ARM: dts: pxa: add dma pxamci nodes to pxa3xx

Add the 3 possible mmc controllers on pxa3xx SoCs to the devicetree
description. Add the dma and clocks to the device-tree description of
pxa27x and pxa3xx at the same time.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

arch/arm/boot/dts/pxa2xx.dtsi

@@ -128,6 +128,10 @@ mmc0: mmc@41100000 {
 			compatible = "marvell,pxa-mmc";
 			reg = <0x41100000 0x1000>;
 			interrupts = <23>;
+			clocks = <&clks CLK_MMC>;
+			dmas = <&pdma 21 3
+				&pdma 22 3>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/pxa3xx.dtsi

@@ -53,6 +53,39 @@ gpio: gpio@40e00000 {
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
 		};
+
+		mmc0: mmc@41100000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x41100000 0x1000>;
+			interrupts = <23>;
+			clocks = <&clks CLK_MMC>;
+			dmas = <&pdma 21 3
+				&pdma 22 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		mmc1: mmc@42000000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x42000000 0x1000>;
+			interrupts = <41>;
+			clocks = <&clks CLK_MMC1>;
+			dmas = <&pdma 93 3
+				&pdma 94 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		mmc2: mmc@42500000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x42500000 0x1000>;
+			interrupts = <55>;
+			clocks = <&clks CLK_MMC2>;
+			dmas = <&pdma 46 3
+				&pdma 47 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
 	};
 
 	clocks {