drm/radeon: add si dpm quirk list

commit 5615f890 upstream.

This adds a quirks list to fix stability problems with
certain SI boards.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drivers/gpu/drm/radeon/si_dpm.c

@@ -2901,6 +2901,22 @@ static int si_init_smc_spll_table(struct radeon_device *rdev)
 	return ret;
 }
 
+struct si_dpm_quirk {
+	u32 chip_vendor;
+	u32 chip_device;
+	u32 subsys_vendor;
+	u32 subsys_device;
+	u32 max_sclk;
+	u32 max_mclk;
+};
+
+/* cards with dpm stability problems */
+static struct si_dpm_quirk si_dpm_quirk_list[] = {
+	/* PITCAIRN - https://bugs.freedesktop.org/show_bug.cgi?id=76490 */
+	{ PCI_VENDOR_ID_ATI, 0x6810, 0x1462, 0x3036, 0, 120000 },
+	{ 0, 0, 0, 0 },
+};
+
 static void si_apply_state_adjust_rules(struct radeon_device *rdev,
 					struct radeon_ps *rps)
 {
@@ -2911,7 +2927,22 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev,
 	u32 mclk, sclk;
 	u16 vddc, vddci;
 	u32 max_sclk_vddc, max_mclk_vddci, max_mclk_vddc;
+	u32 max_sclk = 0, max_mclk = 0;
 	int i;
+	struct si_dpm_quirk *p = si_dpm_quirk_list;
+
+	/* Apply dpm quirks */
+	while (p && p->chip_device != 0) {
+		if (rdev->pdev->vendor == p->chip_vendor &&
+		    rdev->pdev->device == p->chip_device &&
+		    rdev->pdev->subsystem_vendor == p->subsys_vendor &&
+		    rdev->pdev->subsystem_device == p->subsys_device) {
+			max_sclk = p->max_sclk;
+			max_mclk = p->max_mclk;
+			break;
+		}
+		++p;
+	}
 
 	if ((rdev->pm.dpm.new_active_crtc_count > 1) ||
 	    ni_dpm_vblank_too_short(rdev))
@@ -2965,6 +2996,14 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev,
 			if (ps->performance_levels[i].mclk > max_mclk_vddc)
 				ps->performance_levels[i].mclk = max_mclk_vddc;
 		}
+		if (max_mclk) {
+			if (ps->performance_levels[i].mclk > max_mclk)
+				ps->performance_levels[i].mclk = max_mclk;
+		}
+		if (max_sclk) {
+			if (ps->performance_levels[i].sclk > max_sclk)
+				ps->performance_levels[i].sclk = max_sclk;
+		}
 	}
 
 	/* XXX validate the min clocks required for display */