Commit 32d5493e authored by Alan Stern's avatar Alan Stern Committed by Greg Kroah-Hartman

usb-storage: make isd200 a separate module

This patch (as1208) converts usb-storage's isd200 subdriver into a
separate module.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 0ff71883
......@@ -46,7 +46,7 @@ config USB_STORAGE_FREECOM
Freecom has a web page at <http://www.freecom.de/>.
config USB_STORAGE_ISD200
bool "ISD-200 USB/ATA Bridge support"
tristate "ISD-200 USB/ATA Bridge support"
depends on USB_STORAGE
---help---
Say Y here if you want to use USB Mass Store devices based
......@@ -61,6 +61,8 @@ config USB_STORAGE_ISD200
- CyQ've CQ8060A CDRW drive
- Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
If this driver is compiled as a module, it will be named ums-isd200.
config USB_STORAGE_USBAT
bool "USBAT/USBAT02-based storage support"
depends on USB_STORAGE
......
......@@ -13,7 +13,6 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT) += shuttle_usbat.o
usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55) += sddr55.o
usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
......@@ -30,6 +29,8 @@ else
obj-$(CONFIG_USB) += libusual.o usual-tables.o
endif
obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o
obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o
ums-isd200-objs := isd200.o
ums-sddr09-objs := sddr09.o
......@@ -44,6 +44,7 @@
#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/hdreg.h>
#include <linux/scatterlist.h>
......@@ -57,7 +58,50 @@
#include "protocol.h"
#include "debug.h"
#include "scsiglue.h"
#include "isd200.h"
static int isd200_Initialization(struct us_data *us);
/*
* The table of devices
*/
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
vendorName, productName, useProtocol, useTransport, \
initFunction, flags) \
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
struct usb_device_id isd200_usb_ids[] = {
# include "unusual_isd200.h"
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, isd200_usb_ids);
#undef UNUSUAL_DEV
#undef USUAL_DEV
/*
* The flags table
*/
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
vendor_name, product_name, use_protocol, use_transport, \
init_function, Flags) \
{ \
.vendorName = vendor_name, \
.productName = product_name, \
.useProtocol = use_protocol, \
.useTransport = use_transport, \
.initFunction = init_function, \
}
static struct us_unusual_dev isd200_unusual_dev_list[] = {
# include "unusual_isd200.h"
{ } /* Terminating entry */
};
#undef UNUSUAL_DEV
#undef USUAL_DEV
/* Timeout defines (in Seconds) */
......@@ -1518,7 +1562,7 @@ static int isd200_init_info(struct us_data *us)
* Initialization for the ISD200
*/
int isd200_Initialization(struct us_data *us)
static int isd200_Initialization(struct us_data *us)
{
US_DEBUGP("ISD200 Initialization...\n");
......@@ -1549,7 +1593,7 @@ int isd200_Initialization(struct us_data *us)
*
*/
void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
{
int sendToTransport = 1, orig_bufflen;
union ata_cdb ataCdb;
......@@ -1570,3 +1614,47 @@ void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
isd200_srb_set_bufflen(srb, orig_bufflen);
}
static int isd200_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct us_data *us;
int result;
result = usb_stor_probe1(&us, intf, id,
(id - isd200_usb_ids) + isd200_unusual_dev_list);
if (result)
return result;
us->protocol_name = "ISD200 ATA/ATAPI";
us->proto_handler = isd200_ata_command;
result = usb_stor_probe2(us);
return result;
}
static struct usb_driver isd200_driver = {
.name = "ums-isd200",
.probe = isd200_probe,
.disconnect = usb_stor_disconnect,
.suspend = usb_stor_suspend,
.resume = usb_stor_resume,
.reset_resume = usb_stor_reset_resume,
.pre_reset = usb_stor_pre_reset,
.post_reset = usb_stor_post_reset,
.id_table = isd200_usb_ids,
.soft_unbind = 1,
};
static int __init isd200_init(void)
{
return usb_register(&isd200_driver);
}
static void __exit isd200_exit(void)
{
usb_deregister(&isd200_driver);
}
module_init(isd200_init);
module_exit(isd200_exit);
......@@ -632,14 +632,6 @@ UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110,
"Sony",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0 ),
#endif
/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000,
"Sony",
......@@ -785,32 +777,6 @@ UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110,
"In-System",
"USB/IDE Bridge (ATA/ATAPI)",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0 ),
UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110,
"In-System",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0 ),
UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110,
"In-System",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0 ),
UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110,
"In-System",
"USB Storage Adapter V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0 ),
#endif
/* Submitted by Sven Anderson <sven-linux@anderson.de>
* There are at least four ProductIDs used for iPods, so I added 0x1202 and
* 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
......@@ -1375,14 +1341,6 @@ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
"USB Cable 205",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0 ),
#endif
#ifdef CONFIG_USB_STORAGE_DATAFAB
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
"Acomdata",
......
/* Header File for In-System Design, Inc. ISD200 ASIC
*
* First release
*
* Current development and maintenance by:
* (c) 2000 In-System Design, Inc. (support@in-system.com)
*
* See isd200.c for more information.
/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -22,10 +15,43 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _USB_ISD200_H
#define _USB_ISD200_H
#if defined(CONFIG_USB_STORAGE_ISD200) || \
defined(CONFIG_USB_STORAGE_ISD200_MODULE)
UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110,
"Sony",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110,
"In-System",
"USB/IDE Bridge (ATA/ATAPI)",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110,
"In-System",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110,
"In-System",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110,
"In-System",
"USB Storage Adapter V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0),
extern void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us);
extern int isd200_Initialization(struct us_data *us);
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
"USB Cable 205",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0),
#endif
#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */
......@@ -75,9 +75,6 @@
#ifdef CONFIG_USB_STORAGE_FREECOM
#include "freecom.h"
#endif
#ifdef CONFIG_USB_STORAGE_ISD200
#include "isd200.h"
#endif
#ifdef CONFIG_USB_STORAGE_DATAFAB
#include "datafab.h"
#endif
......@@ -721,13 +718,6 @@ static void get_protocol(struct us_data *us)
us->proto_handler = usb_stor_ufi_command;
break;
#ifdef CONFIG_USB_STORAGE_ISD200
case US_SC_ISD200:
us->protocol_name = "ISD200 ATA/ATAPI";
us->proto_handler = isd200_ata_command;
break;
#endif
#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
case US_SC_CYP_ATACB:
us->protocol_name = "Transparent SCSI with Cypress ATACB";
......
......@@ -77,6 +77,7 @@ struct ignore_entry {
}
static struct ignore_entry ignore_ids[] = {
# include "unusual_isd200.h"
# include "unusual_sddr09.h"
{ } /* Terminating entry */
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment