Merge remote-tracking branch 'spi/fix/core' into spi-linus

Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt

@@ -2,11 +2,21 @@
   (CSPI/eCSPI) for i.MX
 
 Required properties:
-- compatible : Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi"
+- compatible :
+  - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1
+  - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21
+  - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27
+  - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
+  - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
+  - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
 - fsl,spi-num-chipselects : Contains the number of the chipselect
 - cs-gpios : Specifies the gpio pins to be used for chipselects.
+- clocks : Clock specifiers for both ipg and per clocks.
+- clock-names : Clock names should include both "ipg" and "per"
+See the clock consumer binding,
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
 - dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
 		Documentation/devicetree/bindings/dma/dma.txt
 - dma-names: DMA request names should include "tx" and "rx" if present.

Documentation/devicetree/bindings/spi/qcom,spi-qup.txt

@@ -33,6 +33,11 @@ Optional properties:
 		nodes.  If unspecified, a single SPI device without a chip
 		select can be used.
 
+- dmas:         Two DMA channel specifiers following the convention outlined
+                in bindings/dma/dma.txt
+- dma-names:    Names for the dma channels, if present. There must be at
+                least one channel named "tx" for transmit and named "rx" for
+                receive.
 
 SPI slave nodes must be children of the SPI master node and can contain
 properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -51,6 +56,9 @@ Example:
 		clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 		clock-names = "core", "iface";
 
+		dmas = <&blsp1_bam 13>, <&blsp1_bam 12>;
+		dma-names = "rx", "tx";
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi8_default>;
 

Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt

@@ -16,6 +16,12 @@ Optional property:
   in big endian mode, otherwise in native mode(same with CPU), for more
   detail please see: Documentation/devicetree/bindings/regmap/regmap.txt.
 
+Optional SPI slave node properties:
+- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
+  select and the start of clock signal, at the start of a transfer.
+- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
+  signal and deactivating chip select, at the end of a transfer.
+
 Example:
 
 dspi0@4002c000 {
@@ -43,6 +49,8 @@ dspi0@4002c000 {
 		reg = <0>;
 		linux,modalias = "m25p80";
 		modal = "at26df081a";
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <50>;
 	};
 };
 

Documentation/devicetree/bindings/spi/spi-img-spfi.txt

@@ -14,6 +14,7 @@ Required properties:
 - dma-names: Must include the following entries:
   - rx
   - tx
+- cs-gpios: Must specify the GPIOs used for chipselect lines.
 - #address-cells: Must be 1.
 - #size-cells: Must be 0.
 

Documentation/devicetree/bindings/spi/spi-rockchip.txt

@@ -24,6 +24,9 @@ Optional Properties:
 - dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
 		Documentation/devicetree/bindings/dma/dma.txt
 - dma-names: DMA request names should include "tx" and "rx" if present.
+- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
+		Rx data (may need to be fine tuned for high capacitance lines).
+		No delay (0) by default.
 
 
 Example:
@@ -33,6 +36,7 @@ Example:
 		reg = <0xff110000 0x1000>;
 		dmas = <&pdma1 11>, <&pdma1 12>;
 		dma-names = "tx", "rx";
+		rx-sample-delay-ns = <10>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;

Documentation/spi/spi-summary

@@ -342,12 +342,11 @@ SPI protocol drivers somewhat resemble platform device drivers:
 		.driver = {
 			.name		= "CHIP",
 			.owner		= THIS_MODULE,
+			.pm		= &CHIP_pm_ops,
 		},
 
 		.probe		= CHIP_probe,
 		.remove		= CHIP_remove,
-		.suspend	= CHIP_suspend,
-		.resume		= CHIP_resume,
 	};
 
 The driver core will automatically attempt to bind this driver to any SPI

Documentation/spi/spidev_test.c

@@ -15,6 +15,7 @@
 #include <unistd.h>
 #include <stdio.h>
 #include <stdlib.h>
+#include <string.h>
 #include <getopt.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
@@ -34,24 +35,79 @@ static uint32_t mode;
 static uint8_t bits = 8;
 static uint32_t speed = 500000;
 static uint16_t delay;
+static int verbose;
 
-static void transfer(int fd)
+uint8_t default_tx[] = {
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0x40, 0x00, 0x00, 0x00, 0x00, 0x95,
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xF0, 0x0D,
+};
+
+uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, };
+char *input_tx;
+
+static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix)
+{
+	int i = 0;
+	const unsigned char *address = src;
+	const unsigned char *line = address;
+	unsigned char c;
+
+	printf("%s | ", prefix);
+	while (length-- > 0) {
+		printf("%02X ", *address++);
+		if (!(++i % line_size) || (length == 0 && i % line_size)) {
+			if (length == 0) {
+				while (i++ % line_size)
+					printf("__ ");
+			}
+			printf(" | ");  /* right close */
+			while (line < address) {
+				c = *line++;
+				printf("%c", (c < 33 || c == 255) ? 0x2E : c);
+			}
+			printf("\n");
+			if (length > 0)
+				printf("%s | ", prefix);
+		}
+	}
+}
+
+/*
+ *  Unescape - process hexadecimal escape character
+ *      converts shell input "\x23" -> 0x23
+ */
+int unespcape(char *_dst, char *_src, size_t len)
+{
+	int ret = 0;
+	char *src = _src;
+	char *dst = _dst;
+	unsigned int ch;
+
+	while (*src) {
+		if (*src == '\\' && *(src+1) == 'x') {
+			sscanf(src + 2, "%2x", &ch);
+			src += 4;
+			*dst++ = (unsigned char)ch;
+		} else {
+			*dst++ = *src++;
+		}
+		ret++;
+	}
+	return ret;
+}
+
+static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len)
 {
 	int ret;
-	uint8_t tx[] = {
-		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-		0x40, 0x00, 0x00, 0x00, 0x00, 0x95,
-		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-		0xDE, 0xAD, 0xBE, 0xEF, 0xBA, 0xAD,
-		0xF0, 0x0D,
-	};
-	uint8_t rx[ARRAY_SIZE(tx)] = {0, };
+
 	struct spi_ioc_transfer tr = {
 		.tx_buf = (unsigned long)tx,
 		.rx_buf = (unsigned long)rx,
-		.len = ARRAY_SIZE(tx),
+		.len = len,
 		.delay_usecs = delay,
 		.speed_hz = speed,
 		.bits_per_word = bits,
@@ -76,12 +132,9 @@ static void transfer(int fd)
 	if (ret < 1)
 		pabort("can't send spi message");
 
-	for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {
-		if (!(ret % 6))
-			puts("");
-		printf("%.2X ", rx[ret]);
-	}
-	puts("");
+	if (verbose)
+		hex_dump(tx, len, 32, "TX");
+	hex_dump(rx, len, 32, "RX");
 }
 
 static void print_usage(const char *prog)
@@ -97,6 +150,8 @@ static void print_usage(const char *prog)
 	     "  -L --lsb      least significant bit first\n"
 	     "  -C --cs-high  chip select active high\n"
 	     "  -3 --3wire    SI/SO signals shared\n"
+	     "  -v --verbose  Verbose (show tx buffer)\n"
+	     "  -p            Send data (e.g. \"1234\\xde\\xad\")\n"
 	     "  -N --no-cs    no chip select\n"
 	     "  -R --ready    slave pulls low to pause\n"
 	     "  -2 --dual     dual transfer\n"
@@ -121,12 +176,13 @@ static void parse_opts(int argc, char *argv[])
 			{ "no-cs",   0, 0, 'N' },
 			{ "ready",   0, 0, 'R' },
 			{ "dual",    0, 0, '2' },
+			{ "verbose", 0, 0, 'v' },
 			{ "quad",    0, 0, '4' },
 			{ NULL, 0, 0, 0 },
 		};
 		int c;
 
-		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24", lopts, NULL);
+		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL);
 
 		if (c == -1)
 			break;
@@ -165,9 +221,15 @@ static void parse_opts(int argc, char *argv[])
 		case 'N':
 			mode |= SPI_NO_CS;
 			break;
+		case 'v':
+			verbose = 1;
+			break;
 		case 'R':
 			mode |= SPI_READY;
 			break;
+		case 'p':
+			input_tx = optarg;
+			break;
 		case '2':
 			mode |= SPI_TX_DUAL;
 			break;
@@ -191,6 +253,9 @@ int main(int argc, char *argv[])
 {
 	int ret = 0;
 	int fd;
+	uint8_t *tx;
+	uint8_t *rx;
+	int size;
 
 	parse_opts(argc, argv);
 
@@ -235,7 +300,17 @@ int main(int argc, char *argv[])
 	printf("bits per word: %d\n", bits);
 	printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000);
 
-	transfer(fd);
+	if (input_tx) {
+		size = strlen(input_tx+1);
+		tx = malloc(size);
+		rx = malloc(size);
+		size = unespcape((char *)tx, input_tx, size);
+		transfer(fd, tx, rx, size);
+		free(rx);
+		free(tx);
+	} else {
+		transfer(fd, default_tx, default_rx, sizeof(default_tx));
+	}
 
 	close(fd);
 

drivers/dma/Kconfig

@@ -51,19 +51,6 @@ config INTEL_MIC_X100_DMA
 	  OS and tools for MIC to use with this driver are available from
 	  <http://software.intel.com/en-us/mic-developer>.
 
-config INTEL_MID_DMAC
-	tristate "Intel MID DMA support for Peripheral DMA controllers"
-	depends on PCI && X86
-	select DMA_ENGINE
-	default n
-	help
-	  Enable support for the Intel(R) MID DMA engine present
-	  in Intel MID chipsets.
-
-	  Say Y here if you have such a chipset.
-
-	  If unsure, say N.
-
 config ASYNC_TX_ENABLE_CHANNEL_SWITCH
 	bool
 

drivers/dma/Makefile

@@ -6,7 +6,6 @@ obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o
 obj-$(CONFIG_DMA_ACPI) += acpi-dma.o
 obj-$(CONFIG_DMA_OF) += of-dma.o
 
-obj-$(CONFIG_INTEL_MID_DMAC) += intel_mid_dma.o
 obj-$(CONFIG_DMATEST) += dmatest.o
 obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o

drivers/dma/intel_mid_dma_regs.h

-/*
- *  intel_mid_dma_regs.h - Intel MID DMA Drivers
- *
- *  Copyright (C) 2008-10 Intel Corp
- *  Author: Vinod Koul <vinod.koul@intel.com>
- *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *
- */
-#ifndef __INTEL_MID_DMAC_REGS_H__
-#define __INTEL_MID_DMAC_REGS_H__
-
-#include <linux/dmaengine.h>
-#include <linux/dmapool.h>
-#include <linux/pci_ids.h>
-
-#define INTEL_MID_DMA_DRIVER_VERSION "1.1.0"
-
-#define	REG_BIT0		0x00000001
-#define	REG_BIT8		0x00000100
-#define INT_MASK_WE		0x8
-#define CLEAR_DONE		0xFFFFEFFF
-#define UNMASK_INTR_REG(chan_num) \
-	((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
-#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num)
-
-#define ENABLE_CHANNEL(chan_num) \
-	((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
-
-#define DISABLE_CHANNEL(chan_num) \
-	(REG_BIT8 << chan_num)
-
-#define DESCS_PER_CHANNEL	16
-/*DMA Registers*/
-/*registers associated with channel programming*/
-#define DMA_REG_SIZE		0x400
-#define DMA_CH_SIZE		0x58
-
-/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/
-#define SAR			0x00 /* Source Address Register*/
-#define DAR			0x08 /* Destination Address Register*/
-#define LLP			0x10 /* Linked List Pointer Register*/
-#define CTL_LOW			0x18 /* Control Register*/
-#define CTL_HIGH		0x1C /* Control Register*/
-#define CFG_LOW			0x40 /* Configuration Register Low*/
-#define CFG_HIGH		0x44 /* Configuration Register high*/
-
-#define STATUS_TFR		0x2E8
-#define STATUS_BLOCK		0x2F0
-#define STATUS_ERR		0x308
-
-#define RAW_TFR			0x2C0
-#define RAW_BLOCK		0x2C8
-#define RAW_ERR			0x2E0
-
-#define MASK_TFR		0x310
-#define MASK_BLOCK		0x318
-#define MASK_SRC_TRAN		0x320
-#define MASK_DST_TRAN		0x328
-#define MASK_ERR		0x330
-
-#define CLEAR_TFR		0x338
-#define CLEAR_BLOCK		0x340
-#define CLEAR_SRC_TRAN		0x348
-#define CLEAR_DST_TRAN		0x350
-#define CLEAR_ERR		0x358
-
-#define INTR_STATUS		0x360
-#define DMA_CFG			0x398
-#define DMA_CHAN_EN		0x3A0
-
-/*DMA channel control registers*/
-union intel_mid_dma_ctl_lo {
-	struct {
-		u32	int_en:1;	/*enable or disable interrupts*/
-					/*should be 0*/
-		u32	dst_tr_width:3;	/*destination transfer width*/
-					/*usually 32 bits = 010*/
-		u32	src_tr_width:3; /*source transfer width*/
-					/*usually 32 bits = 010*/
-		u32	dinc:2;		/*destination address inc/dec*/
-					/*For mem:INC=00, Periphral NoINC=11*/
-		u32	sinc:2;		/*source address inc or dec, as above*/
-		u32	dst_msize:3;	/*destination burst transaction length*/
-					/*always = 16 ie 011*/
-		u32	src_msize:3;	/*source burst transaction length*/
-					/*always = 16 ie 011*/
-		u32	reser1:3;
-		u32	tt_fc:3;	/*transfer type and flow controller*/
-					/*M-M = 000
-					  P-M = 010
-					  M-P = 001*/
-		u32	dms:2;		/*destination master select = 0*/
-		u32	sms:2;		/*source master select = 0*/
-		u32	llp_dst_en:1;	/*enable/disable destination LLP = 0*/
-		u32	llp_src_en:1;	/*enable/disable source LLP = 0*/
-		u32	reser2:3;
-	} ctlx;
-	u32	ctl_lo;
-};
-
-union intel_mid_dma_ctl_hi {
-	struct {
-		u32	block_ts:12;	/*block transfer size*/
-		u32	done:1;		/*Done - updated by DMAC*/
-		u32	reser:19;	/*configured by DMAC*/
-	} ctlx;
-	u32	ctl_hi;
-
-};
-
-/*DMA channel configuration registers*/
-union intel_mid_dma_cfg_lo {
-	struct {
-		u32	reser1:5;
-		u32	ch_prior:3;	/*channel priority = 0*/
-		u32	ch_susp:1;	/*channel suspend = 0*/
-		u32	fifo_empty:1;	/*FIFO empty or not R bit = 0*/
-		u32	hs_sel_dst:1;	/*select HW/SW destn handshaking*/
-					/*HW = 0, SW = 1*/
-		u32	hs_sel_src:1;	/*select HW/SW src handshaking*/
-		u32	reser2:6;
-		u32	dst_hs_pol:1;	/*dest HS interface polarity*/
-		u32	src_hs_pol:1;	/*src HS interface polarity*/
-		u32	max_abrst:10;	/*max AMBA burst len = 0 (no sw limit*/
-		u32	reload_src:1;	/*auto reload src addr =1 if src is P*/
-		u32	reload_dst:1;	/*AR destn addr =1 if dstn is P*/
-	} cfgx;
-	u32	cfg_lo;
-};
-
-union intel_mid_dma_cfg_hi {
-	struct {
-		u32	fcmode:1;	/*flow control mode = 1*/
-		u32	fifo_mode:1;	/*FIFO mode select = 1*/
-		u32	protctl:3;	/*protection control = 0*/
-		u32	rsvd:2;
-		u32	src_per:4;	/*src hw HS interface*/
-		u32	dst_per:4;	/*dstn hw HS interface*/
-		u32	reser2:17;
-	} cfgx;
-	u32	cfg_hi;
-};
-
-
-/**
- * struct intel_mid_dma_chan - internal mid representation of a DMA channel
- * @chan: dma_chan strcture represetation for mid chan
- * @ch_regs: MMIO register space pointer to channel register
- * @dma_base: MMIO register space DMA engine base pointer
- * @ch_id: DMA channel id
- * @lock: channel spinlock
- * @active_list: current active descriptors
- * @queue: current queued up descriptors
- * @free_list: current free descriptors
- * @slave: dma slave structure
- * @descs_allocated: total number of descriptors allocated
- * @dma: dma device structure pointer
- * @busy: bool representing if ch is busy (active txn) or not
- * @in_use: bool representing if ch is in use or not
- * @raw_tfr: raw trf interrupt received
- * @raw_block: raw block interrupt received
- */
-struct intel_mid_dma_chan {
-	struct dma_chan		chan;
-	void __iomem		*ch_regs;
-	void __iomem		*dma_base;
-	int			ch_id;
-	spinlock_t		lock;
-	struct list_head	active_list;
-	struct list_head	queue;
-	struct list_head	free_list;
-	unsigned int		descs_allocated;
-	struct middma_device	*dma;
-	bool			busy;
-	bool			in_use;
-	u32			raw_tfr;
-	u32			raw_block;
-	struct intel_mid_dma_slave *mid_slave;
-};
-
-static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan(
-						struct dma_chan *chan)
-{
-	return container_of(chan, struct intel_mid_dma_chan, chan);
-}
-
-enum intel_mid_dma_state {
-	RUNNING = 0,
-	SUSPENDED,
-};
-/**
- * struct middma_device - internal representation of a DMA device
- * @pdev: PCI device
- * @dma_base: MMIO register space pointer of DMA
- * @dma_pool: for allocating DMA descriptors
- * @common: embedded struct dma_device
- * @tasklet: dma tasklet for processing interrupts
- * @ch: per channel data
- * @pci_id: DMA device PCI ID
- * @intr_mask: Interrupt mask to be used
- * @mask_reg: MMIO register for periphral mask
- * @chan_base: Base ch index (read from driver data)
- * @max_chan: max number of chs supported (from drv_data)
- * @block_size: Block size of DMA transfer supported (from drv_data)
- * @pimr_mask: MMIO register addr for periphral interrupt (from drv_data)
- * @state: dma PM device state
- */
-struct middma_device {
-	struct pci_dev		*pdev;
-	void __iomem		*dma_base;
-	struct pci_pool		*dma_pool;
-	struct dma_device	common;
-	struct tasklet_struct   tasklet;
-	struct intel_mid_dma_chan ch[MAX_CHAN];
-	unsigned int		pci_id;
-	unsigned int		intr_mask;
-	void __iomem		*mask_reg;
-	int			chan_base;
-	int			max_chan;
-	int			block_size;
-	unsigned int		pimr_mask;
-	enum intel_mid_dma_state state;
-};
-
-static inline struct middma_device *to_middma_device(struct dma_device *common)
-{
-	return container_of(common, struct middma_device, common);
-}
-
-struct intel_mid_dma_desc {
-	void __iomem			*block; /*ch ptr*/
-	struct list_head		desc_node;
-	struct dma_async_tx_descriptor	txd;
-	size_t				len;
-	dma_addr_t			sar;
-	dma_addr_t			dar;
-	u32				cfg_hi;
-	u32				cfg_lo;
-	u32				ctl_lo;
-	u32				ctl_hi;
-	struct pci_pool			*lli_pool;
-	struct intel_mid_dma_lli	*lli;
-	dma_addr_t			lli_phys;
-	unsigned int			lli_length;
-	unsigned int			current_lli;
-	dma_addr_t			next;
-	enum dma_transfer_direction		dirn;
-	enum dma_status			status;
-	enum dma_slave_buswidth		width; /*width of DMA txn*/
-	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
-
-};
-
-struct intel_mid_dma_lli {
-	dma_addr_t			sar;
-	dma_addr_t			dar;
-	dma_addr_t			llp;
-	u32				ctl_lo;
-	u32				ctl_hi;
-} __attribute__ ((packed));
-
-static inline int test_ch_en(void __iomem *dma, u32 ch_no)
-{
-	u32 en_reg = ioread32(dma + DMA_CHAN_EN);
-	return (en_reg >> ch_no) & 0x1;
-}
-
-static inline struct intel_mid_dma_desc *to_intel_mid_dma_desc
-		(struct dma_async_tx_descriptor *txd)
-{
-	return container_of(txd, struct intel_mid_dma_desc, txd);
-}
-
-static inline struct intel_mid_dma_slave *to_intel_mid_dma_slave
-		(struct dma_slave_config *slave)
-{
-	return container_of(slave, struct intel_mid_dma_slave, dma_slave);
-}
-
-
-int dma_resume(struct device *dev);
-
-#endif /*__INTEL_MID_DMAC_REGS_H__*/

drivers/spi/Kconfig

@@ -159,10 +159,9 @@ config SPI_BUTTERFLY
 
 config SPI_CADENCE
 	tristate "Cadence SPI controller"
-	depends on ARM
 	help
 	  This selects the Cadence SPI controller master driver
-	  used by Xilinx Zynq.
+	  used by Xilinx Zynq and ZynqMP.
 
 config SPI_CLPS711X
 	tristate "CLPS711X host SPI controller"
@@ -632,7 +631,7 @@ config SPI_DW_PCI
 
 config SPI_DW_MID_DMA
 	bool "DMA support for DW SPI controller on Intel MID platform"
-	depends on SPI_DW_PCI && INTEL_MID_DMAC
+	depends on SPI_DW_PCI && DW_DMAC_PCI
 
 config SPI_DW_MMIO
 	tristate "Memory-mapped io interface driver for DW SPI core"

drivers/spi/spi-atmel.c

@@ -180,11 +180,17 @@
 	  | SPI_BF(name, value))
 
 /* Register access macros */
+#ifdef CONFIG_AVR32
 #define spi_readl(port, reg) \
 	__raw_readl((port)->regs + SPI_##reg)
 #define spi_writel(port, reg, value) \
 	__raw_writel((value), (port)->regs + SPI_##reg)
-
+#else
+#define spi_readl(port, reg) \
+	readl_relaxed((port)->regs + SPI_##reg)
+#define spi_writel(port, reg, value) \
+	writel_relaxed((value), (port)->regs + SPI_##reg)
+#endif
 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
  * cache operations; better heuristics consider wordsize and bitrate.
  */

drivers/spi/spi-bcm53xx.c

@@ -44,7 +44,7 @@ static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
 	u32 tmp;
 
 	/* SPE bit has to be 0 before we read MSPI STATUS */
-	deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000;
+	deadline = jiffies + msecs_to_jiffies(BCM53XXSPI_SPE_TIMEOUT_MS);
 	do {
 		tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
 		if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
@@ -56,7 +56,7 @@ static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
 		goto spi_timeout;
 
 	/* Check status */
-	deadline = jiffies + timeout_ms * HZ / 1000;
+	deadline = jiffies + msecs_to_jiffies(timeout_ms);
 	do {
 		tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
 		if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {

drivers/spi/spi-bfin5xx.c

@@ -559,7 +559,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 	struct spi_transfer *previous = NULL;
 	struct bfin_spi_slave_data *chip = NULL;
 	unsigned int bits_per_word;
-	u16 cr, cr_width, dma_width, dma_config;
+	u16 cr, cr_width = 0, dma_width, dma_config;
 	u32 tranf_success = 1;
 	u8 full_duplex = 0;
 
@@ -648,7 +648,6 @@ static void bfin_spi_pump_transfers(unsigned long data)
 	} else if (bits_per_word == 8) {
 		drv_data->n_bytes = bits_per_word/8;
 		drv_data->len = transfer->len;
-		cr_width = 0;
 		drv_data->ops = &bfin_bfin_spi_transfer_ops_u8;
 	}
 	cr = bfin_read(&drv_data->regs->ctl) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE);

drivers/spi/spi-bitbang-txrx.h

@@ -49,12 +49,17 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
 {
 	/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
 
+	bool oldbit = !(word & 1);
 	/* clock starts at inactive polarity */
 	for (word <<= (32 - bits); likely(bits); bits--) {
 
 		/* setup MSB (to slave) on trailing edge */
-		if ((flags & SPI_MASTER_NO_TX) == 0)
-			setmosi(spi, word & (1 << 31));
+		if ((flags & SPI_MASTER_NO_TX) == 0) {
+			if ((word & (1 << 31)) != oldbit) {
+				setmosi(spi, word & (1 << 31));
+				oldbit = word & (1 << 31);
+			}
+		}
 		spidelay(nsecs);	/* T(setup) */
 
 		setsck(spi, !cpol);
@@ -76,13 +81,18 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
 {
 	/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
 
+	bool oldbit = !(word & (1 << 31));
 	/* clock starts at inactive polarity */
 	for (word <<= (32 - bits); likely(bits); bits--) {
 
 		/* setup MSB (to slave) on leading edge */
 		setsck(spi, !cpol);
-		if ((flags & SPI_MASTER_NO_TX) == 0)
-			setmosi(spi, word & (1 << 31));
+		if ((flags & SPI_MASTER_NO_TX) == 0) {
+			if ((word & (1 << 31)) != oldbit) {
+				setmosi(spi, word & (1 << 31));
+				oldbit = word & (1 << 31);
+			}
+		}
 		spidelay(nsecs); /* T(setup) */
 
 		setsck(spi, cpol);

drivers/spi/spi-dw-mid.c

@@ -23,29 +23,31 @@
 #include "spi-dw.h"
 
 #ifdef CONFIG_SPI_DW_MID_DMA
-#include <linux/intel_mid_dma.h>
 #include <linux/pci.h>
+#include <linux/platform_data/dma-dw.h>
 
 #define RX_BUSY		0
 #define TX_BUSY		1
 
-struct mid_dma {
-	struct intel_mid_dma_slave	dmas_tx;
-	struct intel_mid_dma_slave	dmas_rx;
-};
+static struct dw_dma_slave mid_dma_tx = { .dst_id = 1 };
+static struct dw_dma_slave mid_dma_rx = { .src_id = 0 };
 
 static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
 {
-	struct dw_spi *dws = param;
+	struct dw_dma_slave *s = param;
+
+	if (s->dma_dev != chan->device->dev)
+		return false;
 
-	return dws->dma_dev == chan->device->dev;
+	chan->private = s;
+	return true;
 }
 
 static int mid_spi_dma_init(struct dw_spi *dws)
 {
-	struct mid_dma *dw_dma = dws->dma_priv;
 	struct pci_dev *dma_dev;
-	struct intel_mid_dma_slave *rxs, *txs;
+	struct dw_dma_slave *tx = dws->dma_tx;
+	struct dw_dma_slave *rx = dws->dma_rx;
 	dma_cap_mask_t mask;
 
 	/*
@@ -56,28 +58,22 @@ static int mid_spi_dma_init(struct dw_spi *dws)
 	if (!dma_dev)
 		return -ENODEV;
 
-	dws->dma_dev = &dma_dev->dev;
-
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
 	/* 1. Init rx channel */
-	dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+	rx->dma_dev = &dma_dev->dev;
+	dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, rx);
 	if (!dws->rxchan)
 		goto err_exit;
-	rxs = &dw_dma->dmas_rx;
-	rxs->hs_mode = LNW_DMA_HW_HS;
-	rxs->cfg_mode = LNW_DMA_PER_TO_MEM;
-	dws->rxchan->private = rxs;
+	dws->master->dma_rx = dws->rxchan;
 
 	/* 2. Init tx channel */
-	dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+	tx->dma_dev = &dma_dev->dev;
+	dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, tx);
 	if (!dws->txchan)
 		goto free_rxchan;
-	txs = &dw_dma->dmas_tx;
-	txs->hs_mode = LNW_DMA_HW_HS;
-	txs->cfg_mode = LNW_DMA_MEM_TO_PER;
-	dws->txchan->private = txs;
+	dws->master->dma_tx = dws->txchan;
 
 	dws->dma_inited = 1;
 	return 0;
@@ -100,6 +96,42 @@ static void mid_spi_dma_exit(struct dw_spi *dws)
 	dma_release_channel(dws->rxchan);
 }
 
+static irqreturn_t dma_transfer(struct dw_spi *dws)
+{
+	u16 irq_status = dw_readl(dws, DW_SPI_ISR);
+
+	if (!irq_status)
+		return IRQ_NONE;
+
+	dw_readl(dws, DW_SPI_ICR);
+	spi_reset_chip(dws);
+
+	dev_err(&dws->master->dev, "%s: FIFO overrun/underrun\n", __func__);
+	dws->master->cur_msg->status = -EIO;
+	spi_finalize_current_transfer(dws->master);
+	return IRQ_HANDLED;
+}
+
+static bool mid_spi_can_dma(struct spi_master *master, struct spi_device *spi,
+		struct spi_transfer *xfer)
+{
+	struct dw_spi *dws = spi_master_get_devdata(master);
+
+	if (!dws->dma_inited)
+		return false;
+
+	return xfer->len > dws->fifo_len;
+}
+
+static enum dma_slave_buswidth convert_dma_width(u32 dma_width) {
+	if (dma_width == 1)
+		return DMA_SLAVE_BUSWIDTH_1_BYTE;
+	else if (dma_width == 2)
+		return DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+	return DMA_SLAVE_BUSWIDTH_UNDEFINED;
+}
+
 /*
  * dws->dma_chan_busy is set before the dma transfer starts, callback for tx
  * channel will clear a corresponding bit.
@@ -111,33 +143,30 @@ static void dw_spi_dma_tx_done(void *arg)
 	clear_bit(TX_BUSY, &dws->dma_chan_busy);
 	if (test_bit(RX_BUSY, &dws->dma_chan_busy))
 		return;
-	dw_spi_xfer_done(dws);
+	spi_finalize_current_transfer(dws->master);
 }
 
-static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws)
+static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
+		struct spi_transfer *xfer)
 {
 	struct dma_slave_config txconf;
 	struct dma_async_tx_descriptor *txdesc;
 
-	if (!dws->tx_dma)
+	if (!xfer->tx_buf)
 		return NULL;
 
 	txconf.direction = DMA_MEM_TO_DEV;
 	txconf.dst_addr = dws->dma_addr;
-	txconf.dst_maxburst = LNW_DMA_MSIZE_16;
+	txconf.dst_maxburst = 16;
 	txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	txconf.dst_addr_width = dws->dma_width;
+	txconf.dst_addr_width = convert_dma_width(dws->dma_width);
 	txconf.device_fc = false;
 
 	dmaengine_slave_config(dws->txchan, &txconf);
 
-	memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl));
-	dws->tx_sgl.dma_address = dws->tx_dma;
-	dws->tx_sgl.length = dws->len;
-
 	txdesc = dmaengine_prep_slave_sg(dws->txchan,
-				&dws->tx_sgl,
-				1,
+				xfer->tx_sg.sgl,
+				xfer->tx_sg.nents,
 				DMA_MEM_TO_DEV,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!txdesc)
@@ -160,33 +189,30 @@ static void dw_spi_dma_rx_done(void *arg)
 	clear_bit(RX_BUSY, &dws->dma_chan_busy);
 	if (test_bit(TX_BUSY, &dws->dma_chan_busy))
 		return;
-	dw_spi_xfer_done(dws);
+	spi_finalize_current_transfer(dws->master);
 }
 
-static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
+static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
+		struct spi_transfer *xfer)
 {
 	struct dma_slave_config rxconf;
 	struct dma_async_tx_descriptor *rxdesc;
 
-	if (!dws->rx_dma)
+	if (!xfer->rx_buf)
 		return NULL;
 
 	rxconf.direction = DMA_DEV_TO_MEM;
 	rxconf.src_addr = dws->dma_addr;
-	rxconf.src_maxburst = LNW_DMA_MSIZE_16;
+	rxconf.src_maxburst = 16;
 	rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	rxconf.src_addr_width = dws->dma_width;
+	rxconf.src_addr_width = convert_dma_width(dws->dma_width);
 	rxconf.device_fc = false;
 
 	dmaengine_slave_config(dws->rxchan, &rxconf);
 
-	memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl));
-	dws->rx_sgl.dma_address = dws->rx_dma;
-	dws->rx_sgl.length = dws->len;
-
 	rxdesc = dmaengine_prep_slave_sg(dws->rxchan,
-				&dws->rx_sgl,
-				1,
+				xfer->rx_sg.sgl,
+				xfer->rx_sg.nents,
 				DMA_DEV_TO_MEM,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!rxdesc)
@@ -198,37 +224,36 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
 	return rxdesc;
 }
 
-static void dw_spi_dma_setup(struct dw_spi *dws)
+static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
 	u16 dma_ctrl = 0;
 
-	spi_enable_chip(dws, 0);
+	dw_writel(dws, DW_SPI_DMARDLR, 0xf);
+	dw_writel(dws, DW_SPI_DMATDLR, 0x10);
 
-	dw_writew(dws, DW_SPI_DMARDLR, 0xf);
-	dw_writew(dws, DW_SPI_DMATDLR, 0x10);
-
-	if (dws->tx_dma)
+	if (xfer->tx_buf)
 		dma_ctrl |= SPI_DMA_TDMAE;
-	if (dws->rx_dma)
+	if (xfer->rx_buf)
 		dma_ctrl |= SPI_DMA_RDMAE;
-	dw_writew(dws, DW_SPI_DMACR, dma_ctrl);
+	dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
+
+	/* Set the interrupt mask */
+	spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI);
 
-	spi_enable_chip(dws, 1);
+	dws->transfer_handler = dma_transfer;
+
+	return 0;
 }
 
-static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
+static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
 {
 	struct dma_async_tx_descriptor *txdesc, *rxdesc;
 
-	/* 1. setup DMA related registers */
-	if (cs_change)
-		dw_spi_dma_setup(dws);
+	/* Prepare the TX dma transfer */
+	txdesc = dw_spi_dma_prepare_tx(dws, xfer);
 
-	/* 2. Prepare the TX dma transfer */
-	txdesc = dw_spi_dma_prepare_tx(dws);
-
-	/* 3. Prepare the RX dma transfer */
-	rxdesc = dw_spi_dma_prepare_rx(dws);
+	/* Prepare the RX dma transfer */
+	rxdesc = dw_spi_dma_prepare_rx(dws, xfer);
 
 	/* rx must be started before tx due to spi instinct */
 	if (rxdesc) {
@@ -246,10 +271,25 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
 	return 0;
 }
 
+static void mid_spi_dma_stop(struct dw_spi *dws)
+{
+	if (test_bit(TX_BUSY, &dws->dma_chan_busy)) {
+		dmaengine_terminate_all(dws->txchan);
+		clear_bit(TX_BUSY, &dws->dma_chan_busy);
+	}
+	if (test_bit(RX_BUSY, &dws->dma_chan_busy)) {
+		dmaengine_terminate_all(dws->rxchan);
+		clear_bit(RX_BUSY, &dws->dma_chan_busy);
+	}
+}
+
 static struct dw_spi_dma_ops mid_dma_ops = {
 	.dma_init	= mid_spi_dma_init,
 	.dma_exit	= mid_spi_dma_exit,
+	.dma_setup	= mid_spi_dma_setup,
+	.can_dma	= mid_spi_can_dma,
 	.dma_transfer	= mid_spi_dma_transfer,
+	.dma_stop	= mid_spi_dma_stop,
 };
 #endif
 
@@ -282,9 +322,8 @@ int dw_spi_mid_init(struct dw_spi *dws)
 	iounmap(clk_reg);
 
 #ifdef CONFIG_SPI_DW_MID_DMA
-	dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL);
-	if (!dws->dma_priv)
-		return -ENOMEM;
+	dws->dma_tx = &mid_dma_tx;
+	dws->dma_rx = &mid_dma_rx;
 	dws->dma_ops = &mid_dma_ops;
 #endif
 	return 0;

drivers/spi/spi-dw.h

@@ -91,12 +91,15 @@ struct dw_spi;
 struct dw_spi_dma_ops {
 	int (*dma_init)(struct dw_spi *dws);
 	void (*dma_exit)(struct dw_spi *dws);
-	int (*dma_transfer)(struct dw_spi *dws, int cs_change);
+	int (*dma_setup)(struct dw_spi *dws, struct spi_transfer *xfer);
+	bool (*can_dma)(struct spi_master *master, struct spi_device *spi,
+			struct spi_transfer *xfer);
+	int (*dma_transfer)(struct dw_spi *dws, struct spi_transfer *xfer);
+	void (*dma_stop)(struct dw_spi *dws);
 };
 
 struct dw_spi {
 	struct spi_master	*master;
-	struct spi_device	*cur_dev;
 	enum dw_ssi_type	type;
 	char			name[16];
 
@@ -109,41 +112,26 @@ struct dw_spi {
 	u16			bus_num;
 	u16			num_cs;		/* supported slave numbers */
 
-	/* Message Transfer pump */
-	struct tasklet_struct	pump_transfers;
-
 	/* Current message transfer state info */
-	struct spi_message	*cur_msg;
-	struct spi_transfer	*cur_transfer;
-	struct chip_data	*cur_chip;
-	struct chip_data	*prev_chip;
 	size_t			len;
 	void			*tx;
 	void			*tx_end;
 	void			*rx;
 	void			*rx_end;
 	int			dma_mapped;
-	dma_addr_t		rx_dma;
-	dma_addr_t		tx_dma;
-	size_t			rx_map_len;
-	size_t			tx_map_len;
 	u8			n_bytes;	/* current is a 1/2 bytes op */
-	u8			max_bits_per_word;	/* maxim is 16b */
 	u32			dma_width;
 	irqreturn_t		(*transfer_handler)(struct dw_spi *dws);
-	void			(*cs_control)(u32 command);
 
-	/* Dma info */
+	/* DMA info */
 	int			dma_inited;
 	struct dma_chan		*txchan;
-	struct scatterlist	tx_sgl;
 	struct dma_chan		*rxchan;
-	struct scatterlist	rx_sgl;
 	unsigned long		dma_chan_busy;
-	struct device		*dma_dev;
 	dma_addr_t		dma_addr; /* phy address of the Data register */
 	struct dw_spi_dma_ops	*dma_ops;
-	void			*dma_priv; /* platform relate info */
+	void			*dma_tx;
+	void			*dma_rx;
 
 	/* Bus interface info */
 	void			*priv;
@@ -162,16 +150,6 @@ static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
 	__raw_writel(val, dws->regs + offset);
 }
 
-static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
-{
-	return __raw_readw(dws->regs + offset);
-}
-
-static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
-{
-	__raw_writew(val, dws->regs + offset);
-}
-
 static inline void spi_enable_chip(struct dw_spi *dws, int enable)
 {
 	dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
@@ -182,22 +160,6 @@ static inline void spi_set_clk(struct dw_spi *dws, u16 div)
 	dw_writel(dws, DW_SPI_BAUDR, div);
 }
 
-static inline void spi_chip_sel(struct dw_spi *dws, struct spi_device *spi,
-		int active)
-{
-	u16 cs = spi->chip_select;
-	int gpio_val = active ? (spi->mode & SPI_CS_HIGH) :
-		!(spi->mode & SPI_CS_HIGH);
-
-	if (dws->cs_control)
-		dws->cs_control(active);
-	if (gpio_is_valid(spi->cs_gpio))
-		gpio_set_value(spi->cs_gpio, gpio_val);
-
-	if (active)
-		dw_writel(dws, DW_SPI_SER, 1 << cs);
-}
-
 /* Disable IRQ bits */
 static inline void spi_mask_intr(struct dw_spi *dws, u32 mask)
 {
@@ -216,16 +178,27 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
 	dw_writel(dws, DW_SPI_IMR, new_mask);
 }
 
+/*
+ * This does disable the SPI controller, interrupts, and re-enable the
+ * controller back. Transmit and receive FIFO buffers are cleared when the
+ * device is disabled.
+ */
+static inline void spi_reset_chip(struct dw_spi *dws)
+{
+	spi_enable_chip(dws, 0);
+	spi_mask_intr(dws, 0xff);
+	spi_enable_chip(dws, 1);
+}
+
 /*
  * Each SPI slave device to work with dw_api controller should
- * has such a structure claiming its working mode (PIO/DMA etc),
+ * has such a structure claiming its working mode (poll or PIO/DMA),
  * which can be save in the "controller_data" member of the
  * struct spi_device.
  */
 struct dw_spi_chip {
 	u8 poll_mode;	/* 1 for controller polling mode */
 	u8 type;	/* SPI/SSP/MicroWire */
-	u8 enable_dma;
 	void (*cs_control)(u32 command);
 };
 
@@ -233,7 +206,6 @@ extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws);
 extern void dw_spi_remove_host(struct dw_spi *dws);
 extern int dw_spi_suspend_host(struct dw_spi *dws);
 extern int dw_spi_resume_host(struct dw_spi *dws);
-extern void dw_spi_xfer_done(struct dw_spi *dws);
 
 /* platform related setup */
 extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */

drivers/spi/spi-fsl-dspi.c

@@ -20,6 +20,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -29,6 +30,7 @@
 #include <linux/sched.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
+#include <linux/time.h>
 
 #define DRIVER_NAME "fsl-dspi"
 
@@ -51,7 +53,7 @@
 #define SPI_CTAR_CPOL(x)	((x) << 26)
 #define SPI_CTAR_CPHA(x)	((x) << 25)
 #define SPI_CTAR_LSBFE(x)	((x) << 24)
-#define SPI_CTAR_PCSSCR(x)	(((x) & 0x00000003) << 22)
+#define SPI_CTAR_PCSSCK(x)	(((x) & 0x00000003) << 22)
 #define SPI_CTAR_PASC(x)	(((x) & 0x00000003) << 20)
 #define SPI_CTAR_PDT(x)	(((x) & 0x00000003) << 18)
 #define SPI_CTAR_PBR(x)	(((x) & 0x00000003) << 16)
@@ -59,6 +61,7 @@
 #define SPI_CTAR_ASC(x)	(((x) & 0x0000000f) << 8)
 #define SPI_CTAR_DT(x)		(((x) & 0x0000000f) << 4)
 #define SPI_CTAR_BR(x)		((x) & 0x0000000f)
+#define SPI_CTAR_SCALE_BITS	0xf
 
 #define SPI_CTAR0_SLAVE	0x0c
 
@@ -148,23 +151,66 @@ static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
 		16,	32,	64,	128,
 		256,	512,	1024,	2048,
 		4096,	8192,	16384,	32768 };
-	int temp, i = 0, j = 0;
+	int scale_needed, scale, minscale = INT_MAX;
+	int i, j;
+
+	scale_needed = clkrate / speed_hz;
+	if (clkrate % speed_hz)
+		scale_needed++;
+
+	for (i = 0; i < ARRAY_SIZE(brs); i++)
+		for (j = 0; j < ARRAY_SIZE(pbr_tbl); j++) {
+			scale = brs[i] * pbr_tbl[j];
+			if (scale >= scale_needed) {
+				if (scale < minscale) {
+					minscale = scale;
+					*br = i;
+					*pbr = j;
+				}
+				break;
+			}
+		}
 
-	temp = clkrate / 2 / speed_hz;
+	if (minscale == INT_MAX) {
+		pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n",
+			speed_hz, clkrate);
+		*pbr = ARRAY_SIZE(pbr_tbl) - 1;
+		*br =  ARRAY_SIZE(brs) - 1;
+	}
+}
 
-	for (i = 0; i < ARRAY_SIZE(pbr_tbl); i++)
-		for (j = 0; j < ARRAY_SIZE(brs); j++) {
-			if (pbr_tbl[i] * brs[j] >= temp) {
-				*pbr = i;
-				*br = j;
-				return;
+static void ns_delay_scale(char *psc, char *sc, int delay_ns,
+		unsigned long clkrate)
+{
+	int pscale_tbl[4] = {1, 3, 5, 7};
+	int scale_needed, scale, minscale = INT_MAX;
+	int i, j;
+	u32 remainder;
+
+	scale_needed = div_u64_rem((u64)delay_ns * clkrate, NSEC_PER_SEC,
+			&remainder);
+	if (remainder)
+		scale_needed++;
+
+	for (i = 0; i < ARRAY_SIZE(pscale_tbl); i++)
+		for (j = 0; j <= SPI_CTAR_SCALE_BITS; j++) {
+			scale = pscale_tbl[i] * (2 << j);
+			if (scale >= scale_needed) {
+				if (scale < minscale) {
+					minscale = scale;
+					*psc = i;
+					*sc = j;
+				}
+				break;
 			}
 		}
 
-	pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld\
-		,we use the max prescaler value.\n", speed_hz, clkrate);
-	*pbr = ARRAY_SIZE(pbr_tbl) - 1;
-	*br =  ARRAY_SIZE(brs) - 1;
+	if (minscale == INT_MAX) {
+		pr_warn("Cannot find correct scale values for %dns delay at clkrate %ld, using max prescaler value",
+			delay_ns, clkrate);
+		*psc = ARRAY_SIZE(pscale_tbl) - 1;
+		*sc = SPI_CTAR_SCALE_BITS;
+	}
 }
 
 static int dspi_transfer_write(struct fsl_dspi *dspi)
@@ -345,7 +391,10 @@ static int dspi_setup(struct spi_device *spi)
 {
 	struct chip_data *chip;
 	struct fsl_dspi *dspi = spi_master_get_devdata(spi->master);
-	unsigned char br = 0, pbr = 0, fmsz = 0;
+	u32 cs_sck_delay = 0, sck_cs_delay = 0;
+	unsigned char br = 0, pbr = 0, pcssck = 0, cssck = 0;
+	unsigned char pasc = 0, asc = 0, fmsz = 0;
+	unsigned long clkrate;
 
 	if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
 		fmsz = spi->bits_per_word - 1;
@@ -362,18 +411,34 @@ static int dspi_setup(struct spi_device *spi)
 			return -ENOMEM;
 	}
 
+	of_property_read_u32(spi->dev.of_node, "fsl,spi-cs-sck-delay",
+			&cs_sck_delay);
+
+	of_property_read_u32(spi->dev.of_node, "fsl,spi-sck-cs-delay",
+			&sck_cs_delay);
+
 	chip->mcr_val = SPI_MCR_MASTER | SPI_MCR_PCSIS |
 		SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF;
 
 	chip->void_write_data = 0;
 
-	hz_to_spi_baud(&pbr, &br,
-			spi->max_speed_hz, clk_get_rate(dspi->clk));
+	clkrate = clk_get_rate(dspi->clk);
+	hz_to_spi_baud(&pbr, &br, spi->max_speed_hz, clkrate);
+
+	/* Set PCS to SCK delay scale values */
+	ns_delay_scale(&pcssck, &cssck, cs_sck_delay, clkrate);
+
+	/* Set After SCK delay scale values */
+	ns_delay_scale(&pasc, &asc, sck_cs_delay, clkrate);
 
 	chip->ctar_val =  SPI_CTAR_FMSZ(fmsz)
 		| SPI_CTAR_CPOL(spi->mode & SPI_CPOL ? 1 : 0)
 		| SPI_CTAR_CPHA(spi->mode & SPI_CPHA ? 1 : 0)
 		| SPI_CTAR_LSBFE(spi->mode & SPI_LSB_FIRST ? 1 : 0)
+		| SPI_CTAR_PCSSCK(pcssck)
+		| SPI_CTAR_CSSCK(cssck)
+		| SPI_CTAR_PASC(pasc)
+		| SPI_CTAR_ASC(asc)
 		| SPI_CTAR_PBR(pbr)
 		| SPI_CTAR_BR(br);
 

drivers/spi/spi-img-spfi.c

@@ -12,6 +12,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/dmaengine.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -122,36 +123,31 @@ static inline void spfi_start(struct img_spfi *spfi)
 	spfi_writel(spfi, val, SPFI_CONTROL);
 }
 
-static inline void spfi_stop(struct img_spfi *spfi)
-{
-	u32 val;
-
-	val = spfi_readl(spfi, SPFI_CONTROL);
-	val &= ~SPFI_CONTROL_SPFI_EN;
-	spfi_writel(spfi, val, SPFI_CONTROL);
-}
-
 static inline void spfi_reset(struct img_spfi *spfi)
 {
 	spfi_writel(spfi, SPFI_CONTROL_SOFT_RESET, SPFI_CONTROL);
-	udelay(1);
 	spfi_writel(spfi, 0, SPFI_CONTROL);
 }
 
-static void spfi_flush_tx_fifo(struct img_spfi *spfi)
+static int spfi_wait_all_done(struct img_spfi *spfi)
 {
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+	unsigned long timeout = jiffies + msecs_to_jiffies(50);
 
-	spfi_writel(spfi, SPFI_INTERRUPT_SDE, SPFI_INTERRUPT_CLEAR);
 	while (time_before(jiffies, timeout)) {
-		if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) &
-		    SPFI_INTERRUPT_SDE)
-			return;
+		u32 status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
+
+		if (status & SPFI_INTERRUPT_ALLDONETRIG) {
+			spfi_writel(spfi, SPFI_INTERRUPT_ALLDONETRIG,
+				    SPFI_INTERRUPT_CLEAR);
+			return 0;
+		}
 		cpu_relax();
 	}
 
-	dev_err(spfi->dev, "Timed out waiting for FIFO to drain\n");
+	dev_err(spfi->dev, "Timed out waiting for transaction to complete\n");
 	spfi_reset(spfi);
+
+	return -ETIMEDOUT;
 }
 
 static unsigned int spfi_pio_write32(struct img_spfi *spfi, const u32 *buf,
@@ -237,6 +233,7 @@ static int img_spfi_start_pio(struct spi_master *master,
 	const void *tx_buf = xfer->tx_buf;
 	void *rx_buf = xfer->rx_buf;
 	unsigned long timeout;
+	int ret;
 
 	if (tx_buf)
 		tx_bytes = xfer->len;
@@ -269,16 +266,15 @@ static int img_spfi_start_pio(struct spi_master *master,
 		cpu_relax();
 	}
 
+	ret = spfi_wait_all_done(spfi);
+	if (ret < 0)
+		return ret;
+
 	if (rx_bytes > 0 || tx_bytes > 0) {
 		dev_err(spfi->dev, "PIO transfer timed out\n");
-		spfi_reset(spfi);
 		return -ETIMEDOUT;
 	}
 
-	if (tx_buf)
-		spfi_flush_tx_fifo(spfi);
-	spfi_stop(spfi);
-
 	return 0;
 }
 
@@ -287,14 +283,12 @@ static void img_spfi_dma_rx_cb(void *data)
 	struct img_spfi *spfi = data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&spfi->lock, flags);
+	spfi_wait_all_done(spfi);
 
+	spin_lock_irqsave(&spfi->lock, flags);
 	spfi->rx_dma_busy = false;
-	if (!spfi->tx_dma_busy) {
-		spfi_stop(spfi);
+	if (!spfi->tx_dma_busy)
 		spi_finalize_current_transfer(spfi->master);
-	}
-
 	spin_unlock_irqrestore(&spfi->lock, flags);
 }
 
@@ -303,16 +297,12 @@ static void img_spfi_dma_tx_cb(void *data)
 	struct img_spfi *spfi = data;
 	unsigned long flags;
 
-	spfi_flush_tx_fifo(spfi);
+	spfi_wait_all_done(spfi);
 
 	spin_lock_irqsave(&spfi->lock, flags);
-
 	spfi->tx_dma_busy = false;
-	if (!spfi->rx_dma_busy) {
-		spfi_stop(spfi);
+	if (!spfi->rx_dma_busy)
 		spi_finalize_current_transfer(spfi->master);
-	}
-
 	spin_unlock_irqrestore(&spfi->lock, flags);
 }
 
@@ -397,6 +387,75 @@ static int img_spfi_start_dma(struct spi_master *master,
 	return -EIO;
 }
 
+static void img_spfi_handle_err(struct spi_master *master,
+				struct spi_message *msg)
+{
+	struct img_spfi *spfi = spi_master_get_devdata(master);
+	unsigned long flags;
+
+	/*
+	 * Stop all DMA and reset the controller if the previous transaction
+	 * timed-out and never completed it's DMA.
+	 */
+	spin_lock_irqsave(&spfi->lock, flags);
+	if (spfi->tx_dma_busy || spfi->rx_dma_busy) {
+		spfi->tx_dma_busy = false;
+		spfi->rx_dma_busy = false;
+
+		dmaengine_terminate_all(spfi->tx_ch);
+		dmaengine_terminate_all(spfi->rx_ch);
+	}
+	spin_unlock_irqrestore(&spfi->lock, flags);
+}
+
+static int img_spfi_prepare(struct spi_master *master, struct spi_message *msg)
+{
+	struct img_spfi *spfi = spi_master_get_devdata(master);
+	u32 val;
+
+	val = spfi_readl(spfi, SPFI_PORT_STATE);
+	if (msg->spi->mode & SPI_CPHA)
+		val |= SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select);
+	else
+		val &= ~SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select);
+	if (msg->spi->mode & SPI_CPOL)
+		val |= SPFI_PORT_STATE_CK_POL(msg->spi->chip_select);
+	else
+		val &= ~SPFI_PORT_STATE_CK_POL(msg->spi->chip_select);
+	spfi_writel(spfi, val, SPFI_PORT_STATE);
+
+	return 0;
+}
+
+static int img_spfi_unprepare(struct spi_master *master,
+			      struct spi_message *msg)
+{
+	struct img_spfi *spfi = spi_master_get_devdata(master);
+
+	spfi_reset(spfi);
+
+	return 0;
+}
+
+static int img_spfi_setup(struct spi_device *spi)
+{
+	int ret;
+
+	ret = gpio_request_one(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ?
+			       GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
+			       dev_name(&spi->dev));
+	if (ret)
+		dev_err(&spi->dev, "can't request chipselect gpio %d\n",
+				spi->cs_gpio);
+
+	return ret;
+}
+
+static void img_spfi_cleanup(struct spi_device *spi)
+{
+	gpio_free(spi->cs_gpio);
+}
+
 static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
 			    struct spi_transfer *xfer)
 {
@@ -405,10 +464,10 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
 
 	/*
 	 * output = spfi_clk * (BITCLK / 512), where BITCLK must be a
-	 * power of 2 up to 256 (where 255 == 256 since BITCLK is 8 bits)
+	 * power of 2 up to 128
 	 */
-	div = DIV_ROUND_UP(master->max_speed_hz, xfer->speed_hz);
-	div = clamp(512 / (1 << get_count_order(div)), 1, 255);
+	div = DIV_ROUND_UP(clk_get_rate(spfi->spfi_clk), xfer->speed_hz);
+	div = clamp(512 / (1 << get_count_order(div)), 1, 128);
 
 	val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(spi->chip_select));
 	val &= ~(SPFI_DEVICE_PARAMETER_BITCLK_MASK <<
@@ -416,6 +475,9 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
 	val |= div << SPFI_DEVICE_PARAMETER_BITCLK_SHIFT;
 	spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(spi->chip_select));
 
+	spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT,
+		    SPFI_TRANSACTION);
+
 	val = spfi_readl(spfi, SPFI_CONTROL);
 	val &= ~(SPFI_CONTROL_SEND_DMA | SPFI_CONTROL_GET_DMA);
 	if (xfer->tx_buf)
@@ -429,25 +491,7 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
 	else if (xfer->tx_nbits == SPI_NBITS_QUAD &&
 		 xfer->rx_nbits == SPI_NBITS_QUAD)
 		val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT;
-	val &= ~SPFI_CONTROL_CONTINUE;
-	if (!xfer->cs_change && !list_is_last(&xfer->transfer_list,
-					      &master->cur_msg->transfers))
-		val |= SPFI_CONTROL_CONTINUE;
 	spfi_writel(spfi, val, SPFI_CONTROL);
-
-	val = spfi_readl(spfi, SPFI_PORT_STATE);
-	if (spi->mode & SPI_CPHA)
-		val |= SPFI_PORT_STATE_CK_PHASE(spi->chip_select);
-	else
-		val &= ~SPFI_PORT_STATE_CK_PHASE(spi->chip_select);
-	if (spi->mode & SPI_CPOL)
-		val |= SPFI_PORT_STATE_CK_POL(spi->chip_select);
-	else
-		val &= ~SPFI_PORT_STATE_CK_POL(spi->chip_select);
-	spfi_writel(spfi, val, SPFI_PORT_STATE);
-
-	spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT,
-		    SPFI_TRANSACTION);
 }
 
 static int img_spfi_transfer_one(struct spi_master *master,
@@ -455,8 +499,6 @@ static int img_spfi_transfer_one(struct spi_master *master,
 				 struct spi_transfer *xfer)
 {
 	struct img_spfi *spfi = spi_master_get_devdata(spi->master);
-	bool dma_reset = false;
-	unsigned long flags;
 	int ret;
 
 	if (xfer->len > SPFI_TRANSACTION_TSIZE_MASK) {
@@ -466,23 +508,6 @@ static int img_spfi_transfer_one(struct spi_master *master,
 		return -EINVAL;
 	}
 
-	/*
-	 * Stop all DMA and reset the controller if the previous transaction
-	 * timed-out and never completed it's DMA.
-	 */
-	spin_lock_irqsave(&spfi->lock, flags);
-	if (spfi->tx_dma_busy || spfi->rx_dma_busy) {
-		dev_err(spfi->dev, "SPI DMA still busy\n");
-		dma_reset = true;
-	}
-	spin_unlock_irqrestore(&spfi->lock, flags);
-
-	if (dma_reset) {
-		dmaengine_terminate_all(spfi->tx_ch);
-		dmaengine_terminate_all(spfi->rx_ch);
-		spfi_reset(spfi);
-	}
-
 	img_spfi_config(master, spi, xfer);
 	if (master->can_dma && master->can_dma(master, spi, xfer))
 		ret = img_spfi_start_dma(master, spi, xfer);
@@ -492,17 +517,6 @@ static int img_spfi_transfer_one(struct spi_master *master,
 	return ret;
 }
 
-static void img_spfi_set_cs(struct spi_device *spi, bool enable)
-{
-	struct img_spfi *spfi = spi_master_get_devdata(spi->master);
-	u32 val;
-
-	val = spfi_readl(spfi, SPFI_PORT_STATE);
-	val &= ~(SPFI_PORT_STATE_DEV_SEL_MASK << SPFI_PORT_STATE_DEV_SEL_SHIFT);
-	val |= spi->chip_select << SPFI_PORT_STATE_DEV_SEL_SHIFT;
-	spfi_writel(spfi, val, SPFI_PORT_STATE);
-}
-
 static bool img_spfi_can_dma(struct spi_master *master, struct spi_device *spi,
 			     struct spi_transfer *xfer)
 {
@@ -591,14 +605,17 @@ static int img_spfi_probe(struct platform_device *pdev)
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_DUAL | SPI_RX_DUAL;
 	if (of_property_read_bool(spfi->dev->of_node, "img,supports-quad-mode"))
 		master->mode_bits |= SPI_TX_QUAD | SPI_RX_QUAD;
-	master->num_chipselect = 5;
 	master->dev.of_node = pdev->dev.of_node;
 	master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(8);
-	master->max_speed_hz = clk_get_rate(spfi->spfi_clk);
-	master->min_speed_hz = master->max_speed_hz / 512;
+	master->max_speed_hz = clk_get_rate(spfi->spfi_clk) / 4;
+	master->min_speed_hz = clk_get_rate(spfi->spfi_clk) / 512;
 
-	master->set_cs = img_spfi_set_cs;
+	master->setup = img_spfi_setup;
+	master->cleanup = img_spfi_cleanup;
 	master->transfer_one = img_spfi_transfer_one;
+	master->prepare_message = img_spfi_prepare;
+	master->unprepare_message = img_spfi_unprepare;
+	master->handle_err = img_spfi_handle_err;
 
 	spfi->tx_ch = dma_request_slave_channel(spfi->dev, "tx");
 	spfi->rx_ch = dma_request_slave_channel(spfi->dev, "rx");

drivers/spi/spi-imx.c

@@ -370,8 +370,6 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	if (spi_imx->dma_is_inited) {
 		dma = readl(spi_imx->base + MX51_ECSPI_DMA);
 
-		spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2;
-		spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2;
 		spi_imx->rxt_wml = spi_imx_get_fifosize(spi_imx) / 2;
 		rx_wml_cfg = spi_imx->rx_wml << MX51_ECSPI_DMA_RX_WML_OFFSET;
 		tx_wml_cfg = spi_imx->tx_wml << MX51_ECSPI_DMA_TX_WML_OFFSET;
@@ -868,6 +866,8 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 	master->max_dma_len = MAX_SDMA_BD_BYTES;
 	spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
 					 SPI_MASTER_MUST_TX;
+	spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2;
+	spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2;
 	spi_imx->dma_is_inited = 1;
 
 	return 0;
@@ -903,7 +903,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 
 	if (tx) {
 		desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
-					tx->sgl, tx->nents, DMA_TO_DEVICE,
+					tx->sgl, tx->nents, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_tx)
 			goto no_dma;
@@ -915,7 +915,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 
 	if (rx) {
 		desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
-					rx->sgl, rx->nents, DMA_FROM_DEVICE,
+					rx->sgl, rx->nents, DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_rx)
 			goto no_dma;

drivers/spi/spi-mpc512x-psc.c

@@ -588,7 +588,7 @@ static int mpc512x_psc_spi_of_remove(struct platform_device *op)
 	return mpc512x_psc_spi_do_remove(&op->dev);
 }
 
-static struct of_device_id mpc512x_psc_spi_of_match[] = {
+static const struct of_device_id mpc512x_psc_spi_of_match[] = {
 	{ .compatible = "fsl,mpc5121-psc-spi", },
 	{},
 };

drivers/spi/spi-octeon.c

@@ -238,7 +238,7 @@ static int octeon_spi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id octeon_spi_match[] = {
+static const struct of_device_id octeon_spi_match[] = {
 	{ .compatible = "cavium,octeon-3010-spi", },
 	{},
 };

drivers/spi/spi-omap-100k.c

@@ -24,6 +24,7 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -294,16 +295,6 @@ static int omap1_spi100k_setup(struct spi_device *spi)
 	return ret;
 }
 
-static int omap1_spi100k_prepare_hardware(struct spi_master *master)
-{
-	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
-
-	clk_prepare_enable(spi100k->ick);
-	clk_prepare_enable(spi100k->fck);
-
-	return 0;
-}
-
 static int omap1_spi100k_transfer_one_message(struct spi_master *master,
 					      struct spi_message *m)
 {
@@ -372,16 +363,6 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master,
 	return status;
 }
 
-static int omap1_spi100k_unprepare_hardware(struct spi_master *master)
-{
-	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
-
-	clk_disable_unprepare(spi100k->ick);
-	clk_disable_unprepare(spi100k->fck);
-
-	return 0;
-}
-
 static int omap1_spi100k_probe(struct platform_device *pdev)
 {
 	struct spi_master       *master;
@@ -402,14 +383,12 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
 
 	master->setup = omap1_spi100k_setup;
 	master->transfer_one_message = omap1_spi100k_transfer_one_message;
-	master->prepare_transfer_hardware = omap1_spi100k_prepare_hardware;
-	master->unprepare_transfer_hardware = omap1_spi100k_unprepare_hardware;
-	master->cleanup = NULL;
 	master->num_chipselect = 2;
 	master->mode_bits = MODEBITS;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
 	master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16);
 	master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ;
+	master->auto_runtime_pm = true;
 
 	spi100k = spi_master_get_devdata(master);
 
@@ -434,22 +413,96 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	status = clk_prepare_enable(spi100k->ick);
+	if (status != 0) {
+		dev_err(&pdev->dev, "failed to enable ick: %d\n", status);
+		goto err;
+	}
+
+	status = clk_prepare_enable(spi100k->fck);
+	if (status != 0) {
+		dev_err(&pdev->dev, "failed to enable fck: %d\n", status);
+		goto err_ick;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+
 	status = devm_spi_register_master(&pdev->dev, master);
 	if (status < 0)
-		goto err;
+		goto err_fck;
 
 	return status;
 
+err_fck:
+	clk_disable_unprepare(spi100k->fck);
+err_ick:
+	clk_disable_unprepare(spi100k->ick);
 err:
 	spi_master_put(master);
 	return status;
 }
 
+static int omap1_spi100k_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
+
+	pm_runtime_disable(&pdev->dev);
+
+	clk_disable_unprepare(spi100k->fck);
+	clk_disable_unprepare(spi100k->ick);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int omap1_spi100k_runtime_suspend(struct device *dev)
+{
+	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
+
+	clk_disable_unprepare(spi100k->ick);
+	clk_disable_unprepare(spi100k->fck);
+
+	return 0;
+}
+
+static int omap1_spi100k_runtime_resume(struct device *dev)
+{
+	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
+	int ret;
+
+	ret = clk_prepare_enable(spi100k->ick);
+	if (ret != 0) {
+		dev_err(dev, "Failed to enable ick: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(spi100k->fck);
+	if (ret != 0) {
+		dev_err(dev, "Failed to enable fck: %d\n", ret);
+		clk_disable_unprepare(spi100k->ick);
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops omap1_spi100k_pm = {
+	SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend,
+			   omap1_spi100k_runtime_resume, NULL)
+};
+
 static struct platform_driver omap1_spi100k_driver = {
 	.driver = {
 		.name		= "omap1_spi100k",
+		.pm		= &omap1_spi100k_pm,
 	},
 	.probe		= omap1_spi100k_probe,
+	.remove		= omap1_spi100k_remove,
 };
 
 module_platform_driver(omap1_spi100k_driver);

drivers/spi/spi-omap-uwire.c

@@ -44,7 +44,6 @@
 #include <linux/module.h>
 #include <linux/io.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 

drivers/spi/spi-pl022.c

@@ -285,7 +285,12 @@
  */
 #define DEFAULT_SSP_REG_IMSC  0x0UL
 #define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC
-#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC)
+#define ENABLE_ALL_INTERRUPTS ( \
+	SSP_IMSC_MASK_RORIM | \
+	SSP_IMSC_MASK_RTIM | \
+	SSP_IMSC_MASK_RXIM | \
+	SSP_IMSC_MASK_TXIM \
+)
 
 #define CLEAR_ALL_INTERRUPTS  0x3
 
@@ -1251,7 +1256,6 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
 	struct pl022 *pl022 = dev_id;
 	struct spi_message *msg = pl022->cur_msg;
 	u16 irq_status = 0;
-	u16 flag = 0;
 
 	if (unlikely(!msg)) {
 		dev_err(&pl022->adev->dev,
@@ -1280,9 +1284,6 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
 		if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF)
 			dev_err(&pl022->adev->dev,
 				"RXFIFO is full\n");
-		if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
-			dev_err(&pl022->adev->dev,
-				"TXFIFO is full\n");
 
 		/*
 		 * Disable and clear interrupts, disable SSP,
@@ -1303,8 +1304,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
 
 	readwriter(pl022);
 
-	if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
-		flag = 1;
+	if (pl022->tx == pl022->tx_end) {
 		/* Disable Transmit interrupt, enable receive interrupt */
 		writew((readw(SSP_IMSC(pl022->virtbase)) &
 		       ~SSP_IMSC_MASK_TXIM) | SSP_IMSC_MASK_RXIM,

drivers/spi/spi-pxa2xx.c

@@ -20,6 +20,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/spi/spi.h>
@@ -30,10 +31,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/acpi.h>
 
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-
 #include "spi-pxa2xx.h"
 
 MODULE_AUTHOR("Stephen Street");
@@ -67,54 +64,6 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 #define LPSS_TX_LOTHRESH_DFLT	160
 #define LPSS_TX_HITHRESH_DFLT	224
 
-struct quark_spi_rate {
-	u32 bitrate;
-	u32 dds_clk_rate;
-	u32 clk_div;
-};
-
-/*
- * 'rate', 'dds', 'clk_div' lookup table, which is defined in
- * the Quark SPI datasheet.
- */
-static const struct quark_spi_rate quark_spi_rate_table[] = {
-/*	bitrate,	dds_clk_rate,	clk_div */
-	{50000000,	0x800000,	0},
-	{40000000,	0x666666,	0},
-	{25000000,	0x400000,	0},
-	{20000000,	0x666666,	1},
-	{16667000,	0x800000,	2},
-	{13333000,	0x666666,	2},
-	{12500000,	0x200000,	0},
-	{10000000,	0x800000,	4},
-	{8000000,	0x666666,	4},
-	{6250000,	0x400000,	3},
-	{5000000,	0x400000,	4},
-	{4000000,	0x666666,	9},
-	{3125000,	0x80000,	0},
-	{2500000,	0x400000,	9},
-	{2000000,	0x666666,	19},
-	{1563000,	0x40000,	0},
-	{1250000,	0x200000,	9},
-	{1000000,	0x400000,	24},
-	{800000,	0x666666,	49},
-	{781250,	0x20000,	0},
-	{625000,	0x200000,	19},
-	{500000,	0x400000,	49},
-	{400000,	0x666666,	99},
-	{390625,	0x10000,	0},
-	{250000,	0x400000,	99},
-	{200000,	0x666666,	199},
-	{195313,	0x8000,		0},
-	{125000,	0x100000,	49},
-	{100000,	0x200000,	124},
-	{50000,		0x100000,	124},
-	{25000,		0x80000,	124},
-	{10016,		0x20000,	77},
-	{5040,		0x20000,	154},
-	{1002,		0x8000,		194},
-};
-
 /* Offset from drv_data->lpss_base */
 #define GENERAL_REG		0x08
 #define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24)
@@ -701,25 +650,124 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
 }
 
 /*
- * The Quark SPI data sheet gives a table, and for the given 'rate',
- * the 'dds' and 'clk_div' can be found in the table.
+ * The Quark SPI has an additional 24 bit register (DDS_CLK_RATE) to multiply
+ * input frequency by fractions of 2^24. It also has a divider by 5.
+ *
+ * There are formulas to get baud rate value for given input frequency and
+ * divider parameters, such as DDS_CLK_RATE and SCR:
+ *
+ * Fsys = 200MHz
+ *
+ * Fssp = Fsys * DDS_CLK_RATE / 2^24			(1)
+ * Baud rate = Fsclk = Fssp / (2 * (SCR + 1))		(2)
+ *
+ * DDS_CLK_RATE either 2^n or 2^n / 5.
+ * SCR is in range 0 .. 255
+ *
+ * Divisor = 5^i * 2^j * 2 * k
+ *       i = [0, 1]      i = 1 iff j = 0 or j > 3
+ *       j = [0, 23]     j = 0 iff i = 1
+ *       k = [1, 256]
+ * Special case: j = 0, i = 1: Divisor = 2 / 5
+ *
+ * Accordingly to the specification the recommended values for DDS_CLK_RATE
+ * are:
+ *	Case 1:		2^n, n = [0, 23]
+ *	Case 2:		2^24 * 2 / 5 (0x666666)
+ *	Case 3:		less than or equal to 2^24 / 5 / 16 (0x33333)
+ *
+ * In all cases the lowest possible value is better.
+ *
+ * The function calculates parameters for all cases and chooses the one closest
+ * to the asked baud rate.
  */
-static u32 quark_x1000_set_clk_regvals(u32 rate, u32 *dds, u32 *clk_div)
+static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds)
 {
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(quark_spi_rate_table); i++) {
-		if (rate >= quark_spi_rate_table[i].bitrate) {
-			*dds = quark_spi_rate_table[i].dds_clk_rate;
-			*clk_div = quark_spi_rate_table[i].clk_div;
-			return quark_spi_rate_table[i].bitrate;
+	unsigned long xtal = 200000000;
+	unsigned long fref = xtal / 2;		/* mandatory division by 2,
+						   see (2) */
+						/* case 3 */
+	unsigned long fref1 = fref / 2;		/* case 1 */
+	unsigned long fref2 = fref * 2 / 5;	/* case 2 */
+	unsigned long scale;
+	unsigned long q, q1, q2;
+	long r, r1, r2;
+	u32 mul;
+
+	/* Case 1 */
+
+	/* Set initial value for DDS_CLK_RATE */
+	mul = (1 << 24) >> 1;
+
+	/* Calculate initial quot */
+	q1 = DIV_ROUND_CLOSEST(fref1, rate);
+
+	/* Scale q1 if it's too big */
+	if (q1 > 256) {
+		/* Scale q1 to range [1, 512] */
+		scale = fls_long(q1 - 1);
+		if (scale > 9) {
+			q1 >>= scale - 9;
+			mul >>= scale - 9;
 		}
+
+		/* Round the result if we have a remainder */
+		q1 += q1 & 1;
 	}
 
-	*dds = quark_spi_rate_table[i-1].dds_clk_rate;
-	*clk_div = quark_spi_rate_table[i-1].clk_div;
+	/* Decrease DDS_CLK_RATE as much as we can without loss in precision */
+	scale = __ffs(q1);
+	q1 >>= scale;
+	mul >>= scale;
+
+	/* Get the remainder */
+	r1 = abs(fref1 / (1 << (24 - fls_long(mul))) / q1 - rate);
+
+	/* Case 2 */
+
+	q2 = DIV_ROUND_CLOSEST(fref2, rate);
+	r2 = abs(fref2 / q2 - rate);
 
-	return quark_spi_rate_table[i-1].bitrate;
+	/*
+	 * Choose the best between two: less remainder we have the better. We
+	 * can't go case 2 if q2 is greater than 256 since SCR register can
+	 * hold only values 0 .. 255.
+	 */
+	if (r2 >= r1 || q2 > 256) {
+		/* case 1 is better */
+		r = r1;
+		q = q1;
+	} else {
+		/* case 2 is better */
+		r = r2;
+		q = q2;
+		mul = (1 << 24) * 2 / 5;
+	}
+
+	/* Check case 3 only If the divisor is big enough */
+	if (fref / rate >= 80) {
+		u64 fssp;
+		u32 m;
+
+		/* Calculate initial quot */
+		q1 = DIV_ROUND_CLOSEST(fref, rate);
+		m = (1 << 24) / q1;
+
+		/* Get the remainder */
+		fssp = (u64)fref * m;
+		do_div(fssp, 1 << 24);
+		r1 = abs(fssp - rate);
+
+		/* Choose this one if it suits better */
+		if (r1 < r) {
+			/* case 3 is better */
+			q = 1;
+			mul = m;
+		}
+	}
+
+	*dds = mul;
+	return q - 1;
 }
 
 static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
@@ -730,23 +778,25 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 	rate = min_t(int, ssp_clk, rate);
 
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
-		return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
+		return (ssp_clk / (2 * rate) - 1) & 0xff;
 	else
-		return ((ssp_clk / rate - 1) & 0xfff) << 8;
+		return (ssp_clk / rate - 1) & 0xfff;
 }
 
 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
 					   struct chip_data *chip, int rate)
 {
-	u32 clk_div;
+	unsigned int clk_div;
 
 	switch (drv_data->ssp_type) {
 	case QUARK_X1000_SSP:
-		quark_x1000_set_clk_regvals(rate, &chip->dds_rate, &clk_div);
-		return clk_div << 8;
+		clk_div = quark_x1000_get_clk_div(rate, &chip->dds_rate);
+		break;
 	default:
-		return ssp_get_clk_div(drv_data, rate);
+		clk_div = ssp_get_clk_div(drv_data, rate);
+		break;
 	}
+	return clk_div << 8;
 }
 
 static void pump_transfers(unsigned long data)

drivers/spi/spi-rockchip.c

@@ -179,6 +179,7 @@ struct rockchip_spi {
 	u8 tmode;
 	u8 bpw;
 	u8 n_bytes;
+	u8 rsd_nsecs;
 	unsigned len;
 	u32 speed;
 
@@ -302,8 +303,8 @@ static int rockchip_spi_prepare_message(struct spi_master *master,
 	return 0;
 }
 
-static int rockchip_spi_unprepare_message(struct spi_master *master,
-					  struct spi_message *msg)
+static void rockchip_spi_handle_err(struct spi_master *master,
+				    struct spi_message *msg)
 {
 	unsigned long flags;
 	struct rockchip_spi *rs = spi_master_get_devdata(master);
@@ -313,8 +314,8 @@ static int rockchip_spi_unprepare_message(struct spi_master *master,
 	/*
 	 * For DMA mode, we need terminate DMA channel and flush
 	 * fifo for the next transfer if DMA thansfer timeout.
-	 * unprepare_message() was called by core if transfer complete
-	 * or timeout. Maybe it is reasonable for error handling here.
+	 * handle_err() was called by core if transfer failed.
+	 * Maybe it is reasonable for error handling here.
 	 */
 	if (rs->use_dma) {
 		if (rs->state & RXBUSY) {
@@ -327,6 +328,12 @@ static int rockchip_spi_unprepare_message(struct spi_master *master,
 	}
 
 	spin_unlock_irqrestore(&rs->lock, flags);
+}
+
+static int rockchip_spi_unprepare_message(struct spi_master *master,
+					  struct spi_message *msg)
+{
+	struct rockchip_spi *rs = spi_master_get_devdata(master);
 
 	spi_enable_chip(rs, 0);
 
@@ -493,6 +500,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
 {
 	u32 div = 0;
 	u32 dmacr = 0;
+	int rsd = 0;
 
 	u32 cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET)
 		| (CR0_SSD_ONE << CR0_SSD_OFFSET);
@@ -519,9 +527,23 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
 	}
 
 	/* div doesn't support odd number */
-	div = max_t(u32, rs->max_freq / rs->speed, 1);
+	div = DIV_ROUND_UP(rs->max_freq, rs->speed);
 	div = (div + 1) & 0xfffe;
 
+	/* Rx sample delay is expressed in parent clock cycles (max 3) */
+	rsd = DIV_ROUND_CLOSEST(rs->rsd_nsecs * (rs->max_freq >> 8),
+				1000000000 >> 8);
+	if (!rsd && rs->rsd_nsecs) {
+		pr_warn_once("rockchip-spi: %u Hz are too slow to express %u ns delay\n",
+			     rs->max_freq, rs->rsd_nsecs);
+	} else if (rsd > 3) {
+		rsd = 3;
+		pr_warn_once("rockchip-spi: %u Hz are too fast to express %u ns delay, clamping at %u ns\n",
+			     rs->max_freq, rs->rsd_nsecs,
+			     rsd * 1000000000U / rs->max_freq);
+	}
+	cr0 |= rsd << CR0_RSD_OFFSET;
+
 	writel_relaxed(cr0, rs->regs + ROCKCHIP_SPI_CTRLR0);
 
 	writel_relaxed(rs->len - 1, rs->regs + ROCKCHIP_SPI_CTRLR1);
@@ -614,6 +636,7 @@ static int rockchip_spi_probe(struct platform_device *pdev)
 	struct rockchip_spi *rs;
 	struct spi_master *master;
 	struct resource *mem;
+	u32 rsd_nsecs;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(struct rockchip_spi));
 	if (!master)
@@ -665,6 +688,10 @@ static int rockchip_spi_probe(struct platform_device *pdev)
 	rs->dev = &pdev->dev;
 	rs->max_freq = clk_get_rate(rs->spiclk);
 
+	if (!of_property_read_u32(pdev->dev.of_node, "rx-sample-delay-ns",
+				  &rsd_nsecs))
+		rs->rsd_nsecs = rsd_nsecs;
+
 	rs->fifo_len = get_fifo_len(rs);
 	if (!rs->fifo_len) {
 		dev_err(&pdev->dev, "Failed to get fifo length\n");
@@ -688,6 +715,7 @@ static int rockchip_spi_probe(struct platform_device *pdev)
 	master->prepare_message = rockchip_spi_prepare_message;
 	master->unprepare_message = rockchip_spi_unprepare_message;
 	master->transfer_one = rockchip_spi_transfer_one;
+	master->handle_err = rockchip_spi_handle_err;
 
 	rs->dma_tx.ch = dma_request_slave_channel(rs->dev, "tx");
 	if (!rs->dma_tx.ch)

drivers/spi/spi-rspi.c

@@ -177,6 +177,13 @@
 #define SPBFCR_RXRST		0x40	/* Receive Buffer Data Reset */
 #define SPBFCR_TXTRG_MASK	0x30	/* Transmit Buffer Data Triggering Number */
 #define SPBFCR_RXTRG_MASK	0x07	/* Receive Buffer Data Triggering Number */
+/* QSPI on R-Car Gen2 */
+#define SPBFCR_TXTRG_1B		0x00	/* 31 bytes (1 byte available) */
+#define SPBFCR_TXTRG_32B	0x30	/* 0 byte (32 bytes available) */
+#define SPBFCR_RXTRG_1B		0x00	/* 1 byte (31 bytes available) */
+#define SPBFCR_RXTRG_32B	0x07	/* 32 bytes (0 byte available) */
+
+#define QSPI_BUFFER_SIZE        32u
 
 struct rspi_data {
 	void __iomem *addr;
@@ -366,6 +373,52 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
 	return 0;
 }
 
+static void qspi_update(const struct rspi_data *rspi, u8 mask, u8 val, u8 reg)
+{
+	u8 data;
+
+	data = rspi_read8(rspi, reg);
+	data &= ~mask;
+	data |= (val & mask);
+	rspi_write8(rspi, data, reg);
+}
+
+static int qspi_set_send_trigger(struct rspi_data *rspi, unsigned int len)
+{
+	unsigned int n;
+
+	n = min(len, QSPI_BUFFER_SIZE);
+
+	if (len >= QSPI_BUFFER_SIZE) {
+		/* sets triggering number to 32 bytes */
+		qspi_update(rspi, SPBFCR_TXTRG_MASK,
+			     SPBFCR_TXTRG_32B, QSPI_SPBFCR);
+	} else {
+		/* sets triggering number to 1 byte */
+		qspi_update(rspi, SPBFCR_TXTRG_MASK,
+			     SPBFCR_TXTRG_1B, QSPI_SPBFCR);
+	}
+
+	return n;
+}
+
+static void qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
+{
+	unsigned int n;
+
+	n = min(len, QSPI_BUFFER_SIZE);
+
+	if (len >= QSPI_BUFFER_SIZE) {
+		/* sets triggering number to 32 bytes */
+		qspi_update(rspi, SPBFCR_RXTRG_MASK,
+			     SPBFCR_RXTRG_32B, QSPI_SPBFCR);
+	} else {
+		/* sets triggering number to 1 byte */
+		qspi_update(rspi, SPBFCR_RXTRG_MASK,
+			     SPBFCR_RXTRG_1B, QSPI_SPBFCR);
+	}
+}
+
 #define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
 
 static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable)
@@ -609,19 +662,29 @@ static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
 	return __rspi_can_dma(rspi, xfer);
 }
 
-static int rspi_common_transfer(struct rspi_data *rspi,
-				struct spi_transfer *xfer)
+static int rspi_dma_check_then_transfer(struct rspi_data *rspi,
+					 struct spi_transfer *xfer)
 {
-	int ret;
-
 	if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
 		/* rx_buf can be NULL on RSPI on SH in TX-only Mode */
-		ret = rspi_dma_transfer(rspi, &xfer->tx_sg,
+		int ret = rspi_dma_transfer(rspi, &xfer->tx_sg,
 					xfer->rx_buf ? &xfer->rx_sg : NULL);
 		if (ret != -EAGAIN)
-			return ret;
+			return 0;
 	}
 
+	return -EAGAIN;
+}
+
+static int rspi_common_transfer(struct rspi_data *rspi,
+				struct spi_transfer *xfer)
+{
+	int ret;
+
+	ret = rspi_dma_check_then_transfer(rspi, xfer);
+	if (ret != -EAGAIN)
+		return ret;
+
 	ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
 	if (ret < 0)
 		return ret;
@@ -661,12 +724,59 @@ static int rspi_rz_transfer_one(struct spi_master *master,
 	return rspi_common_transfer(rspi, xfer);
 }
 
+static int qspi_trigger_transfer_out_int(struct rspi_data *rspi, const u8 *tx,
+					u8 *rx, unsigned int len)
+{
+	int i, n, ret;
+	int error;
+
+	while (len > 0) {
+		n = qspi_set_send_trigger(rspi, len);
+		qspi_set_receive_trigger(rspi, len);
+		if (n == QSPI_BUFFER_SIZE) {
+			error = rspi_wait_for_tx_empty(rspi);
+			if (error < 0) {
+				dev_err(&rspi->master->dev, "transmit timeout\n");
+				return error;
+			}
+			for (i = 0; i < n; i++)
+				rspi_write_data(rspi, *tx++);
+
+			error = rspi_wait_for_rx_full(rspi);
+			if (error < 0) {
+				dev_err(&rspi->master->dev, "receive timeout\n");
+				return error;
+			}
+			for (i = 0; i < n; i++)
+				*rx++ = rspi_read_data(rspi);
+		} else {
+			ret = rspi_pio_transfer(rspi, tx, rx, n);
+			if (ret < 0)
+				return ret;
+		}
+		len -= n;
+	}
+
+	return 0;
+}
+
 static int qspi_transfer_out_in(struct rspi_data *rspi,
 				struct spi_transfer *xfer)
 {
+	int ret;
+
 	qspi_receive_init(rspi);
 
-	return rspi_common_transfer(rspi, xfer);
+	ret = rspi_dma_check_then_transfer(rspi, xfer);
+	if (ret != -EAGAIN)
+		return ret;
+
+	ret = qspi_trigger_transfer_out_int(rspi, xfer->tx_buf,
+					    xfer->rx_buf, xfer->len);
+	if (ret < 0)
+		return ret;
+
+	return 0;
 }
 
 static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)

drivers/spi/spi-s3c64xx.c

@@ -324,7 +324,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
 
 		/* Acquire DMA channels */
 		sdd->rx_dma.ch = dma_request_slave_channel_compat(mask, filter,
-				   (void *)sdd->rx_dma.dmach, dev, "rx");
+				   (void *)(long)sdd->rx_dma.dmach, dev, "rx");
 		if (!sdd->rx_dma.ch) {
 			dev_err(dev, "Failed to get RX DMA channel\n");
 			ret = -EBUSY;
@@ -333,7 +333,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
 		spi->dma_rx = sdd->rx_dma.ch;
 
 		sdd->tx_dma.ch = dma_request_slave_channel_compat(mask, filter,
-				   (void *)sdd->tx_dma.dmach, dev, "tx");
+				   (void *)(long)sdd->tx_dma.dmach, dev, "tx");
 		if (!sdd->tx_dma.ch) {
 			dev_err(dev, "Failed to get TX DMA channel\n");
 			ret = -EBUSY;

drivers/spi/spi-sc18is602.c

@@ -286,7 +286,7 @@ static int sc18is602_probe(struct i2c_client *client,
 			hw->freq = SC18IS602_CLOCK;
 		break;
 	}
-	master->bus_num = client->adapter->nr;
+	master->bus_num = np ? -1 : client->adapter->nr;
 	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
 	master->setup = sc18is602_setup;

drivers/spi/spi-st-ssc4.c

@@ -482,7 +482,7 @@ static const struct dev_pm_ops spi_st_pm = {
 	SET_RUNTIME_PM_OPS(spi_st_runtime_suspend, spi_st_runtime_resume, NULL)
 };
 
-static struct of_device_id stm_spi_match[] = {
+static const struct of_device_id stm_spi_match[] = {
 	{ .compatible = "st,comms-ssc4-spi", },
 	{},
 };

drivers/spi/spi.c

@@ -16,7 +16,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/kmod.h>
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/cache.h>
@@ -129,125 +128,11 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int spi_legacy_suspend(struct device *dev, pm_message_t message)
-{
-	int			value = 0;
-	struct spi_driver	*drv = to_spi_driver(dev->driver);
-
-	/* suspend will stop irqs and dma; no more i/o */
-	if (drv) {
-		if (drv->suspend)
-			value = drv->suspend(to_spi_device(dev), message);
-		else
-			dev_dbg(dev, "... can't suspend\n");
-	}
-	return value;
-}
-
-static int spi_legacy_resume(struct device *dev)
-{
-	int			value = 0;
-	struct spi_driver	*drv = to_spi_driver(dev->driver);
-
-	/* resume may restart the i/o queue */
-	if (drv) {
-		if (drv->resume)
-			value = drv->resume(to_spi_device(dev));
-		else
-			dev_dbg(dev, "... can't resume\n");
-	}
-	return value;
-}
-
-static int spi_pm_suspend(struct device *dev)
-{
-	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
-	if (pm)
-		return pm_generic_suspend(dev);
-	else
-		return spi_legacy_suspend(dev, PMSG_SUSPEND);
-}
-
-static int spi_pm_resume(struct device *dev)
-{
-	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
-	if (pm)
-		return pm_generic_resume(dev);
-	else
-		return spi_legacy_resume(dev);
-}
-
-static int spi_pm_freeze(struct device *dev)
-{
-	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
-	if (pm)
-		return pm_generic_freeze(dev);
-	else
-		return spi_legacy_suspend(dev, PMSG_FREEZE);
-}
-
-static int spi_pm_thaw(struct device *dev)
-{
-	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
-	if (pm)
-		return pm_generic_thaw(dev);
-	else
-		return spi_legacy_resume(dev);
-}
-
-static int spi_pm_poweroff(struct device *dev)
-{
-	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
-	if (pm)
-		return pm_generic_poweroff(dev);
-	else
-		return spi_legacy_suspend(dev, PMSG_HIBERNATE);
-}
-
-static int spi_pm_restore(struct device *dev)
-{
-	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
-	if (pm)
-		return pm_generic_restore(dev);
-	else
-		return spi_legacy_resume(dev);
-}
-#else
-#define spi_pm_suspend	NULL
-#define spi_pm_resume	NULL
-#define spi_pm_freeze	NULL
-#define spi_pm_thaw	NULL
-#define spi_pm_poweroff	NULL
-#define spi_pm_restore	NULL
-#endif
-
-static const struct dev_pm_ops spi_pm = {
-	.suspend = spi_pm_suspend,
-	.resume = spi_pm_resume,
-	.freeze = spi_pm_freeze,
-	.thaw = spi_pm_thaw,
-	.poweroff = spi_pm_poweroff,
-	.restore = spi_pm_restore,
-	SET_RUNTIME_PM_OPS(
-		pm_generic_runtime_suspend,
-		pm_generic_runtime_resume,
-		NULL
-	)
-};
-
 struct bus_type spi_bus_type = {
 	.name		= "spi",
 	.dev_groups	= spi_dev_groups,
 	.match		= spi_match_device,
 	.uevent		= spi_uevent,
-	.pm		= &spi_pm,
 };
 EXPORT_SYMBOL_GPL(spi_bus_type);
 
@@ -698,6 +583,15 @@ static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
 	rx_dev = master->dma_rx->device->dev;
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+		/*
+		 * Restore the original value of tx_buf or rx_buf if they are
+		 * NULL.
+		 */
+		if (xfer->tx_buf == master->dummy_tx)
+			xfer->tx_buf = NULL;
+		if (xfer->rx_buf == master->dummy_rx)
+			xfer->rx_buf = NULL;
+
 		if (!master->can_dma(master, msg->spi, xfer))
 			continue;
 
@@ -851,6 +745,9 @@ static int spi_transfer_one_message(struct spi_master *master,
 	if (msg->status == -EINPROGRESS)
 		msg->status = ret;
 
+	if (msg->status && master->handle_err)
+		master->handle_err(master, msg);
+
 	spi_finalize_current_message(master);
 
 	return ret;
@@ -1360,7 +1257,6 @@ of_register_spi_device(struct spi_master *master, struct device_node *nc)
 	spi->dev.of_node = nc;
 
 	/* Register the new device */
-	request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias);
 	rc = spi_add_device(spi);
 	if (rc) {
 		dev_err(&master->dev, "spi_device register error %s\n",
@@ -1894,6 +1790,8 @@ int spi_setup(struct spi_device *spi)
 	if (!spi->max_speed_hz)
 		spi->max_speed_hz = spi->master->max_speed_hz;
 
+	spi_set_cs(spi, false);
+
 	if (spi->master->setup)
 		status = spi->master->setup(spi);