Commit 33b18a60 authored by Sergei Shtylyov's avatar Sergei Shtylyov Committed by Linus Torvalds

[PATCH] ide: fix HPT3xx hotswap support

Fix the broken hotswap code: on HPT37x it caused RESET- to glitch when
tristating the bus (the MISC control 3/6 and soft control 2 need to be written
to in the certain order), and for HPT36x the obsolete HDIO_TRISTATE_HWIF
ioctl() handler was called instead which treated the state argument wrong.
Also, get rid of the soft control reg.  1 wtite to enable IDE interrupt --
this is done in init_hpt37x() already...

Have been tested on HPT370 and 371N.
Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 471a0bda
...@@ -70,6 +70,8 @@ ...@@ -70,6 +70,8 @@
* - fix/remove bad/unused timing tables and use one set of tables for the whole * - fix/remove bad/unused timing tables and use one set of tables for the whole
* HPT37x chip family; save space by introducing the separate transfer mode * HPT37x chip family; save space by introducing the separate transfer mode
* table in which the mode lookup is done * table in which the mode lookup is done
* - fix the hotswap code: it caused RESET- to glitch when tristating the bus,
* and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead
* <source@mvista.com> * <source@mvista.com>
* *
*/ */
...@@ -914,101 +916,68 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) ...@@ -914,101 +916,68 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
hpt3xxn_set_clock(hwif, wantclock); hpt3xxn_set_clock(hwif, wantclock);
} }
/*
* Since SUN Cobalt is attempting to do this operation, I should disclose
* this has been a long time ago Thu Jul 27 16:40:57 2000 was the patch date
* HOTSWAP ATA Infrastructure.
*/
static void hpt3xx_reset (ide_drive_t *drive)
{
}
static int hpt3xx_tristate (ide_drive_t * drive, int state)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 reg59h = 0, reset = (hwif->channel) ? 0x80 : 0x40;
u8 regXXh = 0, state_reg= (hwif->channel) ? 0x57 : 0x53;
pci_read_config_byte(dev, 0x59, &reg59h);
pci_read_config_byte(dev, state_reg, &regXXh);
if (state) {
(void) ide_do_reset(drive);
pci_write_config_byte(dev, state_reg, regXXh|0x80);
pci_write_config_byte(dev, 0x59, reg59h|reset);
} else {
pci_write_config_byte(dev, 0x59, reg59h & ~(reset));
pci_write_config_byte(dev, state_reg, regXXh & ~(0x80));
(void) ide_do_reset(drive);
}
return 0;
}
/* /*
* set/get power state for a drive. * Set/get power state for a drive.
* turning the power off does the following things:
* 1) soft-reset the drive
* 2) tri-states the ide bus
* *
* when we turn things back on, we need to re-initialize things. * When we turn the power back on, we need to re-initialize things.
*/ */
#define TRISTATE_BIT 0x8000 #define TRISTATE_BIT 0x8000
static int hpt370_busproc(ide_drive_t * drive, int state)
static int hpt3xx_busproc(ide_drive_t *drive, int state)
{ {
ide_hwif_t *hwif = drive->hwif; ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = hwif->pci_dev; struct pci_dev *dev = hwif->pci_dev;
u8 tristate = 0, resetmask = 0, bus_reg = 0; u8 tristate, resetmask, bus_reg = 0;
u16 tri_reg; u16 tri_reg = 0;
hwif->bus_state = state; hwif->bus_state = state;
if (hwif->channel) { if (hwif->channel) {
/* secondary channel */ /* secondary channel */
tristate = 0x56; tristate = 0x56;
resetmask = 0x80; resetmask = 0x80;
} else { } else {
/* primary channel */ /* primary channel */
tristate = 0x52; tristate = 0x52;
resetmask = 0x40; resetmask = 0x40;
} }
/* grab status */ /* Grab the status. */
pci_read_config_word(dev, tristate, &tri_reg); pci_read_config_word(dev, tristate, &tri_reg);
pci_read_config_byte(dev, 0x59, &bus_reg); pci_read_config_byte(dev, 0x59, &bus_reg);
/* set the state. we don't set it if we don't need to do so. /*
* make sure that the drive knows that it has failed if it's off */ * Set the state. We don't set it if we don't need to do so.
* Make sure that the drive knows that it has failed if it's off.
*/
switch (state) { switch (state) {
case BUSSTATE_ON: case BUSSTATE_ON:
hwif->drives[0].failures = 0; if (!(bus_reg & resetmask))
hwif->drives[1].failures = 0;
if ((bus_reg & resetmask) == 0)
return 0; return 0;
tri_reg &= ~TRISTATE_BIT; hwif->drives[0].failures = hwif->drives[1].failures = 0;
bus_reg &= ~resetmask;
break; pci_write_config_byte(dev, 0x59, bus_reg & ~resetmask);
pci_write_config_word(dev, tristate, tri_reg & ~TRISTATE_BIT);
return 0;
case BUSSTATE_OFF: case BUSSTATE_OFF:
hwif->drives[0].failures = hwif->drives[0].max_failures + 1; if ((bus_reg & resetmask) && !(tri_reg & TRISTATE_BIT))
hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
if ((tri_reg & TRISTATE_BIT) == 0 && (bus_reg & resetmask))
return 0; return 0;
tri_reg &= ~TRISTATE_BIT; tri_reg &= ~TRISTATE_BIT;
bus_reg |= resetmask;
break; break;
case BUSSTATE_TRISTATE: case BUSSTATE_TRISTATE:
hwif->drives[0].failures = hwif->drives[0].max_failures + 1; if ((bus_reg & resetmask) && (tri_reg & TRISTATE_BIT))
hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
if ((tri_reg & TRISTATE_BIT) && (bus_reg & resetmask))
return 0; return 0;
tri_reg |= TRISTATE_BIT; tri_reg |= TRISTATE_BIT;
bus_reg |= resetmask;
break; break;
default:
return -EINVAL;
} }
pci_write_config_byte(dev, 0x59, bus_reg);
pci_write_config_word(dev, tristate, tri_reg);
hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
pci_write_config_word(dev, tristate, tri_reg);
pci_write_config_byte(dev, 0x59, bus_reg | resetmask);
return 0; return 0;
} }
...@@ -1306,23 +1275,11 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) ...@@ -1306,23 +1275,11 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
if (serialize && hwif->mate) if (serialize && hwif->mate)
hwif->serialized = hwif->mate->serialized = 1; hwif->serialized = hwif->mate->serialized = 1;
if (info->revision >= 3) { /*
u8 reg5ah = 0; * Set up ioctl for power status.
pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10); * NOTE: power affects both drives on each channel.
/* */
* set up ioctl for power status. hwif->busproc = &hpt3xx_busproc;
* note: power affects both
* drives on each channel
*/
hwif->resetproc = &hpt3xx_reset;
hwif->busproc = &hpt370_busproc;
} else if (info->revision >= 2) {
hwif->resetproc = &hpt3xx_reset;
hwif->busproc = &hpt3xx_tristate;
} else {
hwif->resetproc = &hpt3xx_reset;
hwif->busproc = &hpt3xx_tristate;
}
if (!hwif->dma_base) { if (!hwif->dma_base) {
hwif->drives[0].autotune = 1; hwif->drives[0].autotune = 1;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment