Commit 31cd6e46 authored by Ranjani Sridharan's avatar Ranjani Sridharan Committed by Mark Brown

ASoC: SOF: topology: Add ops for setting up and tearing down pipelines

Introduce two new ops, set_up_all_pipelines and tear_down_all_pipelines
in struct ipc_tplg_ops and define these for IPC3.
Signed-off-by: default avatarRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: default avatarPéter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: default avatarBard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-19-ranjani.sridharan@linux.intel.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 3816bbea
......@@ -2057,6 +2057,201 @@ static int sof_ipc3_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
return ret;
}
static int sof_ipc3_set_up_all_pipelines(struct snd_sof_dev *sdev, bool verify)
{
struct sof_ipc_fw_version *v = &sdev->fw_ready.version;
struct snd_sof_widget *swidget;
struct snd_sof_route *sroute;
int ret;
/* restore pipeline components */
list_for_each_entry(swidget, &sdev->widget_list, list) {
/* only set up the widgets belonging to static pipelines */
if (!verify && swidget->dynamic_pipeline_widget)
continue;
/*
* For older firmware, skip scheduler widgets in this loop,
* sof_widget_setup() will be called in the 'complete pipeline' loop
*/
if (v->abi_version < SOF_ABI_VER(3, 19, 0) &&
swidget->id == snd_soc_dapm_scheduler)
continue;
/* update DAI config. The IPC will be sent in sof_widget_setup() */
if (WIDGET_IS_DAI(swidget->id)) {
struct snd_sof_dai *dai = swidget->private;
struct sof_dai_private_data *private;
struct sof_ipc_dai_config *config;
if (!dai || !dai->private)
continue;
private = dai->private;
if (!private->dai_config)
continue;
config = private->dai_config;
/*
* The link DMA channel would be invalidated for running
* streams but not for streams that were in the PAUSED
* state during suspend. So invalidate it here before setting
* the dai config in the DSP.
*/
if (config->type == SOF_DAI_INTEL_HDA)
config->hda.link_dma_ch = DMA_CHAN_INVALID;
}
ret = sof_widget_setup(sdev, swidget);
if (ret < 0)
return ret;
}
/* restore pipeline connections */
list_for_each_entry(sroute, &sdev->route_list, list) {
/* only set up routes belonging to static pipelines */
if (!verify && (sroute->src_widget->dynamic_pipeline_widget ||
sroute->sink_widget->dynamic_pipeline_widget))
continue;
/*
* For virtual routes, both sink and source are not buffer. IPC3 only supports
* connections between a buffer and a component. Ignore the rest.
*/
if (sroute->src_widget->id != snd_soc_dapm_buffer &&
sroute->sink_widget->id != snd_soc_dapm_buffer)
continue;
ret = sof_route_setup(sdev, sroute->src_widget->widget,
sroute->sink_widget->widget);
if (ret < 0) {
dev_err(sdev->dev, "%s: route set up failed\n", __func__);
return ret;
}
}
/* complete pipeline */
list_for_each_entry(swidget, &sdev->widget_list, list) {
switch (swidget->id) {
case snd_soc_dapm_scheduler:
/* only complete static pipelines */
if (!verify && swidget->dynamic_pipeline_widget)
continue;
if (v->abi_version < SOF_ABI_VER(3, 19, 0)) {
ret = sof_widget_setup(sdev, swidget);
if (ret < 0)
return ret;
}
swidget->complete = sof_ipc3_complete_pipeline(sdev, swidget);
if (swidget->complete < 0)
return swidget->complete;
break;
default:
break;
}
}
return 0;
}
/*
* Free the PCM, its associated widgets and set the prepared flag to false for all PCMs that
* did not get suspended(ex: paused streams) so the widgets can be set up again during resume.
*/
static int sof_tear_down_left_over_pipelines(struct snd_sof_dev *sdev)
{
struct snd_sof_widget *swidget;
struct snd_sof_pcm *spcm;
int dir, ret;
/*
* free all PCMs and their associated DAPM widgets if their connected DAPM widget
* list is not NULL. This should only be true for paused streams at this point.
* This is equivalent to the handling of FE DAI suspend trigger for running streams.
*/
list_for_each_entry(spcm, &sdev->pcm_list, list) {
for_each_pcm_streams(dir) {
struct snd_pcm_substream *substream = spcm->stream[dir].substream;
if (!substream || !substream->runtime)
continue;
if (spcm->stream[dir].list) {
ret = sof_pcm_stream_free(sdev, substream, spcm, dir, true);
if (ret < 0)
return ret;
}
}
}
/*
* free any left over DAI widgets. This is equivalent to the handling of suspend trigger
* for the BE DAI for running streams.
*/
list_for_each_entry(swidget, &sdev->widget_list, list)
if (WIDGET_IS_DAI(swidget->id) && swidget->use_count == 1) {
ret = sof_widget_free(sdev, swidget);
if (ret < 0)
return ret;
}
return 0;
}
/*
* For older firmware, this function doesn't free widgets for static pipelines during suspend.
* It only resets use_count for all widgets.
*/
static int sof_ipc3_tear_down_all_pipelines(struct snd_sof_dev *sdev, bool verify)
{
struct sof_ipc_fw_version *v = &sdev->fw_ready.version;
struct snd_sof_widget *swidget;
struct snd_sof_route *sroute;
int ret;
/*
* This function is called during suspend and for one-time topology verification during
* first boot. In both cases, there is no need to protect swidget->use_count and
* sroute->setup because during suspend all running streams are suspended and during
* topology loading the sound card unavailable to open PCMs.
*/
list_for_each_entry(swidget, &sdev->widget_list, list) {
if (swidget->dynamic_pipeline_widget)
continue;
/* Do not free widgets for static pipelines with FW ABI older than 3.19 */
if (!verify && !swidget->dynamic_pipeline_widget &&
v->abi_version < SOF_ABI_VER(3, 19, 0)) {
swidget->use_count = 0;
swidget->complete = 0;
continue;
}
ret = sof_widget_free(sdev, swidget);
if (ret < 0)
return ret;
}
/*
* Tear down all pipelines associated with PCMs that did not get suspended
* and unset the prepare flag so that they can be set up again during resume.
* Skip this step for older firmware.
*/
if (!verify && v->abi_version >= SOF_ABI_VER(3, 19, 0)) {
ret = sof_tear_down_left_over_pipelines(sdev);
if (ret < 0) {
dev_err(sdev->dev, "failed to tear down paused pipelines\n");
return ret;
}
}
list_for_each_entry(sroute, &sdev->route_list, list)
sroute->setup = false;
return 0;
}
/* token list for each topology object */
static enum sof_tokens host_token_list[] = {
SOF_CORE_TOKENS,
......@@ -2164,4 +2359,6 @@ const struct sof_ipc_tplg_ops ipc3_tplg_ops = {
.widget_free = sof_ipc3_widget_free,
.widget_setup = sof_ipc3_widget_setup,
.dai_config = sof_ipc3_dai_config,
.set_up_all_pipelines = sof_ipc3_set_up_all_pipelines,
.tear_down_all_pipelines = sof_ipc3_tear_down_all_pipelines,
};
......@@ -71,6 +71,7 @@ static int sof_resume(struct device *dev, bool runtime_resume)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
const struct sof_ipc_pm_ops *pm_ops = sdev->ipc->ops->pm;
const struct sof_ipc_tplg_ops *tplg_ops = sdev->ipc->ops->tplg;
u32 old_state = sdev->dsp_power_state.state;
int ret;
......@@ -144,12 +145,12 @@ static int sof_resume(struct device *dev, bool runtime_resume)
}
/* restore pipelines */
ret = sof_set_up_pipelines(sdev, false);
if (ret < 0) {
dev_err(sdev->dev,
"error: failed to restore pipeline after resume %d\n",
ret);
return ret;
if (tplg_ops->set_up_all_pipelines) {
ret = tplg_ops->set_up_all_pipelines(sdev, false);
if (ret < 0) {
dev_err(sdev->dev, "Failed to restore pipeline after resume %d\n", ret);
return ret;
}
}
/* Notify clients not managed by pm framework about core resume */
......@@ -169,6 +170,7 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
const struct sof_ipc_pm_ops *pm_ops = sdev->ipc->ops->pm;
const struct sof_ipc_tplg_ops *tplg_ops = sdev->ipc->ops->tplg;
pm_message_t pm_state;
u32 target_state = 0;
int ret;
......@@ -204,7 +206,8 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
goto suspend;
}
sof_tear_down_pipelines(sdev, false);
if (tplg_ops->tear_down_all_pipelines)
tplg_ops->tear_down_all_pipelines(sdev, false);
/* release trace */
snd_sof_release_trace(sdev);
......
......@@ -498,96 +498,6 @@ int sof_set_hw_params_upon_resume(struct device *dev)
return snd_sof_dsp_hw_params_upon_resume(sdev);
}
int sof_set_up_pipelines(struct snd_sof_dev *sdev, bool verify)
{
const struct sof_ipc_tplg_ops *ipc_tplg_ops = sdev->ipc->ops->tplg;
struct sof_ipc_fw_version *v = &sdev->fw_ready.version;
struct snd_sof_widget *swidget;
struct snd_sof_route *sroute;
int ret;
/* restore pipeline components */
list_for_each_entry(swidget, &sdev->widget_list, list) {
/* only set up the widgets belonging to static pipelines */
if (!verify && swidget->dynamic_pipeline_widget)
continue;
/*
* For older firmware, skip scheduler widgets in this loop,
* sof_widget_setup() will be called in the 'complete pipeline' loop
*/
if (v->abi_version < SOF_ABI_VER(3, 19, 0) &&
swidget->id == snd_soc_dapm_scheduler)
continue;
/* update DAI config. The IPC will be sent in sof_widget_setup() */
if (WIDGET_IS_DAI(swidget->id)) {
struct snd_sof_dai *dai = swidget->private;
struct sof_dai_private_data *private = dai->private;
struct sof_ipc_dai_config *config;
if (!dai || !private || !private->dai_config)
continue;
config = private->dai_config;
/*
* The link DMA channel would be invalidated for running
* streams but not for streams that were in the PAUSED
* state during suspend. So invalidate it here before setting
* the dai config in the DSP.
*/
if (config->type == SOF_DAI_INTEL_HDA)
config->hda.link_dma_ch = DMA_CHAN_INVALID;
}
ret = sof_widget_setup(sdev, swidget);
if (ret < 0)
return ret;
}
/* restore pipeline connections */
list_for_each_entry(sroute, &sdev->route_list, list) {
/* only set up routes belonging to static pipelines */
if (!verify && (sroute->src_widget->dynamic_pipeline_widget ||
sroute->sink_widget->dynamic_pipeline_widget))
continue;
ret = ipc_tplg_ops->route_setup(sdev, sroute);
if (ret < 0) {
dev_err(sdev->dev, "%s: restore pipeline connections failed\n", __func__);
return ret;
}
}
/* complete pipeline */
list_for_each_entry(swidget, &sdev->widget_list, list) {
switch (swidget->id) {
case snd_soc_dapm_scheduler:
/* only complete static pipelines */
if (!verify && swidget->dynamic_pipeline_widget)
continue;
if (v->abi_version < SOF_ABI_VER(3, 19, 0)) {
ret = sof_widget_setup(sdev, swidget);
if (ret < 0)
return ret;
}
if (ipc_tplg_ops->pipeline_complete) {
swidget->complete = ipc_tplg_ops->pipeline_complete(sdev, swidget);
if (swidget->complete < 0)
return swidget->complete;
}
break;
default:
break;
}
}
return 0;
}
int sof_pcm_stream_free(struct snd_sof_dev *sdev, struct snd_pcm_substream *substream,
struct snd_sof_pcm *spcm, int dir, bool free_widget_list)
{
......@@ -618,102 +528,6 @@ int sof_pcm_stream_free(struct snd_sof_dev *sdev, struct snd_pcm_substream *subs
return ret;
}
/*
* Free the PCM, its associated widgets and set the prepared flag to false for all PCMs that
* did not get suspended(ex: paused streams) so the widgets can be set up again during resume.
*/
static int sof_tear_down_left_over_pipelines(struct snd_sof_dev *sdev)
{
struct snd_sof_widget *swidget;
struct snd_sof_pcm *spcm;
int dir, ret;
/*
* free all PCMs and their associated DAPM widgets if their connected DAPM widget
* list is not NULL. This should only be true for paused streams at this point.
* This is equivalent to the handling of FE DAI suspend trigger for running streams.
*/
list_for_each_entry(spcm, &sdev->pcm_list, list)
for_each_pcm_streams(dir) {
struct snd_pcm_substream *substream = spcm->stream[dir].substream;
if (!substream || !substream->runtime)
continue;
if (spcm->stream[dir].list) {
ret = sof_pcm_stream_free(sdev, substream, spcm, dir, true);
if (ret < 0)
return ret;
}
}
/*
* free any left over DAI widgets. This is equivalent to the handling of suspend trigger
* for the BE DAI for running streams.
*/
list_for_each_entry(swidget, &sdev->widget_list, list)
if (WIDGET_IS_DAI(swidget->id) && swidget->use_count == 1) {
ret = sof_widget_free(sdev, swidget);
if (ret < 0)
return ret;
}
return 0;
}
/*
* For older firmware, this function doesn't free widgets for static pipelines during suspend.
* It only resets use_count for all widgets.
*/
int sof_tear_down_pipelines(struct snd_sof_dev *sdev, bool verify)
{
struct sof_ipc_fw_version *v = &sdev->fw_ready.version;
struct snd_sof_widget *swidget;
struct snd_sof_route *sroute;
int ret;
/*
* This function is called during suspend and for one-time topology verification during
* first boot. In both cases, there is no need to protect swidget->use_count and
* sroute->setup because during suspend all running streams are suspended and during
* topology loading the sound card unavailable to open PCMs.
*/
list_for_each_entry(swidget, &sdev->widget_list, list) {
if (swidget->dynamic_pipeline_widget)
continue;
/* Do not free widgets for static pipelines with FW ABI older than 3.19 */
if (!verify && !swidget->dynamic_pipeline_widget &&
v->abi_version < SOF_ABI_VER(3, 19, 0)) {
swidget->use_count = 0;
swidget->complete = 0;
continue;
}
ret = sof_widget_free(sdev, swidget);
if (ret < 0)
return ret;
}
/*
* Tear down all pipelines associated with PCMs that did not get suspended
* and unset the prepare flag so that they can be set up again during resume.
* Skip this step for older firmware.
*/
if (!verify && v->abi_version >= SOF_ABI_VER(3, 19, 0)) {
ret = sof_tear_down_left_over_pipelines(sdev);
if (ret < 0) {
dev_err(sdev->dev, "failed to tear down paused pipelines\n");
return ret;
}
}
list_for_each_entry(sroute, &sdev->route_list, list)
sroute->setup = false;
return 0;
}
/*
* Generic object lookup APIs.
*/
......
