Commit 341f0960 authored by Benoit Parrot's avatar Benoit Parrot Committed by Mauro Carvalho Chehab

media: dt-bindings: ov2659: add powerdown/reset-gpios optional property

Add powerdown-gpios and reset-gpios to the list of optional properties
for the OV2659 camera sensor.
Signed-off-by: default avatarBenoit Parrot <bparrot@ti.com>
Acked-by: default avatarLad, Prabhakar <prabhakar.csengg@gmail.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 85c4043f
......@@ -12,6 +12,12 @@ Required Properties:
- clock-names: should be "xvclk".
- link-frequencies: target pixel clock frequency.
Optional Properties:
- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
Active high with internal pull down resistor.
- reset-gpios: reference to the GPIO connected to the resetb pin, if any.
Active low with internal pull up resistor.
For further reading on port node refer to
Documentation/devicetree/bindings/media/video-interfaces.txt.
......@@ -27,6 +33,9 @@ Example:
clocks = <&clk_ov2659 0>;
clock-names = "xvclk";
powerdown-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
port {
ov2659_0: endpoint {
remote-endpoint = <&vpfe_ep>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment