Merge tag 'nand/pxa3xx-removal' of git://git.infradead.org/linux-mtd into nand/next

Remove the pxa3xx_nand driver (replaced by marvell_nand).

Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt

-PXA3xx NAND DT bindings
-
-Required properties:
-
- - compatible:		Should be set to one of the following:
-			marvell,pxa3xx-nand
-			marvell,armada370-nand
-			marvell,armada-8k-nand
- - reg: 		The register base for the controller
- - interrupts:		The interrupt to map
- - #address-cells:	Set to <1> if the node includes partitions
- - marvell,system-controller: Set to retrieve the syscon node that handles
-			NAND controller related registers (only required
-			with marvell,armada-8k-nand compatible).
-
-Optional properties:
-
- - dmas:			dma data channel, see dma.txt binding doc
- - marvell,nand-enable-arbiter:	Set to enable the bus arbiter
- - marvell,nand-keep-config:	Set to keep the NAND controller config as set
-				by the bootloader
- - num-cs:			Number of chipselect lines to use
- - nand-on-flash-bbt: 		boolean to enable on flash bbt option if
-				not present false
- - nand-ecc-strength:           number of bits to correct per ECC step
- - nand-ecc-step-size:          number of data bytes covered by a single ECC step
-
-The following ECC strength and step size are currently supported:
-
- - nand-ecc-strength = <1>, nand-ecc-step-size = <512>
- - nand-ecc-strength = <4>, nand-ecc-step-size = <512>
- - nand-ecc-strength = <8>, nand-ecc-step-size = <512>
-
-Example:
-
-	nand0: nand@43100000 {
-		compatible = "marvell,pxa3xx-nand";
-		reg = <0x43100000 90>;
-		interrupts = <45>;
-		dmas = <&pdma 97 0>;
-		dma-names = "data";
-		#address-cells = <1>;
-
-		marvell,nand-enable-arbiter;
-		marvell,nand-keep-config;
-		num-cs = <1>;
-
-		/* partitions (optional) */
-	};
-

MAINTAINERS

@@ -11327,12 +11327,6 @@ F:	include/sound/pxa2xx-lib.h
 F:	sound/arm/pxa*
 F:	sound/soc/pxa/
 
-PXA3xx NAND FLASH DRIVER
-M:	Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-L:	linux-mtd@lists.infradead.org
-S:	Maintained
-F:	drivers/mtd/nand/raw/pxa3xx_nand.c
-
 QAT DRIVER
 M:	Giovanni Cabiddu <giovanni.cabiddu@intel.com>
 L:	qat-linux@intel.com

arch/arm/boot/dts/pxa3xx.dtsi

@@ -117,15 +117,15 @@ pwri2c: i2c@40f500c0 {
 			status = "disabled";
 		};
 
-		nand0: nand@43100000 {
-			compatible = "marvell,pxa3xx-nand";
+		nand_controller: nand-controller@43100000 {
+			compatible = "marvell,pxa3xx-nand-controller";
 			reg = <0x43100000 90>;
 			interrupts = <45>;
 			clocks = <&clks CLK_NAND>;
 			dmas = <&pdma 97 3>;
 			dma-names = "data";
 			#address-cells = <1>;
-			#size-cells = <1>;	
+			#size-cells = <0>;
 			status = "disabled";
 		};
 

arch/arm/configs/cm_x300_defconfig

@@ -49,7 +49,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/arm/configs/pxa3xx_defconfig

@@ -32,8 +32,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y

arch/arm/configs/pxa_defconfig

@@ -197,7 +197,7 @@ CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
 CONFIG_MTD_NAND_SHARPSL=m
-CONFIG_MTD_NAND_PXA3xx=m
+CONFIG_MTD_NAND_MARVELL=m
 CONFIG_MTD_NAND_CM_X270=m
 CONFIG_MTD_NAND_TMIO=m
 CONFIG_MTD_NAND_BRCMNAND=m

arch/arm/configs/raumfeld_defconfig

@@ -33,7 +33,7 @@ CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
 CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_ISL29003=y

arch/arm/mach-mmp/aspenite.c

@@ -172,10 +172,8 @@ static struct mtd_partition aspenite_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data aspenite_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs = 1,
-	.parts[0]	= aspenite_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(aspenite_nand_partitions),
+	.parts		= aspenite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
 };
 
 static struct i2c_board_info aspenite_i2c_info[] __initdata = {

arch/arm/mach-mmp/ttc_dkb.c

@@ -178,11 +178,8 @@ static struct mv_usb_platform_data ttc_usb_pdata = {
 #endif
 #endif
 
-#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
-static struct pxa3xx_nand_platform_data dkb_nand_info = {
-	.enable_arbiter = 1,
-	.num_cs = 1,
-};
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
+static struct pxa3xx_nand_platform_data dkb_nand_info = {};
 #endif
 
 #if IS_ENABLED(CONFIG_MMP_DISP)
@@ -275,7 +272,7 @@ static void __init ttc_dkb_init(void)
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
-#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 	pxa910_add_nand(&dkb_nand_info);
 #endif
 

arch/arm/mach-pxa/cm-x300.c

@@ -391,7 +391,7 @@ static void __init cm_x300_init_ac97(void)
 static inline void cm_x300_init_ac97(void) {}
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition cm_x300_nand_partitions[] = {
 	[0] = {
 		.name        = "OBM",
@@ -429,11 +429,9 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= cm_x300_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(cm_x300_nand_partitions),
+	.parts		= cm_x300_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
 };
 
 static void __init cm_x300_init_nand(void)

arch/arm/mach-pxa/colibri-pxa3xx.c

@@ -110,7 +110,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
 }
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition colibri_nand_partitions[] = {
 	{
 		.name        = "bootloader",
@@ -138,11 +138,9 @@ static struct mtd_partition colibri_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data colibri_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= colibri_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(colibri_nand_partitions),
+	.parts		= colibri_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
 };
 
 void __init colibri_pxa3xx_init_nand(void)

arch/arm/mach-pxa/colibri.h

@@ -46,7 +46,7 @@ static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
 extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 extern void colibri_pxa3xx_init_nand(void);
 #else
 static inline void colibri_pxa3xx_init_nand(void) {}

arch/arm/mach-pxa/littleton.c

@@ -291,7 +291,7 @@ static void __init littleton_init_mmc(void)
 static inline void littleton_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition littleton_nand_partitions[] = {
 	[0] = {
 		.name        = "Bootloader",
@@ -329,10 +329,8 @@ static struct mtd_partition littleton_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data littleton_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs		= 1,
-	.parts[0]	= littleton_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(littleton_nand_partitions),
+	.parts		= littleton_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
 };
 
 static void __init littleton_init_nand(void)
@@ -341,7 +339,7 @@ static void __init littleton_init_nand(void)
 }
 #else
 static inline void littleton_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
 
 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
 static struct led_info littleton_da9034_leds[] = {

arch/arm/mach-pxa/mxm8x10.c

@@ -359,7 +359,7 @@ void __init mxm_8x10_ac97_init(void)
 }
 
 /* NAND flash Support */
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 #define NAND_BLOCK_SIZE SZ_128K
 #define NB(x)           (NAND_BLOCK_SIZE * (x))
 static struct mtd_partition mxm_8x10_nand_partitions[] = {
@@ -389,11 +389,9 @@ static struct mtd_partition mxm_8x10_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= mxm_8x10_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(mxm_8x10_nand_partitions)
+	.parts		= mxm_8x10_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(mxm_8x10_nand_partitions)
 };
 
 static void __init mxm_8x10_nand_init(void)
@@ -402,7 +400,7 @@ static void __init mxm_8x10_nand_init(void)
 }
 #else
 static inline void mxm_8x10_nand_init(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
 
 /* Ethernet support: Davicom DM9000 */
 static struct resource dm9k_resources[] = {

arch/arm/mach-pxa/raumfeld.c

@@ -346,11 +346,9 @@ static struct mtd_partition raumfeld_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= raumfeld_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(raumfeld_nand_partitions),
+	.parts		= raumfeld_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(raumfeld_nand_partitions),
 };
 
 /**

arch/arm/mach-pxa/zylonite.c

@@ -338,7 +338,7 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition zylonite_nand_partitions[] = {
 	[0] = {
 		.name        = "Bootloader",
@@ -376,10 +376,8 @@ static struct mtd_partition zylonite_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data zylonite_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs		= 1,
-	.parts[0]	= zylonite_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(zylonite_nand_partitions),
+	.parts		= zylonite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
 };
 
 static void __init zylonite_init_nand(void)
@@ -388,7 +386,7 @@ static void __init zylonite_init_nand(void)
 }
 #else
 static inline void zylonite_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static struct pxaohci_platform_data zylonite_ohci_info = {

drivers/mtd/nand/raw/Kconfig

@@ -313,17 +313,6 @@ config MTD_NAND_ATMEL
 	  Enables support for NAND Flash / Smart Media Card interface
 	  on Atmel AT91 processors.
 
-config MTD_NAND_PXA3xx
-	tristate "NAND support on PXA3xx and Armada 370/XP"
-	depends on !MTD_NAND_MARVELL
-	depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU
-	help
-
-	  This enables the driver for the NAND flash device found on
-	  PXA3xx processors (NFCv1) and also on 32-bit Armada
-	  platforms (XP, 370, 375, 38x, 39x) and 64-bit Armada
-	  platforms (7K, 8K) (NFCv2).
-
 config MTD_NAND_MARVELL
 	tristate "NAND controller support on Marvell boards"
 	depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \

drivers/mtd/nand/raw/Makefile

@@ -28,7 +28,6 @@ omap2_nand-objs := omap2.o
 obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o
 obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
-obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
 obj-$(CONFIG_MTD_NAND_MARVELL)		+= marvell_nand.o
 obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o

drivers/mtd/nand/raw/marvell_nand.c

@@ -2539,8 +2539,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
 
 	if (pdata)
 		/* Legacy bindings support only one chip */
-		ret = mtd_device_register(mtd, pdata->parts[0],
-					  pdata->nr_parts[0]);
+		ret = mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
 	else
 		ret = mtd_device_register(mtd, NULL, 0);
 	if (ret) {

include/linux/platform_data/mtd-nand-pxa3xx.h

@@ -6,41 +6,22 @@
 #include <linux/mtd/partitions.h>
 
 /*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
+ * Current pxa3xx_nand controller has two chip select which both be workable but
+ * historically all platforms remaining on platform data used only one. Switch
+ * to device tree if you need more.
  */
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT		(2)
 struct pxa3xx_nand_platform_data {
-
-	/* the data flash bus is shared between the Static Memory
-	 * Controller and the Data Flash Controller,  the arbiter
-	 * controls the ownership of the bus
-	 */
-	int	enable_arbiter;
-
-	/* allow platform code to keep OBM/bootloader defined NFC config */
-	int	keep_config;
-
-	/* indicate how many chip selects will be used */
-	int	num_cs;
-
-	/* use an flash-based bad block table */
-	bool	flash_bbt;
-
-	/* requested ECC strength and ECC step size */
+	/* Keep OBM/bootloader NFC timing configuration */
+	bool keep_config;
+	/* Use a flash-based bad block table */
+	bool flash_bbt;
+	/* Requested ECC strength and ECC step size */
 	int ecc_strength, ecc_step_size;
-
-	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
-	unsigned int				nr_parts[NUM_CHIP_SELECT];
+	/* Partitions */
+	const struct mtd_partition *parts;
+	unsigned int nr_parts;
 };
 
 extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+
 #endif /* __ASM_ARCH_PXA3XX_NAND_H */