#define OEM_ID_INTEL 0x8000
/* controller classes */
#define GDT_ISA 0x01 /* ISA controller */
#define GDT_EISA 0x02 /* EISA controller */
#define GDT_PCI 0x03 /* PCI controller */
#define GDT_PCINEW 0x04 /* new PCI controller */
#define GDT_PCIMPR 0x05 /* PCI MPR controller */
/* GDT_EISA, controller subtypes EISA */
#define GDT3_ID 0x0130941c /* GDT3000/3020 */
#define GDT3A_ID 0x0230941c /* GDT3000A/3020A/3050A */
#define GDT3B_ID 0x0330941c /* GDT3000B/3010A */
/* GDT_ISA */
#define GDT2_ID 0x0120941c /* GDT2000/2020 */
#ifndef PCI_DEVICE_ID_VORTEX_GDT60x0
/* GDT_PCI */
......@@ -281,17 +273,6 @@
#define GDTH_DATA_IN 0x01000000L /* data from target */
#define GDTH_DATA_OUT 0x00000000L /* data to target */
/* BMIC registers (EISA controllers) */
#define ID0REG 0x0c80 /* board ID */
#define EINTENABREG 0x0c89 /* interrupt enable */
#define SEMA0REG 0x0c8a /* command semaphore */
#define SEMA1REG 0x0c8b /* status semaphore */
#define LDOORREG 0x0c8d /* local doorbell */
#define EDENABREG 0x0c8e /* EISA system doorbell enab. */
#define EDOORREG 0x0c8f /* EISA system doorbell */
#define MAILBOXREG 0x0c90 /* mailbox reg. (16 bytes) */
#define EISAREG 0x0cc0 /* EISA configuration */
/* other defines */
#define LINUX_OS 8 /* used for cache optim. */
#define SECS32 0x1f /* round capacity */
......@@ -706,21 +687,11 @@ typedef struct {
u8 fw_magic; /* contr. ID from firmware */
} __attribute__((packed)) gdt_pci_sram;
/* SRAM structure EISA controllers (but NOT GDT3000/3020) */
typedef struct {
u8 os_used[16]; /* OS code per service */
u16 need_deinit; /* switch betw. BIOS/driver */
u8 switch_support; /* see need_deinit */
u8 padding;
} __attribute__((packed)) gdt_eisa_sram;
/* DPRAM ISA controllers */
typedef struct {
union {
struct {
u8 bios_used[0x3c00-32]; /* 15KB - 32Bytes BIOS */
u32 magic; /* controller (EISA) ID */
u16 need_deinit; /* switch betw. BIOS/driver */
u8 switch_support; /* see need_deinit */
u8 padding[9];
......@@ -843,7 +814,6 @@ typedef struct {
u16 cache_feat; /* feat. cache serv. (s/g,..)*/
u16 raw_feat; /* feat. raw service (s/g,..)*/
u16 screen_feat; /* feat. raw service (s/g,..)*/
u16 bmic; /* BMIC address (EISA) */
void __iomem *brd; /* DPRAM address */
u32 brd_phys; /* slot number/BIOS address */
gdt6c_plx_regs *plx; /* PLX regs (new PCI contr.) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment