Commit 33106702 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: dts: imx6sl-evk: Add debug LED support

GPIO3_20 is connected to a debug LED.

Add support for it.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 44659021
...@@ -8,6 +8,7 @@ ...@@ -8,6 +8,7 @@
/dts-v1/; /dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h> #include <dt-bindings/input/input.h>
#include "imx6sl.dtsi" #include "imx6sl.dtsi"
...@@ -19,6 +20,18 @@ memory { ...@@ -19,6 +20,18 @@ memory {
reg = <0x80000000 0x40000000>; reg = <0x80000000 0x40000000>;
}; };
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
user {
label = "debug";
gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
regulators { regulators {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <1>; #address-cells = <1>;
...@@ -300,6 +313,12 @@ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1 ...@@ -300,6 +313,12 @@ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1
>; >;
}; };
pinctrl_led: ledgrp {
fsl,pins = <
MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
>;
};
pinctrl_kpp: kppgrp { pinctrl_kpp: kppgrp {
fsl,pins = < fsl,pins = <
MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment