Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
Please pull these fixes for the 3.14 stream!

For the iwlwifi fix, Emmanuel says:

"A critical bug has been reported on all NICs supported by iwldvm.
iwlwifi would simply panic upon interface up This patch fixes this. The
offending code is by me and is present in wireless-next.git and hence in
net-next.git."

Along with that...

Andreas Fenkart corrects a WoWLAN problem with mwifiex.

Roman Dubtsov adds a device ID to rt2800usb.

Sujith Manoharan re-enables a mistakenly commented-out line of code in
ath9k, and also fixes and interrupt mitigation issue for that driver.

ZHAO Gang fixes an incorrect assignment (reverse/wrong API call) in b43.

Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wireless/ath/ath9k/hw.c

@@ -358,6 +358,14 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
 
 	ah->config.rx_intr_mitigation = true;
 
+	if (AR_SREV_9300_20_OR_LATER(ah)) {
+		ah->config.rimt_last = 500;
+		ah->config.rimt_first = 2000;
+	} else {
+		ah->config.rimt_last = 250;
+		ah->config.rimt_first = 700;
+	}
+
 	/*
 	 * We need this for PCI devices only (Cardbus, PCI, miniPCI)
 	 * _and_ if on non-uniprocessor systems (Multiprocessor/HT).
@@ -1876,8 +1884,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		REG_WRITE(ah, AR_OBS, 8);
 
 	if (ah->config.rx_intr_mitigation) {
-		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500);
-		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, 2000);
+		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, ah->config.rimt_last);
+		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, ah->config.rimt_first);
 	}
 
 	if (ah->config.tx_intr_mitigation) {

drivers/net/wireless/ath/ath9k/hw.h

@@ -310,6 +310,8 @@ struct ath9k_ops_config {
 	u8 max_txtrig_level;
 	u16 ani_poll_interval; /* ANI poll interval in ms */
 	u16 hw_hang_checks;
+	u16 rimt_first;
+	u16 rimt_last;
 
 	/* Platform specific config */
 	u32 aspm_l1_fix;

drivers/net/wireless/ath/ath9k/main.c

@@ -524,7 +524,7 @@ void ath9k_tasklet(unsigned long data)
 			 * successfully after a GTT interrupt, the GTT counter
 			 * gets reset to zero here.
 			 */
-			/* sc->gtt_cnt = 0; */
+			sc->gtt_cnt = 0;
 
 			ath_tx_edma_tasklet(sc);
 		} else {

drivers/net/wireless/b43/xmit.c

@@ -821,10 +821,10 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 		 * channel number in b43. */
 		if (chanstat & B43_RX_CHAN_5GHZ) {
 			status.band = IEEE80211_BAND_5GHZ;
-			status.freq = b43_freq_to_channel_5ghz(chanid);
+			status.freq = b43_channel_to_freq_5ghz(chanid);
 		} else {
 			status.band = IEEE80211_BAND_2GHZ;
-			status.freq = b43_freq_to_channel_2ghz(chanid);
+			status.freq = b43_channel_to_freq_2ghz(chanid);
 		}
 		break;
 	default:

drivers/net/wireless/iwlwifi/pcie/tx.c

@@ -289,13 +289,15 @@ static void iwl_pcie_txq_inval_byte_cnt_tbl(struct iwl_trans *trans,
  */
 void iwl_pcie_txq_inc_wr_ptr(struct iwl_trans *trans, struct iwl_txq *txq)
 {
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	u32 reg = 0;
 	int txq_id = txq->q.id;
 
 	if (txq->need_update == 0)
 		return;
 
-	if (trans->cfg->base_params->shadow_reg_enable) {
+	if (trans->cfg->base_params->shadow_reg_enable ||
+	    txq_id == trans_pcie->cmd_queue) {
 		/* shadow register enabled */
 		iwl_write32(trans, HBUS_TARG_WRPTR,
 			    txq->q.write_ptr | (txq_id << 8));

drivers/net/wireless/mwifiex/cfg80211.c

@@ -2449,7 +2449,7 @@ static int mwifiex_cfg80211_suspend(struct wiphy *wiphy,
 		       ETH_ALEN);
 		mef_entry->filter[filt_num].byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] =
 								ETH_ALEN;
-		mef_entry->filter[filt_num].offset = 14;
+		mef_entry->filter[filt_num].offset = 28;
 		mef_entry->filter[filt_num].filt_type = TYPE_EQ;
 		if (filt_num)
 			mef_entry->filter[filt_num].filt_action = TYPE_OR;

drivers/net/wireless/rt2x00/rt2800usb.c

@@ -989,6 +989,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x07d1, 0x3c15) },
 	{ USB_DEVICE(0x07d1, 0x3c16) },
 	{ USB_DEVICE(0x07d1, 0x3c17) },
+	{ USB_DEVICE(0x2001, 0x3317) },
 	{ USB_DEVICE(0x2001, 0x3c1b) },
 	/* Draytek */
 	{ USB_DEVICE(0x07fa, 0x7712) },