Commit 3156b8eb authored by Dmitry Kravkov's avatar Dmitry Kravkov Committed by David S. Miller

bnx2x: utilize FW 7.8.19

    This new firmware fixes following bugs:
     1. HW attention appears and traffic stops when iSCSI firmware tries to
        retransmit iSCSI login command when the iSCSI login is carrying data
        not aligned to 4-bytes.
     2. FCoE traffic fails to run when running in switch-independent multi-function
        mode and there's more than one interface supporting FCoE on a given port.
     3. While two ports are running FCoE with at least one of them has a function
        number (>1) on the same engine in a 4-port device a zeroed CQE is given,
        causing FCoE traffic to stop.
Signed-off-by: default avatarDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: default avatarYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: default avatarAriel Elior <ariele@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 230bb0f3
...@@ -26,8 +26,8 @@ ...@@ -26,8 +26,8 @@
* (you will need to reboot afterwards) */ * (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */ /* #define BNX2X_STOP_ON_ERROR */
#define DRV_MODULE_VERSION "1.78.17-0" #define DRV_MODULE_VERSION "1.78.19-0"
#define DRV_MODULE_RELDATE "2013/04/11" #define DRV_MODULE_RELDATE "2014/02/10"
#define BNX2X_BC_VER 0x040200 #define BNX2X_BC_VER 0x040200
#if defined(CONFIG_DCB) #if defined(CONFIG_DCB)
......
...@@ -2848,7 +2848,7 @@ struct afex_stats { ...@@ -2848,7 +2848,7 @@ struct afex_stats {
#define BCM_5710_FW_MAJOR_VERSION 7 #define BCM_5710_FW_MAJOR_VERSION 7
#define BCM_5710_FW_MINOR_VERSION 8 #define BCM_5710_FW_MINOR_VERSION 8
#define BCM_5710_FW_REVISION_VERSION 17 #define BCM_5710_FW_REVISION_VERSION 19
#define BCM_5710_FW_ENGINEERING_VERSION 0 #define BCM_5710_FW_ENGINEERING_VERSION 0
#define BCM_5710_FW_COMPILE_FLAGS 1 #define BCM_5710_FW_COMPILE_FLAGS 1
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment