ARM: tegra: add USB DT entries for Tegra114, Dalmore

Device tree entries for the three EHCI controllers on Tegra114.
Enables the the third controller (USB host) on Dalmore.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -1051,6 +1051,15 @@ sdhci@78000600 {
 		non-removable;
 	};
 
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usb3_vbus_reg>;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arm/boot/dts/tegra114.dtsi

@@ -430,6 +430,68 @@ sdhci@78000600 {
 		status = "disable";
 	};
 
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>;
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;