......@@ -117,6 +117,8 @@ struct sof_ipc_tplg_widget_ops {
* @widget_setup: Function pointer for setting up setup in the DSP
* @widget_free: Function pointer for freeing widget in the DSP
* @dai_config: Function pointer for sending DAI config IPC to the DSP
* @set_up_all_pipelines: Function pointer for setting up all topology pipelines
* @tear_down_all_pipelines: Function pointer for tearing down all topology pipelines
*/
struct sof_ipc_tplg_ops {
const struct sof_ipc_tplg_widget_ops *widget;
......@@ -130,6 +132,8 @@ struct sof_ipc_tplg_ops {
int (*widget_free)(struct snd_sof_dev *sdev, struct snd_sof_widget *swidget);
int (*dai_config)(struct snd_sof_dev *sdev, struct snd_sof_widget *swidget,
unsigned int flags, struct snd_sof_dai_config_data *data);
int (*set_up_all_pipelines)(struct snd_sof_dev *sdev, bool verify);
int (*tear_down_all_pipelines)(struct snd_sof_dev *sdev, bool verify);
};
/** struct snd_sof_tuple - Tuple info
......@@ -429,8 +433,6 @@ int snd_sof_ipc_set_get_comp_data(struct snd_sof_control *scontrol, bool set);
int sof_pcm_dai_link_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_pcm_hw_params *params);
/* PM */
int sof_set_up_pipelines(struct snd_sof_dev *sdev, bool verify);
int sof_tear_down_pipelines(struct snd_sof_dev *sdev, bool verify);
int sof_set_hw_params_upon_resume(struct device *dev);
bool snd_sof_stream_suspend_ignored(struct snd_sof_dev *sdev);
bool snd_sof_dsp_only_d0i3_compatible_stream_active(struct snd_sof_dev *sdev);
......
......@@ -1796,29 +1796,15 @@ static int sof_route_load(struct snd_soc_component *scomp, int index,
sink_swidget->id == snd_soc_dapm_output)
goto err;
/*
* For virtual routes, both sink and source are not
* buffer. Since only buffer linked to component is supported by
* FW, others are reported as error, add check in route function,
* do not send it to FW when both source and sink are not buffer
*/
if (source_swidget->id != snd_soc_dapm_buffer &&
sink_swidget->id != snd_soc_dapm_buffer) {
dev_dbg(scomp->dev, "warning: neither Linked source component %s nor sink component %s is of buffer type, ignoring link\n",
route->source, route->sink);
goto err;
} else {
sroute->route = route;
dobj->private = sroute;
sroute->src_widget = source_swidget;
sroute->sink_widget = sink_swidget;
/* add route to route list */
list_add(&sroute->list, &sdev->route_list);
sroute->route = route;
dobj->private = sroute;
sroute->src_widget = source_swidget;
sroute->sink_widget = sink_swidget;
return 0;
}
/* add route to route list */
list_add(&sroute->list, &sdev->route_list);
return 0;
err:
kfree(sroute);
return ret;
......@@ -1917,21 +1903,28 @@ static int sof_complete(struct snd_soc_component *scomp)
/* verify topology components loading including dynamic pipelines */
if (sof_debug_check_flag(SOF_DBG_VERIFY_TPLG)) {
ret = sof_set_up_pipelines(sdev, true);
if (ret < 0) {
dev_err(sdev->dev, "error: topology verification failed %d\n", ret);
return ret;
}
if (ipc_tplg_ops->set_up_all_pipelines && ipc_tplg_ops->tear_down_all_pipelines) {
ret = ipc_tplg_ops->set_up_all_pipelines(sdev, true);
if (ret < 0) {
dev_err(sdev->dev, "Failed to set up all topology pipelines: %d\n",
ret);
return ret;
}
ret = sof_tear_down_pipelines(sdev, true);
if (ret < 0) {
dev_err(sdev->dev, "error: topology tear down pipelines failed %d\n", ret);
return ret;
ret = ipc_tplg_ops->tear_down_all_pipelines(sdev, true);
if (ret < 0) {
dev_err(sdev->dev, "Failed to tear down topology pipelines: %d\n",
ret);
return ret;
}
}
}
/* set up static pipelines */
return sof_set_up_pipelines(sdev, false);
if (ipc_tplg_ops->set_up_all_pipelines)
return ipc_tplg_ops->set_up_all_pipelines(sdev, false);
return 0;
}
/* manifest - optional to inform component of manifest */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment