Commit 32705592 authored by Sudarsana Reddy Kalluru's avatar Sudarsana Reddy Kalluru Committed by David S. Miller

bnx2x: Utilize FW 7.13.11.0.

Commit 8fcf0ec44c11f "bnx2x: Add FW 7.13.11.0" added said .bin FW to
linux-firmware; This patch incorporates the FW in the bnx2x driver.
This introduces few FW fixes and the support for Tx VLAN filtering.

Please consider applying it to 'net-next' tree.
Signed-off-by: default avatarSudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: default avatarAriel Elior <aelior@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1713cb37
......@@ -3024,7 +3024,7 @@ struct afex_stats {
#define BCM_5710_FW_MAJOR_VERSION 7
#define BCM_5710_FW_MINOR_VERSION 13
#define BCM_5710_FW_REVISION_VERSION 1
#define BCM_5710_FW_REVISION_VERSION 11
#define BCM_5710_FW_ENGINEERING_VERSION 0
#define BCM_5710_FW_COMPILE_FLAGS 1
......@@ -3639,8 +3639,10 @@ struct client_init_rx_data {
#define CLIENT_INIT_RX_DATA_TPA_EN_IPV6_SHIFT 1
#define CLIENT_INIT_RX_DATA_TPA_MODE (0x1<<2)
#define CLIENT_INIT_RX_DATA_TPA_MODE_SHIFT 2
#define CLIENT_INIT_RX_DATA_RESERVED5 (0x1F<<3)
#define CLIENT_INIT_RX_DATA_RESERVED5_SHIFT 3
#define CLIENT_INIT_RX_DATA_TPA_OVER_VLAN_DISABLE (0x1<<3)
#define CLIENT_INIT_RX_DATA_TPA_OVER_VLAN_DISABLE_SHIFT 3
#define CLIENT_INIT_RX_DATA_RESERVED5 (0xF<<4)
#define CLIENT_INIT_RX_DATA_RESERVED5_SHIFT 4
u8 vmqueue_mode_en_flg;
u8 extra_data_over_sgl_en_flg;
u8 cache_line_alignment_log_size;
......@@ -3831,7 +3833,7 @@ struct eth_classify_cmd_header {
*/
struct eth_classify_header {
u8 rule_cnt;
u8 reserved0;
u8 warning_on_error;
__le16 reserved1;
__le32 echo;
};
......@@ -4752,6 +4754,8 @@ struct tpa_update_ramrod_data {
__le32 sge_page_base_hi;
__le16 sge_pause_thr_low;
__le16 sge_pause_thr_high;
u8 tpa_over_vlan_disable;
u8 reserved[7];
};
......@@ -4946,7 +4950,7 @@ struct fairness_vars_per_port {
u32 upper_bound;
u32 fair_threshold;
u32 fairness_timeout;
u32 reserved0;
u32 size_thr;
};
/*
......@@ -5415,7 +5419,9 @@ struct function_start_data {
u8 sd_vlan_force_pri_val;
u8 c2s_pri_tt_valid;
u8 c2s_pri_default;
u8 reserved2[6];
u8 tx_vlan_filtering_enable;
u8 tx_vlan_filtering_use_pvid;
u8 reserved2[4];
struct c2s_pri_trans_table_entry c2s_pri_trans_table;
};
......@@ -5448,7 +5454,8 @@ struct function_update_data {
u8 reserved1;
__le16 sd_vlan_tag;
__le16 sd_vlan_eth_type;
__le16 reserved0;
u8 tx_vlan_filtering_pvid_change_flg;
u8 reserved0;
__le32 reserved2;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment