drm/i915: Revert DisplayPort fast link training feature

It has been found out that in some HW combination the DisplayPort
fast link training feature caused screen flickering. Let's revert
this feature for now until we can ensure that the feature works for
all platforms.

This is a manual revert of commits 5fa836a9 ("drm/i915: DP link
training optimization") and 4e96c977 ("drm/i915: eDP link training
optimization").

Fixes: 5fa836a9 ("drm/i915: DP link training optimization")
Fixes: 4e96c977 ("drm/i915: eDP link training optimization")
Cc: <stable@vger.kernel.org> # v4.2+

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466410226-19543-1-git-send-email-mika.kahola@intel.com
(cherry picked from commit 91df09d9)

drivers/gpu/drm/i915/intel_dp.c

@@ -4977,9 +4977,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 	intel_display_power_get(dev_priv, power_domain);
 
 	if (long_hpd) {
-		/* indicate that we need to restart link training */
-		intel_dp->train_set_valid = false;
-
 		intel_dp_long_pulse(intel_dp->attached_connector);
 		if (intel_dp->is_mst)
 			ret = IRQ_HANDLED;

drivers/gpu/drm/i915/intel_dp_link_training.c

@@ -85,8 +85,7 @@ static bool
 intel_dp_reset_link_train(struct intel_dp *intel_dp,
 			uint8_t dp_train_pat)
 {
-	if (!intel_dp->train_set_valid)
-		memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
+	memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
 	intel_dp_set_signal_levels(intel_dp);
 	return intel_dp_set_link_train(intel_dp, dp_train_pat);
 }
@@ -161,23 +160,6 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
 			break;
 		}
 
-		/*
-		 * if we used previously trained voltage and pre-emphasis values
-		 * and we don't get clock recovery, reset link training values
-		 */
-		if (intel_dp->train_set_valid) {
-			DRM_DEBUG_KMS("clock recovery not ok, reset");
-			/* clear the flag as we are not reusing train set */
-			intel_dp->train_set_valid = false;
-			if (!intel_dp_reset_link_train(intel_dp,
-						       DP_TRAINING_PATTERN_1 |
-						       DP_LINK_SCRAMBLING_DISABLE)) {
-				DRM_ERROR("failed to enable link training\n");
-				return;
-			}
-			continue;
-		}
-
 		/* Check to see if we've tried the max voltage */
 		for (i = 0; i < intel_dp->lane_count; i++)
 			if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
@@ -284,7 +266,6 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
 		/* Make sure clock is still ok */
 		if (!drm_dp_clock_recovery_ok(link_status,
 					      intel_dp->lane_count)) {
-			intel_dp->train_set_valid = false;
 			intel_dp_link_training_clock_recovery(intel_dp);
 			intel_dp_set_link_train(intel_dp,
 						training_pattern |
@@ -301,7 +282,6 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
 
 		/* Try 5 times, then try clock recovery if that fails */
 		if (tries > 5) {
-			intel_dp->train_set_valid = false;
 			intel_dp_link_training_clock_recovery(intel_dp);
 			intel_dp_set_link_train(intel_dp,
 						training_pattern |
@@ -322,10 +302,8 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
 
 	intel_dp_set_idle_link_train(intel_dp);
 
-	if (channel_eq) {
-		intel_dp->train_set_valid = true;
+	if (channel_eq)
 		DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n");
-	}
 }
 
 void intel_dp_stop_link_train(struct intel_dp *intel_dp)

drivers/gpu/drm/i915/intel_drv.h

@@ -863,8 +863,6 @@ struct intel_dp {
 	/* This is called before a link training is starterd */
 	void (*prepare_link_retrain)(struct intel_dp *intel_dp);
 
-	bool train_set_valid;
-
 	/* Displayport compliance testing */
 	unsigned long compliance_test_type;
 	unsigned long compliance_test_data;