Commit 32064503 authored by Mark Brown's avatar Mark Brown Committed by Samuel Ortiz

mfd: Support active high IRQs on WM835x

Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@openedhand.com>
parent 9dfd3381
...@@ -1438,7 +1438,21 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, ...@@ -1438,7 +1438,21 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
mutex_init(&wm8350->irq_mutex); mutex_init(&wm8350->irq_mutex);
INIT_WORK(&wm8350->irq_work, wm8350_irq_worker); INIT_WORK(&wm8350->irq_work, wm8350_irq_worker);
if (irq) { if (irq) {
ret = request_irq(irq, wm8350_irq, 0, int flags = 0;
if (pdata && pdata->irq_high) {
flags |= IRQF_TRIGGER_HIGH;
wm8350_set_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
WM8350_IRQ_POL);
} else {
flags |= IRQF_TRIGGER_LOW;
wm8350_clear_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
WM8350_IRQ_POL);
}
ret = request_irq(irq, wm8350_irq, flags,
"wm8350", wm8350); "wm8350", wm8350);
if (ret != 0) { if (ret != 0) {
dev_err(wm8350->dev, "Failed to request IRQ: %d\n", dev_err(wm8350->dev, "Failed to request IRQ: %d\n",
......
...@@ -640,9 +640,11 @@ struct wm8350 { ...@@ -640,9 +640,11 @@ struct wm8350 {
* *
* @init: Function called during driver initialisation. Should be * @init: Function called during driver initialisation. Should be
* used by the platform to configure GPIO functions and similar. * used by the platform to configure GPIO functions and similar.
* @irq_high: Set if WM8350 IRQ is active high.
*/ */
struct wm8350_platform_data { struct wm8350_platform_data {
int (*init)(struct wm8350 *wm8350); int (*init)(struct wm8350 *wm8350);
int irq_high;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment