[PATCH] USB: move hardware-specific <linux/usb_*.h> to <linux/usb/*.h>

This moves header files for controller-specific platform data
from <linux/usb_XXX.h> to <linux/usb/XXX.h> to start reducing
some clutter.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/host/isp116x-hcd.c

@@ -63,7 +63,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/usb.h>
-#include <linux/usb_isp116x.h>
+#include <linux/usb/isp116x.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>

drivers/usb/host/sl811-hcd.c

@@ -46,7 +46,7 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>

drivers/usb/host/sl811_cs.c

@@ -27,7 +27,7 @@
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
 
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
 
 MODULE_AUTHOR("Botond Botyanszki");
 MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6");

include/linux/usb_sl811.h → include/linux/usb/sl811.h

@@ -14,13 +14,13 @@ struct sl811_platform_data {
 	u8		power;
 
 	/* sl811 relies on an external source of VBUS current */
-	void 		(*port_power)(struct device *dev, int is_on);
+	void		(*port_power)(struct device *dev, int is_on);
 
 	/* pulse sl811 nRST (probably with a GPIO) */
-	void 		(*reset)(struct device *dev);
+	void		(*reset)(struct device *dev);
 
 	// some boards need something like these:
- 	// int 		(*check_overcurrent)(struct device *dev);
- 	// void 	(*clock_enable)(struct device *dev, int is_on);
+	// int		(*check_overcurrent)(struct device *dev);
+	// void		(*clock_enable)(struct device *dev, int is_on);
 };