Merge branch 'net-sfp-add-support-for-gpon-rtl8672-rtl9601c-and-ubiquiti-u-fiber'

Pali Rohár says:

====================
net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber

This is fourth version of patches which add workarounds for
RTL8672/RTL9601C EEPROMs and Ubiquiti U-Fiber Instant SFP.
====================

Link: https://lore.kernel.org/r/20210125150228.8523-1-pali@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/phy/sfp-bus.c

@@ -44,6 +44,17 @@ static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
 	phylink_set(modes, 2500baseX_Full);
 }
 
+static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id,
+				      unsigned long *modes)
+{
+	/* Ubiquiti U-Fiber Instant module claims that support all transceiver
+	 * types including 10G Ethernet which is not truth. So clear all claimed
+	 * modes and set only one mode which module supports: 1000baseX_Full.
+	 */
+	phylink_zero(modes);
+	phylink_set(modes, 1000baseX_Full);
+}
+
 static const struct sfp_quirk sfp_quirks[] = {
 	{
 		// Alcatel Lucent G-010S-P can operate at 2500base-X, but
@@ -63,6 +74,10 @@ static const struct sfp_quirk sfp_quirks[] = {
 		.vendor = "HUAWEI",
 		.part = "MA5671A",
 		.modes = sfp_quirk_2500basex,
+	}, {
+		.vendor = "UBNT",
+		.part = "UF-INSTANT",
+		.modes = sfp_quirk_ubnt_uf_instant,
 	},
 };
 

drivers/net/phy/sfp.c

@@ -277,8 +277,21 @@ static const struct sff_data sff_data = {
 
 static bool sfp_module_supported(const struct sfp_eeprom_id *id)
 {
-	return id->base.phys_id == SFF8024_ID_SFP &&
-	       id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
+	if (id->base.phys_id == SFF8024_ID_SFP &&
+	    id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP)
+		return true;
+
+	/* SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored
+	 * phys id SFF instead of SFP. Therefore mark this module explicitly
+	 * as supported based on vendor name and pn match.
+	 */
+	if (id->base.phys_id == SFF8024_ID_SFF_8472 &&
+	    id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP &&
+	    !memcmp(id->base.vendor_name, "UBNT            ", 16) &&
+	    !memcmp(id->base.vendor_pn, "UF-INSTANT      ", 16))
+		return true;
+
+	return false;
 }
 
 static const struct sff_data sfp_data = {
@@ -340,19 +353,11 @@ static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
 			size_t len)
 {
 	struct i2c_msg msgs[2];
-	size_t block_size;
+	u8 bus_addr = a2 ? 0x51 : 0x50;
+	size_t block_size = sfp->i2c_block_size;
 	size_t this_len;
-	u8 bus_addr;
 	int ret;
 
-	if (a2) {
-		block_size = 16;
-		bus_addr = 0x51;
-	} else {
-		block_size = sfp->i2c_block_size;
-		bus_addr = 0x50;
-	}
-
 	msgs[0].addr = bus_addr;
 	msgs[0].flags = 0;
 	msgs[0].len = 1;
@@ -1286,6 +1291,20 @@ static void sfp_hwmon_probe(struct work_struct *work)
 	struct sfp *sfp = container_of(work, struct sfp, hwmon_probe.work);
 	int err, i;
 
+	/* hwmon interface needs to access 16bit registers in atomic way to
+	 * guarantee coherency of the diagnostic monitoring data. If it is not
+	 * possible to guarantee coherency because EEPROM is broken in such way
+	 * that does not support atomic 16bit read operation then we have to
+	 * skip registration of hwmon device.
+	 */
+	if (sfp->i2c_block_size < 2) {
+		dev_info(sfp->dev,
+			 "skipping hwmon device registration due to broken EEPROM\n");
+		dev_info(sfp->dev,
+			 "diagnostic EEPROM area cannot be read atomically to guarantee data coherency\n");
+		return;
+	}
+
 	err = sfp_read(sfp, true, 0, &sfp->diag, sizeof(sfp->diag));
 	if (err < 0) {
 		if (sfp->hwmon_tries--) {
@@ -1702,26 +1721,30 @@ static int sfp_sm_mod_hpower(struct sfp *sfp, bool enable)
 	return 0;
 }
 
-/* Some modules (Nokia 3FE46541AA) lock up if byte 0x51 is read as a
- * single read. Switch back to reading 16 byte blocks unless we have
- * a CarlitoxxPro module (rebranded VSOL V2801F). Even more annoyingly,
- * some VSOL V2801F have the vendor name changed to OEM.
+/* GPON modules based on Realtek RTL8672 and RTL9601C chips (e.g. V-SOL
+ * V2801F, CarlitoxxPro CPGOS03-0490, Ubiquiti U-Fiber Instant, ...) do
+ * not support multibyte reads from the EEPROM. Each multi-byte read
+ * operation returns just one byte of EEPROM followed by zeros. There is
+ * no way to identify which modules are using Realtek RTL8672 and RTL9601C
+ * chips. Moreover every OEM of V-SOL V2801F module puts its own vendor
+ * name and vendor id into EEPROM, so there is even no way to detect if
+ * module is V-SOL V2801F. Therefore check for those zeros in the read
+ * data and then based on check switch to reading EEPROM to one byte
+ * at a time.
  */
-static int sfp_quirk_i2c_block_size(const struct sfp_eeprom_base *base)
+static bool sfp_id_needs_byte_io(struct sfp *sfp, void *buf, size_t len)
 {
-	if (!memcmp(base->vendor_name, "VSOL            ", 16))
-		return 1;
-	if (!memcmp(base->vendor_name, "OEM             ", 16) &&
-	    !memcmp(base->vendor_pn,   "V2801F          ", 16))
-		return 1;
+	size_t i, block_size = sfp->i2c_block_size;
 
-	/* Some modules can't cope with long reads */
-	return 16;
-}
+	/* Already using byte IO */
+	if (block_size == 1)
+		return false;
 
-static void sfp_quirks_base(struct sfp *sfp, const struct sfp_eeprom_base *base)
-{
-	sfp->i2c_block_size = sfp_quirk_i2c_block_size(base);
+	for (i = 1; i < len; i += block_size) {
+		if (memchr_inv(buf + i, '\0', min(block_size - 1, len - i)))
+			return false;
+	}
+	return true;
 }
 
 static int sfp_cotsworks_fixup_check(struct sfp *sfp, struct sfp_eeprom_id *id)
@@ -1765,11 +1788,11 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 	u8 check;
 	int ret;
 
-	/* Some modules (CarlitoxxPro CPGOS03-0490) do not support multibyte
-	 * reads from the EEPROM, so start by reading the base identifying
-	 * information one byte at a time.
+	/* Some SFP modules and also some Linux I2C drivers do not like reads
+	 * longer than 16 bytes, so read the EEPROM in chunks of 16 bytes at
+	 * a time.
 	 */
-	sfp->i2c_block_size = 1;
+	sfp->i2c_block_size = 16;
 
 	ret = sfp_read(sfp, false, 0, &id.base, sizeof(id.base));
 	if (ret < 0) {
@@ -1783,6 +1806,33 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 		return -EAGAIN;
 	}
 
+	/* Some SFP modules (e.g. Nokia 3FE46541AA) lock up if read from
+	 * address 0x51 is just one byte at a time. Also SFF-8472 requires
+	 * that EEPROM supports atomic 16bit read operation for diagnostic
+	 * fields, so do not switch to one byte reading at a time unless it
+	 * is really required and we have no other option.
+	 */
+	if (sfp_id_needs_byte_io(sfp, &id.base, sizeof(id.base))) {
+		dev_info(sfp->dev,
+			 "Detected broken RTL8672/RTL9601C emulated EEPROM\n");
+		dev_info(sfp->dev,
+			 "Switching to reading EEPROM to one byte at a time\n");
+		sfp->i2c_block_size = 1;
+
+		ret = sfp_read(sfp, false, 0, &id.base, sizeof(id.base));
+		if (ret < 0) {
+			if (report)
+				dev_err(sfp->dev, "failed to read EEPROM: %d\n",
+					ret);
+			return -EAGAIN;
+		}
+
+		if (ret != sizeof(id.base)) {
+			dev_err(sfp->dev, "EEPROM short read: %d\n", ret);
+			return -EAGAIN;
+		}
+	}
+
 	/* Cotsworks do not seem to update the checksums when they
 	 * do the final programming with the final module part number,
 	 * serial number and date code.
@@ -1817,9 +1867,6 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 		}
 	}
 
-	/* Apply any early module-specific quirks */
-	sfp_quirks_base(sfp, &id.base);
-
 	ret = sfp_read(sfp, false, SFP_CC_BASE + 1, &id.ext, sizeof(id.ext));
 	if (ret < 0) {
 		if (report)