Commit 32aeba1f authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

tg3: Remove unused PHY_BRCM flags

The tg3 driver tried to communicate towards the PHY driver whether it
wanted RGMII in-band signaling enabled or disabled however there is
nothing that looks at those flags in drivers/net/phy/broadcom.c so this
does do not anything.
Suggested-by: default avatarVladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 2928de97
...@@ -1580,12 +1580,6 @@ static int tg3_mdio_init(struct tg3 *tp) ...@@ -1580,12 +1580,6 @@ static int tg3_mdio_init(struct tg3 *tp)
PHY_BRCM_RX_REFCLK_UNUSED | PHY_BRCM_RX_REFCLK_UNUSED |
PHY_BRCM_DIS_TXCRXC_NOENRGY | PHY_BRCM_DIS_TXCRXC_NOENRGY |
PHY_BRCM_AUTO_PWRDWN_ENABLE; PHY_BRCM_AUTO_PWRDWN_ENABLE;
if (tg3_flag(tp, RGMII_INBAND_DISABLE))
phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
if (tg3_flag(tp, RGMII_EXT_IBND_RX_EN))
phydev->dev_flags |= PHY_BRCM_EXT_IBND_RX_ENABLE;
if (tg3_flag(tp, RGMII_EXT_IBND_TX_EN))
phydev->dev_flags |= PHY_BRCM_EXT_IBND_TX_ENABLE;
fallthrough; fallthrough;
case PHY_ID_RTL8211C: case PHY_ID_RTL8211C:
phydev->interface = PHY_INTERFACE_MODE_RGMII; phydev->interface = PHY_INTERFACE_MODE_RGMII;
......
...@@ -63,12 +63,9 @@ ...@@ -63,12 +63,9 @@
#define PHY_BRCM_AUTO_PWRDWN_ENABLE 0x00000001 #define PHY_BRCM_AUTO_PWRDWN_ENABLE 0x00000001
#define PHY_BRCM_RX_REFCLK_UNUSED 0x00000002 #define PHY_BRCM_RX_REFCLK_UNUSED 0x00000002
#define PHY_BRCM_STD_IBND_DISABLE 0x00000004 #define PHY_BRCM_CLEAR_RGMII_MODE 0x00000004
#define PHY_BRCM_EXT_IBND_RX_ENABLE 0x00000008 #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00000008
#define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00000010 #define PHY_BRCM_EN_MASTER_MODE 0x00000010
#define PHY_BRCM_CLEAR_RGMII_MODE 0x00000020
#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00000040
#define PHY_BRCM_EN_MASTER_MODE 0x00000080
/* Broadcom BCM7xxx specific workarounds */ /* Broadcom BCM7xxx specific workarounds */
#define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff) #define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment