Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: enable 36bit physical address for hardware status page
  drm/i915: fix eDP pipe mask
  drm/i915: fix pixel color depth setting on eDP
  drm/i915: parse eDP panel color depth from VBT block
  drm/i915: disable LVDS downclock by default
  drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register
  drm/i915: Remove chatty execbuf failure message.
  drm/i915: remove loop in Ironlake interrupt handler
  drm/i915: Don't wait interruptible for possible plane buffer flush
  drm/i915: try another possible DDC bus for the SDVO device with multiple outputs
  drm/i915: Read the response after issuing DDC bus switch command
  drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP
  drm/i915: Fix resume regression on MSI Wind U100 w/o KMS
  drm/i915: Fix Ironlake M/N/P ranges to match the spec
  drm/i915: Use find_pll function to calculate DPLL setting for LVDS downclock
  drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list
  drm/i915: disable TV hotplug status check

Trivial conflicts in drivers/gpu/drm/i915/i915_drv.c due to i915
non-modeset suspend fix with different comment.

drivers/char/agp/intel-agp.c

@@ -2460,10 +2460,14 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 				&bridge->mode);
 	}
 
-	if (bridge->driver->mask_memory == intel_i965_mask_memory)
+	if (bridge->driver->mask_memory == intel_i965_mask_memory) {
 		if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36)))
 			dev_err(&intel_private.pcidev->dev,
 				"set gfx device dma mask 36bit failed!\n");
+		else
+			pci_set_consistent_dma_mask(intel_private.pcidev,
+						    DMA_BIT_MASK(36));
+	}
 
 	pci_set_drvdata(pdev, bridge);
 	return agp_add_bridge(bridge);

drivers/gpu/drm/i915/i915_dma.c

@@ -134,6 +134,10 @@ static int i915_init_phys_hws(struct drm_device *dev)
 
 	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
 
+	if (IS_I965G(dev))
+		dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) &
+					     0xf0;
+
 	I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
 	DRM_DEBUG_DRIVER("Enabled hardware status page\n");
 	return 0;

drivers/gpu/drm/i915/i915_drv.c

@@ -45,6 +45,9 @@ module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
 unsigned int i915_powersave = 1;
 module_param_named(powersave, i915_powersave, int, 0400);
 
+unsigned int i915_lvds_downclock = 0;
+module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+
 static struct drm_driver driver;
 
 #define INTEL_VGA_DEVICE(id, info) {		\
@@ -464,8 +467,11 @@ static struct drm_driver driver = {
 	.lastclose = i915_driver_lastclose,
 	.preclose = i915_driver_preclose,
 	.postclose = i915_driver_postclose,
+
+	/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
 	.suspend = i915_suspend,
 	.resume = i915_resume,
+
 	.device_is_agp = i915_driver_device_is_agp,
 	.enable_vblank = i915_enable_vblank,
 	.disable_vblank = i915_disable_vblank,

drivers/gpu/drm/i915/i915_drv.h

@@ -283,6 +283,7 @@ typedef struct drm_i915_private {
 	unsigned int lvds_use_ssc:1;
 	unsigned int edp_support:1;
 	int lvds_ssc_freq;
+	int edp_bpp;
 
 	struct notifier_block lid_notifier;
 
@@ -722,6 +723,7 @@ extern struct drm_ioctl_desc i915_ioctls[];
 extern int i915_max_ioctl;
 extern unsigned int i915_fbpercrtc;
 extern unsigned int i915_powersave;
+extern unsigned int i915_lvds_downclock;
 
 extern void i915_save_display(struct drm_device *dev);
 extern void i915_restore_display(struct drm_device *dev);
@@ -864,6 +866,7 @@ int i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptib
 int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
 int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
 				      int write);
+int i915_gem_object_set_to_display_plane(struct drm_gem_object *obj);
 int i915_gem_attach_phys_object(struct drm_device *dev,
 				struct drm_gem_object *obj, int id);
 void i915_gem_detach_phys_object(struct drm_device *dev,

drivers/gpu/drm/i915/i915_gem.c

@@ -2837,6 +2837,57 @@ i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
 	return 0;
 }
 
+/*
+ * Prepare buffer for display plane. Use uninterruptible for possible flush
+ * wait, as in modesetting process we're not supposed to be interrupted.
+ */
+int
+i915_gem_object_set_to_display_plane(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	uint32_t old_write_domain, old_read_domains;
+	int ret;
+
+	/* Not valid to be called on unbound objects. */
+	if (obj_priv->gtt_space == NULL)
+		return -EINVAL;
+
+	i915_gem_object_flush_gpu_write_domain(obj);
+
+	/* Wait on any GPU rendering and flushing to occur. */
+	if (obj_priv->active) {
+#if WATCH_BUF
+		DRM_INFO("%s: object %p wait for seqno %08x\n",
+			  __func__, obj, obj_priv->last_rendering_seqno);
+#endif
+		ret = i915_do_wait_request(dev, obj_priv->last_rendering_seqno, 0);
+		if (ret != 0)
+			return ret;
+	}
+
+	old_write_domain = obj->write_domain;
+	old_read_domains = obj->read_domains;
+
+	obj->read_domains &= I915_GEM_DOMAIN_GTT;
+
+	i915_gem_object_flush_cpu_write_domain(obj);
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+	obj->read_domains |= I915_GEM_DOMAIN_GTT;
+	obj->write_domain = I915_GEM_DOMAIN_GTT;
+	obj_priv->dirty = 1;
+
+	trace_i915_gem_object_change_domain(obj,
+					    old_read_domains,
+					    old_write_domain);
+
+	return 0;
+}
+
 /**
  * Moves a single object to the CPU read, and possibly write domain.
  *
@@ -4000,8 +4051,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 				  "back to user (%d)\n",
 				  args->buffer_count, ret);
 		}
-	} else {
-		DRM_ERROR("i915_gem_do_execbuffer returns %d\n", ret);
 	}
 
 	drm_free_large(exec_list);

drivers/gpu/drm/i915/i915_irq.c

@@ -274,7 +274,6 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int ret = IRQ_NONE;
 	u32 de_iir, gt_iir, de_ier, pch_iir;
-	u32 new_de_iir, new_gt_iir, new_pch_iir;
 	struct drm_i915_master_private *master_priv;
 
 	/* disable master interrupt before clearing iir  */
@@ -286,51 +285,42 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 	gt_iir = I915_READ(GTIIR);
 	pch_iir = I915_READ(SDEIIR);
 
-	for (;;) {
-		if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
-			break;
-
-		ret = IRQ_HANDLED;
+	if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
+		goto done;
 
-		/* should clear PCH hotplug event before clear CPU irq */
-		I915_WRITE(SDEIIR, pch_iir);
-		new_pch_iir = I915_READ(SDEIIR);
+	ret = IRQ_HANDLED;
 
-		I915_WRITE(DEIIR, de_iir);
-		new_de_iir = I915_READ(DEIIR);
-		I915_WRITE(GTIIR, gt_iir);
-		new_gt_iir = I915_READ(GTIIR);
-
-		if (dev->primary->master) {
-			master_priv = dev->primary->master->driver_priv;
-			if (master_priv->sarea_priv)
-				master_priv->sarea_priv->last_dispatch =
-					READ_BREADCRUMB(dev_priv);
-		}
-
-		if (gt_iir & GT_USER_INTERRUPT) {
-			u32 seqno = i915_get_gem_seqno(dev);
-			dev_priv->mm.irq_gem_seqno = seqno;
-			trace_i915_gem_request_complete(dev, seqno);
-			DRM_WAKEUP(&dev_priv->irq_queue);
-			dev_priv->hangcheck_count = 0;
-			mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
-		}
+	if (dev->primary->master) {
+		master_priv = dev->primary->master->driver_priv;
+		if (master_priv->sarea_priv)
+			master_priv->sarea_priv->last_dispatch =
+				READ_BREADCRUMB(dev_priv);
+	}
 
-		if (de_iir & DE_GSE)
-			ironlake_opregion_gse_intr(dev);
+	if (gt_iir & GT_USER_INTERRUPT) {
+		u32 seqno = i915_get_gem_seqno(dev);
+		dev_priv->mm.irq_gem_seqno = seqno;
+		trace_i915_gem_request_complete(dev, seqno);
+		DRM_WAKEUP(&dev_priv->irq_queue);
+		dev_priv->hangcheck_count = 0;
+		mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
+	}
 
-		/* check event from PCH */
-		if ((de_iir & DE_PCH_EVENT) &&
-			(pch_iir & SDE_HOTPLUG_MASK)) {
-			queue_work(dev_priv->wq, &dev_priv->hotplug_work);
-		}
+	if (de_iir & DE_GSE)
+		ironlake_opregion_gse_intr(dev);
 
-		de_iir = new_de_iir;
-		gt_iir = new_gt_iir;
-		pch_iir = new_pch_iir;
+	/* check event from PCH */
+	if ((de_iir & DE_PCH_EVENT) &&
+	    (pch_iir & SDE_HOTPLUG_MASK)) {
+		queue_work(dev_priv->wq, &dev_priv->hotplug_work);
 	}
 
+	/* should clear PCH hotplug event before clear CPU irq */
+	I915_WRITE(SDEIIR, pch_iir);
+	I915_WRITE(GTIIR, gt_iir);
+	I915_WRITE(DEIIR, de_iir);
+
+done:
 	I915_WRITE(DEIER, de_ier);
 	(void)I915_READ(DEIER);
 

drivers/gpu/drm/i915/i915_reg.h

@@ -1815,7 +1815,7 @@
 #define   DSPFW_PLANEB_SHIFT	8
 #define DSPFW2			0x70038
 #define   DSPFW_CURSORA_MASK	0x00003f00
-#define   DSPFW_CURSORA_SHIFT	16
+#define   DSPFW_CURSORA_SHIFT	8
 #define DSPFW3			0x7003c
 #define   DSPFW_HPLL_SR_EN	(1<<31)
 #define   DSPFW_CURSOR_SR_SHIFT	24

drivers/gpu/drm/i915/intel_bios.c

@@ -33,6 +33,8 @@
 #define	SLAVE_ADDR1	0x70
 #define	SLAVE_ADDR2	0x72
 
+static int panel_type;
+
 static void *
 find_section(struct bdb_header *bdb, int section_id)
 {
@@ -128,6 +130,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 	dev_priv->lvds_dither = lvds_options->pixel_dither;
 	if (lvds_options->panel_type == 0xff)
 		return;
+	panel_type = lvds_options->panel_type;
 
 	lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
 	if (!lvds_lfp_data)
@@ -197,7 +200,8 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 		memset(temp_mode, 0, sizeof(*temp_mode));
 	}
 	kfree(temp_mode);
-	if (temp_downclock < panel_fixed_mode->clock) {
+	if (temp_downclock < panel_fixed_mode->clock &&
+	    i915_lvds_downclock) {
 		dev_priv->lvds_downclock_avail = 1;
 		dev_priv->lvds_downclock = temp_downclock;
 		DRM_DEBUG_KMS("LVDS downclock is found in VBT. ",
@@ -404,6 +408,34 @@ parse_driver_features(struct drm_i915_private *dev_priv,
 		dev_priv->render_reclock_avail = true;
 }
 
+static void
+parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
+{
+	struct bdb_edp *edp;
+
+	edp = find_section(bdb, BDB_EDP);
+	if (!edp) {
+		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp_support) {
+			DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported,\
+				       assume 18bpp panel color depth.\n");
+			dev_priv->edp_bpp = 18;
+		}
+		return;
+	}
+
+	switch ((edp->color_depth >> (panel_type * 2)) & 3) {
+	case EDP_18BPP:
+		dev_priv->edp_bpp = 18;
+		break;
+	case EDP_24BPP:
+		dev_priv->edp_bpp = 24;
+		break;
+	case EDP_30BPP:
+		dev_priv->edp_bpp = 30;
+		break;
+	}
+}
+
 static void
 parse_device_mapping(struct drm_i915_private *dev_priv,
 		       struct bdb_header *bdb)
@@ -521,6 +553,7 @@ intel_init_bios(struct drm_device *dev)
 	parse_sdvo_device_mapping(dev_priv, bdb);
 	parse_device_mapping(dev_priv, bdb);
 	parse_driver_features(dev_priv, bdb);
+	parse_edp(dev_priv, bdb);
 
 	pci_unmap_rom(pdev, bios);
 

drivers/gpu/drm/i915/intel_bios.h

@@ -98,6 +98,7 @@ struct vbios_data {
 #define BDB_SDVO_LVDS_PNP_IDS	 24
 #define BDB_SDVO_LVDS_POWER_SEQ	 25
 #define BDB_TV_OPTIONS		 26
+#define BDB_EDP			 27
 #define BDB_LVDS_OPTIONS	 40
 #define BDB_LVDS_LFP_DATA_PTRS	 41
 #define BDB_LVDS_LFP_DATA	 42
@@ -426,6 +427,45 @@ struct bdb_driver_features {
 	u8 custom_vbt_version;
 } __attribute__((packed));
 
+#define EDP_18BPP	0
+#define EDP_24BPP	1
+#define EDP_30BPP	2
+#define EDP_RATE_1_62	0
+#define EDP_RATE_2_7	1
+#define EDP_LANE_1	0
+#define EDP_LANE_2	1
+#define EDP_LANE_4	3
+#define EDP_PREEMPHASIS_NONE	0
+#define EDP_PREEMPHASIS_3_5dB	1
+#define EDP_PREEMPHASIS_6dB	2
+#define EDP_PREEMPHASIS_9_5dB	3
+#define EDP_VSWING_0_4V		0
+#define EDP_VSWING_0_6V		1
+#define EDP_VSWING_0_8V		2
+#define EDP_VSWING_1_2V		3
+
+struct edp_power_seq {
+	u16 t3;
+	u16 t7;
+	u16 t9;
+	u16 t10;
+	u16 t12;
+} __attribute__ ((packed));
+
+struct edp_link_params {
+	u8 rate:4;
+	u8 lanes:4;
+	u8 preemphasis:4;
+	u8 vswing:4;
+} __attribute__ ((packed));
+
+struct bdb_edp {
+	struct edp_power_seq power_seqs[16];
+	u32 color_depth;
+	u32 sdrrs_msa_timing_delay;
+	struct edp_link_params link_params[16];
+} __attribute__ ((packed));
+
 bool intel_init_bios(struct drm_device *dev);
 
 /*

drivers/gpu/drm/i915/intel_display.c

@@ -70,8 +70,6 @@ struct intel_limit {
     intel_p2_t	    p2;
     bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
 		      int, int, intel_clock_t *);
-    bool (* find_reduced_pll)(const intel_limit_t *, struct drm_crtc *,
-			      int, int, intel_clock_t *);
 };
 
 #define I8XX_DOT_MIN		  25000
@@ -243,11 +241,11 @@ struct intel_limit {
 #define IRONLAKE_VCO_MIN         1760000
 #define IRONLAKE_VCO_MAX         3510000
 #define IRONLAKE_N_MIN           1
-#define IRONLAKE_N_MAX           5
+#define IRONLAKE_N_MAX           6
 #define IRONLAKE_M_MIN           79
-#define IRONLAKE_M_MAX           118
+#define IRONLAKE_M_MAX           127
 #define IRONLAKE_M1_MIN          12
-#define IRONLAKE_M1_MAX          23
+#define IRONLAKE_M1_MAX          22
 #define IRONLAKE_M2_MIN          5
 #define IRONLAKE_M2_MAX          9
 #define IRONLAKE_P_SDVO_DAC_MIN  5
@@ -274,9 +272,6 @@ static bool
 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 		    int target, int refclk, intel_clock_t *best_clock);
 static bool
-intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
-			    int target, int refclk, intel_clock_t *best_clock);
-static bool
 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock);
 
@@ -299,7 +294,6 @@ static const intel_limit_t intel_limits_i8xx_dvo = {
 	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 		 .p2_slow = I8XX_P2_SLOW,	.p2_fast = I8XX_P2_FAST },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 
 static const intel_limit_t intel_limits_i8xx_lvds = {
@@ -314,7 +308,6 @@ static const intel_limit_t intel_limits_i8xx_lvds = {
 	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 		 .p2_slow = I8XX_P2_LVDS_SLOW,	.p2_fast = I8XX_P2_LVDS_FAST },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 	
 static const intel_limit_t intel_limits_i9xx_sdvo = {
@@ -329,7 +322,6 @@ static const intel_limit_t intel_limits_i9xx_sdvo = {
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 
 static const intel_limit_t intel_limits_i9xx_lvds = {
@@ -347,7 +339,6 @@ static const intel_limit_t intel_limits_i9xx_lvds = {
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_FAST },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 
     /* below parameter and function is for G4X Chipset Family*/
@@ -365,7 +356,6 @@ static const intel_limit_t intel_limits_g4x_sdvo = {
 		 .p2_fast = G4X_P2_SDVO_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-	.find_reduced_pll = intel_g4x_find_best_PLL,
 };
 
 static const intel_limit_t intel_limits_g4x_hdmi = {
@@ -382,7 +372,6 @@ static const intel_limit_t intel_limits_g4x_hdmi = {
 		 .p2_fast = G4X_P2_HDMI_DAC_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-	.find_reduced_pll = intel_g4x_find_best_PLL,
 };
 
 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
@@ -407,7 +396,6 @@ static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
 		 .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-	.find_reduced_pll = intel_g4x_find_best_PLL,
 };
 
 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
@@ -432,7 +420,6 @@ static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
 		 .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-	.find_reduced_pll = intel_g4x_find_best_PLL,
 };
 
 static const intel_limit_t intel_limits_g4x_display_port = {
@@ -470,7 +457,6 @@ static const intel_limit_t intel_limits_pineview_sdvo = {
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 
 static const intel_limit_t intel_limits_pineview_lvds = {
@@ -486,7 +472,6 @@ static const intel_limit_t intel_limits_pineview_lvds = {
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_SLOW },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 
 static const intel_limit_t intel_limits_ironlake_sdvo = {
@@ -768,46 +753,6 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 	return (err != target);
 }
 
-
-static bool
-intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
-			    int target, int refclk, intel_clock_t *best_clock)
-
-{
-	struct drm_device *dev = crtc->dev;
-	intel_clock_t clock;
-	int err = target;
-	bool found = false;
-
-	memcpy(&clock, best_clock, sizeof(intel_clock_t));
-
-	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
-		for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) {
-			/* m1 is always 0 in Pineview */
-			if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
-				break;
-			for (clock.n = limit->n.min; clock.n <= limit->n.max;
-			     clock.n++) {
-				int this_err;
-
-				intel_clock(dev, refclk, &clock);
-
-				if (!intel_PLL_is_valid(crtc, &clock))
-					continue;
-
-				this_err = abs(clock.dot - target);
-				if (this_err < err) {
-					*best_clock = clock;
-					err = this_err;
-					found = true;
-				}
-			}
-		}
-	}
-
-	return found;
-}
-
 static bool
 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock)
@@ -1262,7 +1207,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		return ret;
 	}
 
-	ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+	ret = i915_gem_object_set_to_display_plane(obj);
 	if (ret != 0) {
 		i915_gem_object_unpin(obj);
 		mutex_unlock(&dev->struct_mutex);
@@ -2910,10 +2855,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
-	if (is_lvds && limit->find_reduced_pll &&
-			dev_priv->lvds_downclock_avail) {
-		memcpy(&reduced_clock, &clock, sizeof(intel_clock_t));
-		has_reduced_clock = limit->find_reduced_pll(limit, crtc,
+	if (is_lvds && dev_priv->lvds_downclock_avail) {
+		has_reduced_clock = limit->find_pll(limit, crtc,
 							    dev_priv->lvds_downclock,
 							    refclk,
 							    &reduced_clock);
@@ -2981,6 +2924,21 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 				temp |= PIPE_8BPC;
 			else
 				temp |= PIPE_6BPC;
+		} else if (is_edp) {
+			switch (dev_priv->edp_bpp/3) {
+			case 8:
+				temp |= PIPE_8BPC;
+				break;
+			case 10:
+				temp |= PIPE_10BPC;
+				break;
+			case 6:
+				temp |= PIPE_6BPC;
+				break;
+			case 12:
+				temp |= PIPE_12BPC;
+				break;
+			}
 		} else
 			temp |= PIPE_8BPC;
 		I915_WRITE(pipeconf_reg, temp);

drivers/gpu/drm/i915/intel_dp.c

@@ -125,9 +125,15 @@ intel_dp_link_clock(uint8_t link_bw)
 
 /* I think this is a fiction */
 static int
-intel_dp_link_required(int pixel_clock)
+intel_dp_link_required(struct drm_device *dev,
+		       struct intel_output *intel_output, int pixel_clock)
 {
-	return pixel_clock * 3;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (IS_eDP(intel_output))
+		return (pixel_clock * dev_priv->edp_bpp) / 8;
+	else
+		return pixel_clock * 3;
 }
 
 static int
@@ -138,7 +144,8 @@ intel_dp_mode_valid(struct drm_connector *connector,
 	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
 	int max_lanes = intel_dp_max_lane_count(intel_output);
 
-	if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+	if (intel_dp_link_required(connector->dev, intel_output, mode->clock)
+			> max_link_clock * max_lanes)
 		return MODE_CLOCK_HIGH;
 
 	if (mode->clock < 10000)
@@ -492,7 +499,8 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		for (clock = 0; clock <= max_clock; clock++) {
 			int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
 
-			if (intel_dp_link_required(mode->clock) <= link_avail) {
+			if (intel_dp_link_required(encoder->dev, intel_output, mode->clock)
+					<= link_avail) {
 				dp_priv->link_bw = bws[clock];
 				dp_priv->lane_count = lane_count;
 				adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
@@ -1289,53 +1297,7 @@ intel_dp_hot_plug(struct intel_output *intel_output)
 	if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
 		intel_dp_check_link_status(intel_output);
 }
-/*
- * Enumerate the child dev array parsed from VBT to check whether
- * the given DP is present.
- * If it is present, return 1.
- * If it is not present, return false.
- * If no child dev is parsed from VBT, it is assumed that the given
- * DP is present.
- */
-static int dp_is_present_in_vbt(struct drm_device *dev, int dp_reg)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct child_device_config *p_child;
-	int i, dp_port, ret;
-
-	if (!dev_priv->child_dev_num)
-		return 1;
-
-	dp_port = 0;
-	if (dp_reg == DP_B || dp_reg == PCH_DP_B)
-		dp_port = PORT_IDPB;
-	else if (dp_reg == DP_C || dp_reg == PCH_DP_C)
-		dp_port = PORT_IDPC;
-	else if (dp_reg == DP_D || dp_reg == PCH_DP_D)
-		dp_port = PORT_IDPD;
-
-	ret = 0;
-	for (i = 0; i < dev_priv->child_dev_num; i++) {
-		p_child = dev_priv->child_dev + i;
-		/*
-		 * If the device type is not DP, continue.
-		 */
-		if (p_child->device_type != DEVICE_TYPE_DP &&
-			p_child->device_type != DEVICE_TYPE_eDP)
-			continue;
-		/* Find the eDP port */
-		if (dp_reg == DP_A && p_child->device_type == DEVICE_TYPE_eDP) {
-			ret = 1;
-			break;
-		}
-		/* Find the DP port */
-		if (p_child->dvo_port == dp_port) {
-			ret = 1;
-			break;
-		}
-	}
-	return ret;
-}
+
 void
 intel_dp_init(struct drm_device *dev, int output_reg)
 {
@@ -1345,10 +1307,6 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 	struct intel_dp_priv *dp_priv;
 	const char *name = NULL;
 
-	if (!dp_is_present_in_vbt(dev, output_reg)) {
-		DRM_DEBUG_KMS("DP is not present. Ignore it\n");
-		return;
-	}
 	intel_output = kcalloc(sizeof(struct intel_output) + 
 			       sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
 	if (!intel_output)
@@ -1373,11 +1331,10 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 	else if (output_reg == DP_D || output_reg == PCH_DP_D)
 		intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
 
-	if (IS_eDP(intel_output)) {
-		intel_output->crtc_mask = (1 << 1);
+	if (IS_eDP(intel_output))
 		intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
-	} else
-		intel_output->crtc_mask = (1 << 0) | (1 << 1);
+
+	intel_output->crtc_mask = (1 << 0) | (1 << 1);
 	connector->interlace_allowed = true;
 	connector->doublescan_allowed = 0;
 

drivers/gpu/drm/i915/intel_hdmi.c

@@ -225,52 +225,6 @@ static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {
 	.destroy = intel_hdmi_enc_destroy,
 };
 
-/*
- * Enumerate the child dev array parsed from VBT to check whether
- * the given HDMI is present.
- * If it is present, return 1.
- * If it is not present, return false.
- * If no child dev is parsed from VBT, it assumes that the given
- * HDMI is present.
- */
-static int hdmi_is_present_in_vbt(struct drm_device *dev, int hdmi_reg)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct child_device_config *p_child;
-	int i, hdmi_port, ret;
-
-	if (!dev_priv->child_dev_num)
-		return 1;
-
-	if (hdmi_reg == SDVOB)
-		hdmi_port = DVO_B;
-	else if (hdmi_reg == SDVOC)
-		hdmi_port = DVO_C;
-	else if (hdmi_reg == HDMIB)
-		hdmi_port = DVO_B;
-	else if (hdmi_reg == HDMIC)
-		hdmi_port = DVO_C;
-	else if (hdmi_reg == HDMID)
-		hdmi_port = DVO_D;
-	else
-		return 0;
-
-	ret = 0;
-	for (i = 0; i < dev_priv->child_dev_num; i++) {
-		p_child = dev_priv->child_dev + i;
-		/*
-		 * If the device type is not HDMI, continue.
-		 */
-		if (p_child->device_type != DEVICE_TYPE_HDMI)
-			continue;
-		/* Find the HDMI port */
-		if (p_child->dvo_port == hdmi_port) {
-			ret = 1;
-			break;
-		}
-	}
-	return ret;
-}
 void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -278,10 +232,6 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 	struct intel_output *intel_output;
 	struct intel_hdmi_priv *hdmi_priv;
 
-	if (!hdmi_is_present_in_vbt(dev, sdvox_reg)) {
-		DRM_DEBUG_KMS("HDMI is not present. Ignored it \n");
-		return;
-	}
 	intel_output = kcalloc(sizeof(struct intel_output) +
 			       sizeof(struct intel_hdmi_priv), 1, GFP_KERNEL);
 	if (!intel_output)

drivers/gpu/drm/i915/intel_lvds.c

@@ -601,6 +601,20 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder,
 
 /* Some lid devices report incorrect lid status, assume they're connected */
 static const struct dmi_system_id bad_lid_status[] = {
+	{
+		.ident = "Compaq nx9020",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_BOARD_NAME, "3084"),
+		},
+	},
+	{
+		.ident = "Samsung SX20S",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "SX20S"),
+		},
+	},
 	{
 		.ident = "Aspire One",
 		.matches = {
@@ -912,7 +926,8 @@ static void intel_find_lvds_downclock(struct drm_device *dev,
 		}
 	}
 	mutex_unlock(&dev->mode_config.mutex);
-	if (temp_downclock < panel_fixed_mode->clock) {
+	if (temp_downclock < panel_fixed_mode->clock &&
+	    i915_lvds_downclock) {
 		/* We found the downclock for LVDS. */
 		dev_priv->lvds_downclock_avail = 1;
 		dev_priv->lvds_downclock = temp_downclock;

drivers/gpu/drm/i915/intel_sdvo.c

@@ -462,14 +462,63 @@ static int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode)
 }
 
 /**
- * Don't check status code from this as it switches the bus back to the
- * SDVO chips which defeats the purpose of doing a bus switch in the first
- * place.
+ * Try to read the response after issuie the DDC switch command. But it
+ * is noted that we must do the action of reading response and issuing DDC
+ * switch command in one I2C transaction. Otherwise when we try to start
+ * another I2C transaction after issuing the DDC bus switch, it will be
+ * switched to the internal SDVO register.
  */
 static void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output,
 					      u8 target)
 {
-	intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	u8 out_buf[2], cmd_buf[2], ret_value[2], ret;
+	struct i2c_msg msgs[] = {
+		{
+			.addr = sdvo_priv->slave_addr >> 1,
+			.flags = 0,
+			.len = 2,
+			.buf = out_buf,
+		},
+		/* the following two are to read the response */
+		{
+			.addr = sdvo_priv->slave_addr >> 1,
+			.flags = 0,
+			.len = 1,
+			.buf = cmd_buf,
+		},
+		{
+			.addr = sdvo_priv->slave_addr >> 1,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = ret_value,
+		},
+	};
+
+	intel_sdvo_debug_write(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH,
+					&target, 1);
+	/* write the DDC switch command argument */
+	intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0, target);
+
+	out_buf[0] = SDVO_I2C_OPCODE;
+	out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH;
+	cmd_buf[0] = SDVO_I2C_CMD_STATUS;
+	cmd_buf[1] = 0;
+	ret_value[0] = 0;
+	ret_value[1] = 0;
+
+	ret = i2c_transfer(intel_output->i2c_bus, msgs, 3);
+	if (ret != 3) {
+		/* failure in I2C transfer */
+		DRM_DEBUG_KMS("I2c transfer returned %d\n", ret);
+		return;
+	}
+	if (ret_value[0] != SDVO_CMD_STATUS_SUCCESS) {
+		DRM_DEBUG_KMS("DDC switch command returns response %d\n",
+					ret_value[0]);
+		return;
+	}
+	return;
 }
 
 static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1)
@@ -1579,6 +1628,32 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
 	edid = drm_get_edid(&intel_output->base,
 			    intel_output->ddc_bus);
 
+	/* This is only applied to SDVO cards with multiple outputs */
+	if (edid == NULL && intel_sdvo_multifunc_encoder(intel_output)) {
+		uint8_t saved_ddc, temp_ddc;
+		saved_ddc = sdvo_priv->ddc_bus;
+		temp_ddc = sdvo_priv->ddc_bus >> 1;
+		/*
+		 * Don't use the 1 as the argument of DDC bus switch to get
+		 * the EDID. It is used for SDVO SPD ROM.
+		 */
+		while(temp_ddc > 1) {
+			sdvo_priv->ddc_bus = temp_ddc;
+			edid = drm_get_edid(&intel_output->base,
+				intel_output->ddc_bus);
+			if (edid) {
+				/*
+				 * When we can get the EDID, maybe it is the
+				 * correct DDC bus. Update it.
+				 */
+				sdvo_priv->ddc_bus = temp_ddc;
+				break;
+			}
+			temp_ddc >>= 1;
+		}
+		if (edid == NULL)
+			sdvo_priv->ddc_bus = saved_ddc;
+	}
 	/* when there is no edid and no monitor is connected with VGA
 	 * port, try to use the CRT ddc to read the EDID for DVI-connector
 	 */

drivers/gpu/drm/i915/intel_tv.c

@@ -1840,8 +1840,6 @@ intel_tv_init(struct drm_device *dev)
 	drm_connector_attach_property(connector,
 				   dev->mode_config.tv_bottom_margin_property,
 				   tv_priv->margin[TV_MARGIN_BOTTOM]);
-
-	dev_priv->hotplug_supported_mask |= TV_HOTPLUG_INT_STATUS;
 out:
 	drm_sysfs_connector_add(connector);
 }