Merge tag 'zynq-dt-for-3.14' of git://git.xilinx.com/linux-xlnx into next/dt

From Michal Simek:

arm: Xilinx Zynq dt patches for v3.14

- Add gem support
- Add cpus node
- TTC cleanup

* tag 'zynq-dt-for-3.14' of git://git.xilinx.com/linux-xlnx:
  arm: dt: zynq: Add 'cpus' node
  arm: dt: zynq: Remove 'clock-ranges' from TTC nodes
  ARM: zynq: add gem support
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/zynq-7000.dtsi

@@ -15,6 +15,25 @@
 / {
 	compatible = "xlnx,zynq-7000";
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clkc 3>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clkc 3>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <0 5 4>, <0 6 4>;
@@ -65,6 +84,24 @@ uart1: uart@e0001000 {
 			interrupts = <0 50 4>;
 		};
 
+		gem0: ethernet@e000b000 {
+			compatible = "cdns,gem";
+			reg = <0xe000b000 0x4000>;
+			status = "disabled";
+			interrupts = <0 22 4>;
+			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+			clock-names = "pclk", "hclk", "tx_clk";
+		};
+
+		gem1: ethernet@e000c000 {
+			compatible = "cdns,gem";
+			reg = <0xe000c000 0x4000>;
+			status = "disabled";
+			interrupts = <0 45 4>;
+			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
+			clock-names = "pclk", "hclk", "tx_clk";
+		};
+
 		slcr: slcr@f8000000 {
 			compatible = "xlnx,zynq-slcr";
 			reg = <0xF8000000 0x1000>;
@@ -106,7 +143,6 @@ ttc0: ttc0@f8001000 {
 			compatible = "cdns,ttc";
 			clocks = <&clkc 6>;
 			reg = <0xF8001000 0x1000>;
-			clock-ranges;
 		};
 
 		ttc1: ttc1@f8002000 {
@@ -115,7 +151,6 @@ ttc1: ttc1@f8002000 {
 			compatible = "cdns,ttc";
 			clocks = <&clkc 6>;
 			reg = <0xF8002000 0x1000>;
-			clock-ranges;
 		};
 		scutimer: scutimer@f8f00600 {
 			interrupt-parent = <&intc>;

arch/arm/boot/dts/zynq-zc702.dts

@@ -29,6 +29,11 @@ chosen {
 
 };
 
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
 &uart1 {
 	status = "okay";
 };

arch/arm/boot/dts/zynq-zc706.dts

@@ -30,6 +30,11 @@ chosen {
 
 };
 
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
 &uart1 {
 	status = "okay";
 };

arch/arm/boot/dts/zynq-zed.dts

@@ -30,6 +30,11 @@ chosen {
 
 };
 
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
 &uart1 {
 	status = "okay";
 };