i2c: i801: Add support for Intel Alder Lake PCH-S

Add PCI ID of SMBus controller on Intel Alder Lake PCH-S
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Documentation/i2c/busses/i2c-i801.rst

@@ -44,6 +44,7 @@ Supported adapters:
   * Intel Tiger Lake (PCH)
   * Intel Jasper Lake (SOC)
   * Intel Emmitsburg (PCH)
+  * Intel Alder Lake (PCH)
 
    Datasheets: Publicly available at the Intel website
 

drivers/i2c/busses/Kconfig

@@ -147,6 +147,7 @@ config I2C_I801
 	    Tiger Lake (PCH)
 	    Jasper Lake (SOC)
 	    Emmitsburg (PCH)
+	    Alder Lake (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

drivers/i2c/busses/i2c-i801.c

@@ -71,6 +71,7 @@
  * Tiger Lake-H (PCH)		0x43a3	32	hard	yes	yes	yes
  * Jasper Lake (SOC)		0x4da3	32	hard	yes	yes	yes
  * Comet Lake-V (PCH)		0xa3a3	32	hard	yes	yes	yes
+ * Alder Lake-S (PCH)		0x7aa3	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -228,6 +229,7 @@
 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS		0x4b23
 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS		0x4da3
 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS		0x7aa3
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS		0x8ca2
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS		0x8d22
@@ -1081,6 +1083,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS) },
 	{ 0, }
 };
 
@@ -1758,6 +1761,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	case PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS:
 	case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS:
 	case PCI_DEVICE_ID_INTEL_EBG_SMBUS:
+	case PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS:
 		priv->features |= FEATURE_BLOCK_PROC;
 		priv->features |= FEATURE_I2C_BLOCK_READ;
 		priv->features |= FEATURE_IRQ;