arm64: dts: renesas: Add condor-common.dtsi

We have V3H Condor board, and will have V3H2 Condor-I board.
This patch adds condor-common.dtsi to share the common settings
between these boards.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qsy625m.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm64/boot/dts/renesas/condor-common.dtsi

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor board with R-Car V3H
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &scif0;
+		ethernet0 = &gether;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	d1_8v: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	d3_3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&d3_3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0 0x48000000 0 0x78000000>;
+	};
+
+	vddq_vin01: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ_VIN01";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	x1_clk: x1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out0>;
+			};
+		};
+	};
+};
+
+&csi41 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi41_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out1>;
+			};
+		};
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&x1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander0: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander1: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		bgvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	gmsl0: gmsl-deserializer@48 {
+		compatible = "maxim,max9286";
+		reg = <0x48>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out0: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4a {
+		compatible = "maxim,max9286";
+		reg = <0x4a>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out1: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi41_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&vddq_vin01>;
+	mmc-hs200-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pfc {
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data_a";
+		function = "canfd0";
+	};
+
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};

arch/arm64/boot/dts/renesas/r8a77980-condor.dts

@@ -8,547 +8,9 @@
 
 /dts-v1/;
 #include "r8a77980.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "condor-common.dtsi"
 
 / {
 	model = "Renesas Condor board based on r8a77980";
 	compatible = "renesas,condor", "renesas,r8a77980";
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		serial0 = &scif0;
-		ethernet0 = &gether;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	d1_8v: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "D1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	d3_3v: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "D3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	lvds-decoder {
-		compatible = "thine,thc63lvd1024";
-		vcc-supply = <&d3_3v>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				thc63lvd1024_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				thc63lvd1024_out: endpoint {
-					remote-endpoint = <&adv7511_in>;
-				};
-			};
-		};
-	};
-
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0 0x48000000 0 0x78000000>;
-	};
-
-	vddq_vin01: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDQ_VIN01";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	x1_clk: x1-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-};
-
-&canfd {
-	pinctrl-0 = <&canfd0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	channel0 {
-		status = "okay";
-	};
-};
-
-&csi40 {
-	status = "okay";
-
-	ports {
-		port@0 {
-			csi40_in: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&max9286_out0>;
-			};
-		};
-	};
-};
-
-&csi41 {
-	status = "okay";
-
-	ports {
-		port@0 {
-			csi41_in: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&max9286_out1>;
-			};
-		};
-	};
-};
-
-&du {
-	clocks = <&cpg CPG_MOD 724>,
-		 <&x1_clk>;
-	clock-names = "du.0", "dclkin.0";
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <16666666>;
-};
-
-&extalr_clk {
-	clock-frequency = <32768>;
-};
-
-&gether {
-	pinctrl-0 = <&gether_pins>;
-	pinctrl-names = "default";
-
-	phy-mode = "rgmii-id";
-	phy-handle = <&phy0>;
-	renesas,no-ether-link;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	io_expander0: gpio@20 {
-		compatible = "onnn,pca9654";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	io_expander1: gpio@21 {
-		compatible = "onnn,pca9654";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	hdmi@39 {
-		compatible = "adi,adv7511w";
-		reg = <0x39>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
-		avdd-supply = <&d1_8v>;
-		dvdd-supply = <&d1_8v>;
-		pvdd-supply = <&d1_8v>;
-		bgvdd-supply = <&d1_8v>;
-		dvdd-3v-supply = <&d3_3v>;
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7511_in: endpoint {
-					remote-endpoint = <&thc63lvd1024_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
-				};
-			};
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	gmsl0: gmsl-deserializer@48 {
-		compatible = "maxim,max9286";
-		reg = <0x48>;
-
-		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
-		enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-			};
-
-			port@1 {
-				reg = <1>;
-			};
-
-			port@2 {
-				reg = <2>;
-			};
-
-			port@3 {
-				reg = <3>;
-			};
-
-			port@4 {
-				reg = <4>;
-				max9286_out0: endpoint {
-					clock-lanes = <0>;
-					data-lanes = <1 2 3 4>;
-					remote-endpoint = <&csi40_in>;
-				};
-			};
-		};
-
-		i2c-mux {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			i2c@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				status = "disabled";
-			};
-
-			i2c@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <1>;
-
-				status = "disabled";
-			};
-
-			i2c@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <2>;
-
-				status = "disabled";
-			};
-
-			i2c@3 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <3>;
-
-				status = "disabled";
-			};
-		};
-	};
-
-	gmsl1: gmsl-deserializer@4a {
-		compatible = "maxim,max9286";
-		reg = <0x4a>;
-
-		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
-		enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-			};
-
-			port@1 {
-				reg = <1>;
-			};
-
-			port@2 {
-				reg = <2>;
-			};
-
-			port@3 {
-				reg = <3>;
-			};
-
-			port@4 {
-				reg = <4>;
-				max9286_out1: endpoint {
-					clock-lanes = <0>;
-					data-lanes = <1 2 3 4>;
-					remote-endpoint = <&csi41_in>;
-				};
-			};
-		};
-
-		i2c-mux {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			i2c@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				status = "disabled";
-			};
-
-			i2c@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <1>;
-
-				status = "disabled";
-			};
-
-			i2c@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <2>;
-
-				status = "disabled";
-			};
-
-			i2c@3 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <3>;
-
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&lvds0 {
-	status = "okay";
-
-	ports {
-		port@1 {
-			lvds0_out: endpoint {
-				remote-endpoint = <&thc63lvd1024_in>;
-			};
-		};
-	};
-};
-
-&mmc0 {
-	pinctrl-0 = <&mmc_pins>;
-	pinctrl-1 = <&mmc_pins>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&d3_3v>;
-	vqmmc-supply = <&vddq_vin01>;
-	mmc-hs200-1_8v;
-	bus-width = <8>;
-	no-sd;
-	no-sdio;
-	non-removable;
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie_bus_clk {
-	clock-frequency = <100000000>;
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pfc {
-	canfd0_pins: canfd0 {
-		groups = "canfd0_data_a";
-		function = "canfd0";
-	};
-
-	gether_pins: gether {
-		groups = "gether_mdio_a", "gether_rgmii",
-			 "gether_txcrefclk", "gether_txcrefclk_mega";
-		function = "gether";
-	};
-
-	i2c0_pins: i2c0 {
-		groups = "i2c0";
-		function = "i2c0";
-	};
-
-	i2c1_pins: i2c1 {
-		groups = "i2c1";
-		function = "i2c1";
-	};
-
-	mmc_pins: mmc {
-		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
-		function = "mmc";
-		power-source = <1800>;
-	};
-
-	qspi0_pins: qspi0 {
-		groups = "qspi0_ctrl", "qspi0_data4";
-		function = "qspi0";
-	};
-
-	scif0_pins: scif0 {
-		groups = "scif0_data";
-		function = "scif0";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk_b";
-		function = "scif_clk";
-	};
-};
-
-&rpc {
-	pinctrl-0 = <&qspi0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fs512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		spi-rx-bus-width = <4>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bootparam@0 {
-				reg = <0x00000000 0x040000>;
-				read-only;
-			};
-			cr7@40000 {
-				reg = <0x00040000 0x080000>;
-				read-only;
-			};
-			cert_header_sa3@c0000 {
-				reg = <0x000c0000 0x080000>;
-				read-only;
-			};
-			bl2@140000 {
-				reg = <0x00140000 0x040000>;
-				read-only;
-			};
-			cert_header_sa6@180000 {
-				reg = <0x00180000 0x040000>;
-				read-only;
-			};
-			bl31@1c0000 {
-				reg = <0x001c0000 0x460000>;
-				read-only;
-			};
-			uboot@640000 {
-				reg = <0x00640000 0x0c0000>;
-				read-only;
-			};
-			uboot-env@700000 {
-				reg = <0x00700000 0x040000>;
-				read-only;
-			};
-			dtb@740000 {
-				reg = <0x00740000 0x080000>;
-			};
-			kernel@7c0000 {
-				reg = <0x007c0000 0x1400000>;
-			};
-			user@1bc0000 {
-				reg = <0x01bc0000 0x2440000>;
-			};
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
 };