Commit 31f9a421 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Linus Walleij

pinctrl: Introduce MODE group in enum pin_config_param

Better to have a MODE group of settings to keep them together
when ordered alphabetically. Hence, rename PIN_CONFIG_LOW_POWER_MODE
to PIN_CONFIG_MODE_LOW_POWER.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210412140741.39946-2-andriy.shevchenko@linux.intel.comSigned-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 1de15e99
......@@ -43,7 +43,7 @@ static const struct pin_config_item conf_items[] = {
PCONFDUMP(PIN_CONFIG_INPUT_ENABLE, "input enabled", NULL, false),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL, false),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL, false),
PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true),
PCONFDUMP(PIN_CONFIG_MODE_LOW_POWER, "pin low power", "mode", true),
PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false),
PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
......@@ -174,8 +174,8 @@ static const struct pinconf_generic_params dt_params[] = {
{ "input-schmitt", PIN_CONFIG_INPUT_SCHMITT, 0 },
{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
{ "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 },
{ "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 },
{ "low-power-disable", PIN_CONFIG_MODE_LOW_POWER, 0 },
{ "low-power-enable", PIN_CONFIG_MODE_LOW_POWER, 1 },
{ "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 },
{ "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 },
{ "output-high", PIN_CONFIG_OUTPUT, 1, },
......
......@@ -646,7 +646,7 @@ static const struct pin_config_item lpc18xx_conf_items[ARRAY_SIZE(lpc18xx_params
static int lpc18xx_pconf_get_usb1(enum pin_config_param param, int *arg, u32 reg)
{
switch (param) {
case PIN_CONFIG_LOW_POWER_MODE:
case PIN_CONFIG_MODE_LOW_POWER:
if (reg & LPC18XX_SCU_USB1_EPWR)
*arg = 0;
else
......@@ -904,7 +904,7 @@ static int lpc18xx_pconf_set_usb1(struct pinctrl_dev *pctldev,
u32 param_val, u32 *reg)
{
switch (param) {
case PIN_CONFIG_LOW_POWER_MODE:
case PIN_CONFIG_MODE_LOW_POWER:
if (param_val)
*reg &= ~LPC18XX_SCU_USB1_EPWR;
else
......
......@@ -533,7 +533,7 @@ static int pcs_pinconf_get(struct pinctrl_dev *pctldev,
break;
case PIN_CONFIG_DRIVE_STRENGTH:
case PIN_CONFIG_SLEW_RATE:
case PIN_CONFIG_LOW_POWER_MODE:
case PIN_CONFIG_MODE_LOW_POWER:
default:
*config = data;
break;
......@@ -571,7 +571,7 @@ static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
case PIN_CONFIG_INPUT_SCHMITT:
case PIN_CONFIG_DRIVE_STRENGTH:
case PIN_CONFIG_SLEW_RATE:
case PIN_CONFIG_LOW_POWER_MODE:
case PIN_CONFIG_MODE_LOW_POWER:
shift = ffs(func->conf[i].mask) - 1;
data &= ~func->conf[i].mask;
data |= (arg << shift) & func->conf[i].mask;
......@@ -919,7 +919,7 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
{ "pinctrl-single,drive-strength", PIN_CONFIG_DRIVE_STRENGTH, },
{ "pinctrl-single,slew-rate", PIN_CONFIG_SLEW_RATE, },
{ "pinctrl-single,input-schmitt", PIN_CONFIG_INPUT_SCHMITT, },
{ "pinctrl-single,low-power-mode", PIN_CONFIG_LOW_POWER_MODE, },
{ "pinctrl-single,low-power-mode", PIN_CONFIG_MODE_LOW_POWER, },
};
static const struct pcs_conf_type prop4[] = {
{ "pinctrl-single,bias-pullup", PIN_CONFIG_BIAS_PULL_UP, },
......
......@@ -1016,7 +1016,7 @@ static int zynq_pinconf_cfg_get(struct pinctrl_dev *pctldev,
case PIN_CONFIG_SLEW_RATE:
arg = !!(reg & ZYNQ_PINCONF_SPEED);
break;
case PIN_CONFIG_LOW_POWER_MODE:
case PIN_CONFIG_MODE_LOW_POWER:
{
enum zynq_io_standards iostd = zynq_pinconf_iostd_get(reg);
......@@ -1087,7 +1087,7 @@ static int zynq_pinconf_cfg_set(struct pinctrl_dev *pctldev,
reg &= ~ZYNQ_PINCONF_IOTYPE_MASK;
reg |= arg << ZYNQ_PINCONF_IOTYPE_SHIFT;
break;
case PIN_CONFIG_LOW_POWER_MODE:
case PIN_CONFIG_MODE_LOW_POWER:
if (arg)
reg |= ZYNQ_PINCONF_DISABLE_RECVR;
else
......
......@@ -194,7 +194,7 @@ static int pxa2xx_pconf_group_get(struct pinctrl_dev *pctldev,
spin_lock_irqsave(&pctl->lock, flags);
val = readl_relaxed(pgsr) & BIT(pin % 32);
*config = val ? PIN_CONFIG_LOW_POWER_MODE : 0;
*config = val ? PIN_CONFIG_MODE_LOW_POWER : 0;
spin_unlock_irqrestore(&pctl->lock, flags);
dev_dbg(pctl->dev, "get sleep gpio state(pin=%d) %d\n",
......@@ -217,7 +217,7 @@ static int pxa2xx_pconf_group_set(struct pinctrl_dev *pctldev,
for (i = 0; i < num_configs; i++) {
switch (pinconf_to_config_param(configs[i])) {
case PIN_CONFIG_LOW_POWER_MODE:
case PIN_CONFIG_MODE_LOW_POWER:
is_set = pinconf_to_config_argument(configs[i]);
break;
default:
......
......@@ -1738,7 +1738,7 @@ static int tegra_io_pad_pinconf_get(struct pinctrl_dev *pctl_dev,
arg = ret;
break;
case PIN_CONFIG_LOW_POWER_MODE:
case PIN_CONFIG_MODE_LOW_POWER:
ret = tegra_io_pad_is_powered(pmc, pad->id);
if (ret < 0)
return ret;
......@@ -1775,7 +1775,7 @@ static int tegra_io_pad_pinconf_set(struct pinctrl_dev *pctl_dev,
arg = pinconf_to_config_argument(configs[i]);
switch (param) {
case PIN_CONFIG_LOW_POWER_MODE:
case PIN_CONFIG_MODE_LOW_POWER:
if (arg)
err = tegra_io_pad_power_disable(pad->id);
else
......
......@@ -76,7 +76,7 @@ struct pinctrl_map;
* @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin.
* If the argument != 0, schmitt-trigger mode is enabled. If it's 0,
* schmitt-trigger mode is disabled.
* @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power
* @PIN_CONFIG_MODE_LOW_POWER: this will configure the pin for low power
* operation, if several modes of operation are supported these can be
* passed in the argument on a custom form, else just use argument 1
* to indicate low power mode, argument 0 turns low power mode off.
......@@ -124,7 +124,7 @@ enum pin_config_param {
PIN_CONFIG_INPUT_ENABLE,
PIN_CONFIG_INPUT_SCHMITT,
PIN_CONFIG_INPUT_SCHMITT_ENABLE,
PIN_CONFIG_LOW_POWER_MODE,
PIN_CONFIG_MODE_LOW_POWER,
PIN_CONFIG_OUTPUT_ENABLE,
PIN_CONFIG_OUTPUT,
PIN_CONFIG_PERSIST_STATE,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment