staging: rtl8188eu: clean up block comment style issues

Clean up block comment style issues to follow kernel coding style
and clear checkpatch warnings.

WARNING: Block comments should align the * on each line
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200919090040.9613-1-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/core/rtw_mlme.c

@@ -1894,9 +1894,9 @@ unsigned int rtw_restructure_ht_ie(struct adapter *padapter, u8 *in_ie, u8 *out_
 		rtw_hal_get_def_var(padapter, HAL_DEF_MAX_RECVBUF_SZ, &max_recvbuf_sz);
 
 		/*
-		ampdu_params_info [1:0]:Max AMPDU Len => 0:8k , 1:16k, 2:32k, 3:64k
-		ampdu_params_info [4:2]:Min MPDU Start Spacing
-		*/
+		 * ampdu_params_info [1:0]:Max AMPDU Len => 0:8k , 1:16k, 2:32k, 3:64k
+		 * ampdu_params_info [4:2]:Min MPDU Start Spacing
+		 */
 
 		rtw_hal_get_def_var(padapter, HW_VAR_MAX_RX_AMPDU_FACTOR, &max_rx_ampdu_factor);
 		ht_cap.ampdu_params_info = max_rx_ampdu_factor & 0x03;

drivers/staging/rtl8188eu/core/rtw_mlme_ext.c

@@ -19,9 +19,7 @@
 
 static u8 null_addr[ETH_ALEN] = {};
 
-/**************************************************
-OUI definitions for the vendor specific IE
-***************************************************/
+/* OUI definitions for the vendor specific IE */
 const u8 RTW_WPA_OUI[] = {0x00, 0x50, 0xf2, 0x01};
 const u8 WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
 static const u8 WMM_OUI[] = {0x00, 0x50, 0xf2, 0x02};
@@ -32,17 +30,13 @@ static const u8 WMM_PARA_OUI[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01};
 const u8 WPA_TKIP_CIPHER[4] = {0x00, 0x50, 0xf2, 0x02};
 const u8 RSN_TKIP_CIPHER[4] = {0x00, 0x0f, 0xac, 0x02};
 
-/********************************************************
-MCS rate definitions
-*********************************************************/
+/* MCS rate definitions */
 const u8 MCS_rate_1R[16] = {
 	0xff, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-/********************************************************
-ChannelPlan definitions
-*********************************************************/
+/* ChannelPlan definitions */
 static struct rt_channel_plan_2g RTW_ChannelPlan2G[RT_CHANNEL_DOMAIN_2G_MAX] = {
 	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13},		/*  0x00, RT_CHANNEL_DOMAIN_2G_WORLD , Passive scan CH 12, 13 */
 	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13},		/*  0x01, RT_CHANNEL_DOMAIN_2G_ETSI1 */

drivers/staging/rtl8188eu/core/rtw_pwrctrl.c

@@ -530,11 +530,11 @@ void rtw_init_pwrctrl_priv(struct adapter *padapter)
 }
 
 /*
-* rtw_pwr_wakeup - Wake the NIC up from: 1)IPS. 2)USB autosuspend
-* @adapter: pointer to struct adapter structure
-* @ips_deffer_ms: the ms will prevent from falling into IPS after wakeup
-* Return _SUCCESS or _FAIL
-*/
+ * rtw_pwr_wakeup - Wake the NIC up from: 1)IPS. 2)USB autosuspend
+ * @adapter: pointer to struct adapter structure
+ * @ips_deffer_ms: the ms will prevent from falling into IPS after wakeup
+ * Return _SUCCESS or _FAIL
+ */
 
 int _rtw_pwr_wakeup(struct adapter *padapter, u32 ips_deffer_ms, const char *caller)
 {

drivers/staging/rtl8188eu/os_dep/ioctl_linux.c

@@ -1813,9 +1813,7 @@ static int rtw_wx_set_auth(struct net_device *dev,
 
 		break;
 	case IW_AUTH_80211_AUTH_ALG:
-		/*
-		 *  It's the starting point of a link layer connection using wpa_supplicant
-		*/
+		/* It's the starting point of a link layer connection using wpa_supplicant */
 		if (check_fwstate(&padapter->mlmepriv, _FW_LINKED)) {
 			LeaveAllPowerSaveMode(padapter);
 			rtw_disassoc_cmd(padapter, 500, false);
@@ -2775,9 +2773,9 @@ static int rtw_hostapd_ioctl(struct net_device *dev, struct iw_point *p)
 	struct adapter *padapter = rtw_netdev_priv(dev);
 
 	/*
-	* this function is expect to call in master mode, which allows no power saving
-	* so, we just check hw_init_completed
-	*/
+	 * this function is expect to call in master mode, which allows no power saving
+	 * so, we just check hw_init_completed
+	 */
 
 	if (!padapter->hw_init_completed)
 		return -EPERM;

drivers/staging/rtl8188eu/os_dep/usb_intf.c

@@ -126,7 +126,8 @@ static void usb_dvobj_deinit(struct usb_interface *usb_intf)
 				 * remove/insert module, driver fails
 				 * on sitesurvey for the first time when
 				 * device is up . Reset usb port for sitesurvey
-				 * fail issue. */
+				 * fail issue.
+				 */
 				pr_debug("usb attached..., try to reset usb device\n");
 				usb_reset_device(interface_to_usbdev(usb_intf));
 			}
@@ -383,8 +384,7 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
 	}
 #endif
 
-	/* 2012-07-11 Move here to prevent the 8723AS-VAU BT auto
-	 * suspend influence */
+	/* 2012-07-11 Move here to prevent the 8723AS-VAU BT auto suspend influence */
 	if (usb_autopm_get_interface(pusb_intf) < 0)
 		pr_debug("can't get autopm:\n");
 
@@ -479,8 +479,9 @@ static int rtw_drv_init(struct usb_interface *pusb_intf, const struct usb_device
 
 /*
  * dev_remove() - our device is being removed
-*/
-/* rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove() => how to recognize both */
+ *
+ * rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove() => how to recognize both
+ */
 static void rtw_dev_remove(struct usb_interface *pusb_intf)
 {
 	struct dvobj_priv *dvobj = usb_get_intfdata(pusb_intf);