Commit 327dafb1 authored by Arthur Jones's avatar Arthur Jones Committed by Linus Torvalds

edac: core fix redundant sysfs controls to parameters

/sys/devices/system/edac/mc has a few files which are duplicated in
/sys/module/edac_core/parameters.  Now that all the functionality is
duplicated between these two locations, we remove the former kobject
attributes and update the documentation.
Signed-off-by: default avatarArthur Jones <ajones@riverbed.com>
Signed-off-by: default avatarDoug Thompson <dougthompson@xmission.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 096846e2
...@@ -222,74 +222,9 @@ both csrow2 and csrow3 are populated, this indicates a dual ranked ...@@ -222,74 +222,9 @@ both csrow2 and csrow3 are populated, this indicates a dual ranked
set of DIMMs for channels 0 and 1. set of DIMMs for channels 0 and 1.
Within each of the 'mc','mcX' and 'csrowX' directories are several Within each of the 'mcX' and 'csrowX' directories are several
EDAC control and attribute files. EDAC control and attribute files.
============================================================================
DIRECTORY 'mc'
In directory 'mc' are EDAC system overall control and attribute files:
Panic on UE control file:
'edac_mc_panic_on_ue'
An uncorrectable error will cause a machine panic. This is usually
desirable. It is a bad idea to continue when an uncorrectable error
occurs - it is indeterminate what was uncorrected and the operating
system context might be so mangled that continuing will lead to further
corruption. If the kernel has MCE configured, then EDAC will never
notice the UE.
LOAD TIME: module/kernel parameter: panic_on_ue=[0|1]
RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_panic_on_ue
Log UE control file:
'edac_mc_log_ue'
Generate kernel messages describing uncorrectable errors. These errors
are reported through the system message log system. UE statistics
will be accumulated even when UE logging is disabled.
LOAD TIME: module/kernel parameter: log_ue=[0|1]
RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ue
Log CE control file:
'edac_mc_log_ce'
Generate kernel messages describing correctable errors. These
errors are reported through the system message log system.
CE statistics will be accumulated even when CE logging is disabled.
LOAD TIME: module/kernel parameter: log_ce=[0|1]
RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ce
Polling period control file:
'edac_mc_poll_msec'
The time period, in milliseconds, for polling for error information.
Too small a value wastes resources. Too large a value might delay
necessary handling of errors and might loose valuable information for
locating the error. 1000 milliseconds (once each second) is the current
default. Systems which require all the bandwidth they can get, may
increase this.
LOAD TIME: module/kernel parameter: poll_msec=[0|1]
RUN TIME: echo "1000" >/sys/devices/system/edac/mc/edac_mc_poll_msec
============================================================================ ============================================================================
'mcX' DIRECTORIES 'mcX' DIRECTORIES
...@@ -537,7 +472,6 @@ Channel 1 DIMM Label control file: ...@@ -537,7 +472,6 @@ Channel 1 DIMM Label control file:
motherboard specific and determination of this information motherboard specific and determination of this information
must occur in userland at this time. must occur in userland at this time.
============================================================================ ============================================================================
SYSTEM LOGGING SYSTEM LOGGING
...@@ -570,7 +504,6 @@ error type, a notice of "no info" and then an optional, ...@@ -570,7 +504,6 @@ error type, a notice of "no info" and then an optional,
driver-specific error message. driver-specific error message.
============================================================================ ============================================================================
PCI Bus Parity Detection PCI Bus Parity Detection
...@@ -604,6 +537,74 @@ Enable/Disable PCI Parity checking control file: ...@@ -604,6 +537,74 @@ Enable/Disable PCI Parity checking control file:
echo "0" >/sys/devices/system/edac/pci/check_pci_parity echo "0" >/sys/devices/system/edac/pci/check_pci_parity
Parity Count:
'pci_parity_count'
This attribute file will display the number of parity errors that
have been detected.
============================================================================
MODULE PARAMETERS
Panic on UE control file:
'edac_mc_panic_on_ue'
An uncorrectable error will cause a machine panic. This is usually
desirable. It is a bad idea to continue when an uncorrectable error
occurs - it is indeterminate what was uncorrected and the operating
system context might be so mangled that continuing will lead to further
corruption. If the kernel has MCE configured, then EDAC will never
notice the UE.
LOAD TIME: module/kernel parameter: edac_mc_panic_on_ue=[0|1]
RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue
Log UE control file:
'edac_mc_log_ue'
Generate kernel messages describing uncorrectable errors. These errors
are reported through the system message log system. UE statistics
will be accumulated even when UE logging is disabled.
LOAD TIME: module/kernel parameter: edac_mc_log_ue=[0|1]
RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ue
Log CE control file:
'edac_mc_log_ce'
Generate kernel messages describing correctable errors. These
errors are reported through the system message log system.
CE statistics will be accumulated even when CE logging is disabled.
LOAD TIME: module/kernel parameter: edac_mc_log_ce=[0|1]
RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ce
Polling period control file:
'edac_mc_poll_msec'
The time period, in milliseconds, for polling for error information.
Too small a value wastes resources. Too large a value might delay
necessary handling of errors and might loose valuable information for
locating the error. 1000 milliseconds (once each second) is the current
default. Systems which require all the bandwidth they can get, may
increase this.
LOAD TIME: module/kernel parameter: edac_mc_poll_msec=[0|1]
RUN TIME: echo "1000" > /sys/module/edac_core/parameters/edac_mc_poll_msec
Panic on PCI PARITY Error: Panic on PCI PARITY Error:
...@@ -614,21 +615,13 @@ Panic on PCI PARITY Error: ...@@ -614,21 +615,13 @@ Panic on PCI PARITY Error:
error has been detected. error has been detected.
module/kernel parameter: panic_on_pci_parity=[0|1] module/kernel parameter: edac_panic_on_pci_pe=[0|1]
Enable: Enable:
echo "1" >/sys/devices/system/edac/pci/panic_on_pci_parity echo "1" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe
Disable: Disable:
echo "0" >/sys/devices/system/edac/pci/panic_on_pci_parity echo "0" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe
Parity Count:
'pci_parity_count'
This attribute file will display the number of parity errors that
have been detected.
......
...@@ -123,16 +123,6 @@ static const char *edac_caps[] = { ...@@ -123,16 +123,6 @@ static const char *edac_caps[] = {
/*
* /sys/devices/system/edac/mc;
* data structures and methods
*/
static ssize_t memctrl_int_show(void *ptr, char *buffer)
{
int *value = (int *)ptr;
return sprintf(buffer, "%u\n", *value);
}
static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count) static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
{ {
int *value = (int *)ptr; int *value = (int *)ptr;
...@@ -143,23 +133,6 @@ static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count) ...@@ -143,23 +133,6 @@ static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
return count; return count;
} }
/*
* mc poll_msec time value
*/
static ssize_t poll_msec_int_store(void *ptr, const char *buffer, size_t count)
{
int *value = (int *)ptr;
if (isdigit(*buffer)) {
*value = simple_strtoul(buffer, NULL, 0);
/* notify edac_mc engine to reset the poll period */
edac_mc_reset_delay_period(*value);
}
return count;
}
/* EDAC sysfs CSROW data structures and methods /* EDAC sysfs CSROW data structures and methods
*/ */
...@@ -669,98 +642,10 @@ static struct kobj_type ktype_mci = { ...@@ -669,98 +642,10 @@ static struct kobj_type ktype_mci = {
.default_attrs = (struct attribute **)mci_attr, .default_attrs = (struct attribute **)mci_attr,
}; };
/* show/store, tables, etc for the MC kset */
struct memctrl_dev_attribute {
struct attribute attr;
void *value;
ssize_t(*show) (void *, char *);
ssize_t(*store) (void *, const char *, size_t);
};
/* Set of show/store abstract level functions for memory control object */
static ssize_t memctrl_dev_show(struct kobject *kobj,
struct attribute *attr, char *buffer)
{
struct memctrl_dev_attribute *memctrl_dev;
memctrl_dev = (struct memctrl_dev_attribute *)attr;
if (memctrl_dev->show)
return memctrl_dev->show(memctrl_dev->value, buffer);
return -EIO;
}
static ssize_t memctrl_dev_store(struct kobject *kobj, struct attribute *attr,
const char *buffer, size_t count)
{
struct memctrl_dev_attribute *memctrl_dev;
memctrl_dev = (struct memctrl_dev_attribute *)attr;
if (memctrl_dev->store)
return memctrl_dev->store(memctrl_dev->value, buffer, count);
return -EIO;
}
static struct sysfs_ops memctrlfs_ops = {
.show = memctrl_dev_show,
.store = memctrl_dev_store
};
#define MEMCTRL_ATTR(_name, _mode, _show, _store) \
static struct memctrl_dev_attribute attr_##_name = { \
.attr = {.name = __stringify(_name), .mode = _mode }, \
.value = &_name, \
.show = _show, \
.store = _store, \
};
#define MEMCTRL_STRING_ATTR(_name, _data, _mode, _show, _store) \
static struct memctrl_dev_attribute attr_##_name = { \
.attr = {.name = __stringify(_name), .mode = _mode }, \
.value = _data, \
.show = _show, \
.store = _store, \
};
/* csrow<id> control files */
MEMCTRL_ATTR(edac_mc_panic_on_ue,
S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
MEMCTRL_ATTR(edac_mc_log_ue,
S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
MEMCTRL_ATTR(edac_mc_log_ce,
S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
MEMCTRL_ATTR(edac_mc_poll_msec,
S_IRUGO | S_IWUSR, memctrl_int_show, poll_msec_int_store);
/* Base Attributes of the memory ECC object */
static struct memctrl_dev_attribute *memctrl_attr[] = {
&attr_edac_mc_panic_on_ue,
&attr_edac_mc_log_ue,
&attr_edac_mc_log_ce,
&attr_edac_mc_poll_msec,
NULL,
};
/* the ktype for the mc_kset internal kobj */
static struct kobj_type ktype_mc_set_attribs = {
.sysfs_ops = &memctrlfs_ops,
.default_attrs = (struct attribute **)memctrl_attr,
};
/* EDAC memory controller sysfs kset: /* EDAC memory controller sysfs kset:
* /sys/devices/system/edac/mc * /sys/devices/system/edac/mc
*/ */
static struct kset mc_kset = { static struct kset mc_kset;
.kobj = {.ktype = &ktype_mc_set_attribs },
};
/* /*
* edac_mc_register_sysfs_main_kobj * edac_mc_register_sysfs_main_kobj
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment