iio: reword help text of several IIO_ST drivers

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: "Denis Ciocca" <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/accel/Kconfig

@@ -33,8 +33,8 @@ config IIO_ST_ACCEL_3AXIS
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
 	  LIS331DLH, LSM303DL, LSM303DLM, LSM330.
 
-	  This driver can also be built as a module. If so, will be created
-	  these modules:
+	  This driver can also be built as a module. If so, these modules
+	  will be created:
 	  - st_accel (core functions for the driver [it is mandatory]);
 	  - st_accel_i2c (necessary for the I2C devices [optional*]);
 	  - st_accel_spi (necessary for the SPI devices [optional*]);

drivers/iio/gyro/Kconfig

@@ -58,8 +58,8 @@ config IIO_ST_GYRO_3AXIS
 	  Say yes here to build support for STMicroelectronics gyroscopes:
 	  L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330.
 
-	  This driver can also be built as a module. If so, will be created
-	  these modules:
+	  This driver can also be built as a module. If so, these modules
+	  will be created:
 	  - st_gyro (core functions for the driver [it is mandatory]);
 	  - st_gyro_i2c (necessary for the I2C devices [optional*]);
 	  - st_gyro_spi (necessary for the SPI devices [optional*]);

drivers/iio/magnetometer/Kconfig

@@ -36,8 +36,8 @@ config IIO_ST_MAGN_3AXIS
 	  Say yes here to build support for STMicroelectronics magnetometers:
 	  LSM303DLHC, LSM303DLM, LIS3MDL.
 
-	  This driver can also be built as a module. If so, will be created
-	  these modules:
+	  This driver can also be built as a module. If so, these modules
+	  will be created:
 	  - st_magn (core functions for the driver [it is mandatory]);
 	  - st_magn_i2c (necessary for the I2C devices [optional*]);
 	  - st_magn_spi (necessary for the SPI devices [optional*]);

drivers/iio/pressure/Kconfig

@@ -14,8 +14,8 @@ config IIO_ST_PRESS
 	  Say yes here to build support for STMicroelectronics pressure
 	  sensors: LPS331AP.
 
-	  This driver can also be built as a module. If so, will be created
-	  these modules:
+	  This driver can also be built as a module. If so, these modules
+	  will be created:
 	  - st_pressure (core functions for the driver [it is mandatory]);
 	  - st_pressure_i2c (necessary for the I2C devices [optional*]);
 	  - st_pressure_spi (necessary for the SPI devices [optional*]);